Re: Bottom Drain

[Bonnie]

pmwebdesigns wrote:
> No actually it was great! Thank you very much.
> You wouldn't believe some of the smart comments I got from another forum.
> The pond I have now is 5x11 3½ ft deep. I'm expanding next month to 15x15
> 4ft deep.
> I want to do this pond right so I don't have to mess with it again except to
> clean.
> I didn't have a bottom drain on the other. Didn't know anything about one
> until someone mention I needed one.
> Trying to make everything I can because on a one salary it isn't much.
> I just bought Greg's CD http://www.geocities.com/bickal2000/pond.htm
> so hopefully I can follow that pretty good. I am not a handywoman. lol
> I bought a sequence pump, huge pump. Liner will be on the way next weekend.
> I'll have mine in the middle of the yard. It will be close to my back patio.
> You got pictures on a website?
> Priss
>
Hi Priss,
My pond is also close to the house. I wanted to enjoy it
year round and I do. I didn't put in a bottom drain at
first but I have added one, using a retro fit drain. This
way I didn't have to cut my liner.
My web site is pitiful right now. I started to work on it
and had to stop because of other work, but it does have a
few photos

--
Bonnie
NJ
http://home.earthlink.net/~maebe43/

[BenignVanilla]

"Lee B." > wrote in message
...
> According to the "experts" you should have one 4" gravity fed drain every
> 10'. To work effectively, you should have a 1/2" drop per foot to the
drain.
> Don't forget the anti-vortex cover over the drain, or it will merely suck
> the water from directly above instead of being forced to draw the water
from
> the bottom. 4" drains are preferred because they will not clog as
readily,
> and if an inquisitive fish *does* go down the drain, it has room to make
it
> to the settling tank on the other end without getting stuck. DIY types can
> jerry-rig a bottom drain very easily using toilet bowl flanges (one below
> the liner and one above) and terra-cotta "bowl" type planters for the
> anti-vortex. If you can get the type of anti-vortex that has an airdome
> attached, it will accomplish two things: a) it will aerate your pond for
> you, and b) the rising bubbles actually draw the bottom stuff towards the
> drain.
<snip>

My BD is a DIY...although I never put my DIY diffuser on last year. I think
this year, I will be doing some swimming to get that done. Right now, I have
the pump running to see how it works to remove leaf matter. So far, not so
good without the diffuser.


--
BV.
www.iheartmypond.com

[BenignVanilla]

"Lee B." > wrote in message
...
> According to the "experts" you should have one 4" gravity fed drain every
> 10'. To work effectively, you should have a 1/2" drop per foot to the
drain.
> Don't forget the anti-vortex cover over the drain, or it will merely suck
> the water from directly above instead of being forced to draw the water
from
> the bottom. 4" drains are preferred because they will not clog as
readily,
> and if an inquisitive fish *does* go down the drain, it has room to make
it
> to the settling tank on the other end without getting stuck. DIY types can
> jerry-rig a bottom drain very easily using toilet bowl flanges (one below
> the liner and one above) and terra-cotta "bowl" type planters for the
> anti-vortex. If you can get the type of anti-vortex that has an airdome
> attached, it will accomplish two things: a) it will aerate your pond for
> you, and b) the rising bubbles actually draw the bottom stuff towards the
> drain.
<snip>

My BD is a DIY...although I never put my DIY diffuser on last year. I think
this year, I will be doing some swimming to get that done. Right now, I have
the pump running to see how it works to remove leaf matter. So far, not so
good without the diffuser.


--
BV.
www.iheartmypond.com

[pmwebdesigns]

Looks very interesting Bonnie.
Thanks very much!
Priss


"Bonnie" > wrote in message
...
> pmwebdesigns wrote:
> > No actually it was great! Thank you very much.
> > You wouldn't believe some of the smart comments I got from another
forum.
> > The pond I have now is 5x11 3½ ft deep. I'm expanding next month to
15x15
> > 4ft deep.
> > I want to do this pond right so I don't have to mess with it again
except to
> > clean.
> > I didn't have a bottom drain on the other. Didn't know anything about
one
> > until someone mention I needed one.
> > Trying to make everything I can because on a one salary it isn't much.
> > I just bought Greg's CD http://www.geocities.com/bickal2000/pond.htm
> > so hopefully I can follow that pretty good. I am not a handywoman. lol
> > I bought a sequence pump, huge pump. Liner will be on the way next
weekend.
> > I'll have mine in the middle of the yard. It will be close to my back
patio.
> > You got pictures on a website?
> > Priss
> >
> Hi Priss,
> My pond is also close to the house. I wanted to enjoy it
> year round and I do. I didn't put in a bottom drain at
> first but I have added one, using a retro fit drain. This
> way I didn't have to cut my liner.
> My web site is pitiful right now. I started to work on it
> and had to stop because of other work, but it does have a
> few photos
>
> --
> Bonnie
> NJ
> http://home.earthlink.net/~maebe43/
>
>

[pmwebdesigns]

Looks very interesting Bonnie.
Thanks very much!
Priss


"Bonnie" > wrote in message
...
> pmwebdesigns wrote:
> > No actually it was great! Thank you very much.
> > You wouldn't believe some of the smart comments I got from another
forum.
> > The pond I have now is 5x11 3½ ft deep. I'm expanding next month to
15x15
> > 4ft deep.
> > I want to do this pond right so I don't have to mess with it again
except to
> > clean.
> > I didn't have a bottom drain on the other. Didn't know anything about
one
> > until someone mention I needed one.
> > Trying to make everything I can because on a one salary it isn't much.
> > I just bought Greg's CD http://www.geocities.com/bickal2000/pond.htm
> > so hopefully I can follow that pretty good. I am not a handywoman. lol
> > I bought a sequence pump, huge pump. Liner will be on the way next
weekend.
> > I'll have mine in the middle of the yard. It will be close to my back
patio.
> > You got pictures on a website?
> > Priss
> >
> Hi Priss,
> My pond is also close to the house. I wanted to enjoy it
> year round and I do. I didn't put in a bottom drain at
> first but I have added one, using a retro fit drain. This
> way I didn't have to cut my liner.
> My web site is pitiful right now. I started to work on it
> and had to stop because of other work, but it does have a
> few photos
>
> --
> Bonnie
> NJ
> http://home.earthlink.net/~maebe43/
>
>

[Lee B.]

Do I understand what you're saying to mean that you have no cover above the
drain? If so, then that's your problem.. Water will take the path of least
resistance: it will draw from straight above rather than be forced to suck
from the bottom. Experiments were made using the lid of a trashcan for a
mold, then filling it with concrete with little PVC "legs" to keep it
elevated above the bottom by an inch or so. It didn't work too well, because
there wasn't enough room for "draw". However, same concept using a terra
cotta bowl, *partially* filled with concrete allows room for the water to
flow - and it will work. However, *some* kind of cover has to be placed
over the open hole or it won't pull from the bottom.

Is that what you meant, or did I misinterpret?

Lee

"BenignVanilla" > wrote in message
...
> <snip>
>
> My BD is a DIY...although I never put my DIY diffuser on last year. I
think
> this year, I will be doing some swimming to get that done. Right now, I
have
> the pump running to see how it works to remove leaf matter. So far, not so
> good without the diffuser.
>
>
> --
> BV.
> www.iheartmypond.com
>
>
>

[Lee B.]

Do I understand what you're saying to mean that you have no cover above the
drain? If so, then that's your problem.. Water will take the path of least
resistance: it will draw from straight above rather than be forced to suck
from the bottom. Experiments were made using the lid of a trashcan for a
mold, then filling it with concrete with little PVC "legs" to keep it
elevated above the bottom by an inch or so. It didn't work too well, because
there wasn't enough room for "draw". However, same concept using a terra
cotta bowl, *partially* filled with concrete allows room for the water to
flow - and it will work. However, *some* kind of cover has to be placed
over the open hole or it won't pull from the bottom.

Is that what you meant, or did I misinterpret?

Lee

"BenignVanilla" > wrote in message
...
> <snip>
>
> My BD is a DIY...although I never put my DIY diffuser on last year. I
think
> this year, I will be doing some swimming to get that done. Right now, I
have
> the pump running to see how it works to remove leaf matter. So far, not so
> good without the diffuser.
>
>
> --
> BV.
> www.iheartmypond.com
>
>
>

[BenignVanilla]

"Lee B." > wrote in message
...
> Do I understand what you're saying to mean that you have no cover above
the
> drain? If so, then that's your problem.. Water will take the path of least
> resistance: it will draw from straight above rather than be forced to suck
> from the bottom. Experiments were made using the lid of a trashcan for a
> mold, then filling it with concrete with little PVC "legs" to keep it
> elevated above the bottom by an inch or so. It didn't work too well,
because
> there wasn't enough room for "draw". However, same concept using a terra
> cotta bowl, *partially* filled with concrete allows room for the water to
> flow - and it will work. However, *some* kind of cover has to be placed
> over the open hole or it won't pull from the bottom.
>
> Is that what you meant, or did I misinterpret?
<snip>

Zactly. I installed the plumbing, the liner, and filled the pond. I have the
diffuser parts, I just never built it and installed it. I know, naughty,
naughty. But with that big hole in the ground...I had to get it full...I
didn't yet have my diffuser designed and didn't want to wait. So this year,
I'll just have to do some swimming.


--
BV.
www.iheartmypond.com

[BenignVanilla]

"Lee B." > wrote in message
...
> Do I understand what you're saying to mean that you have no cover above
the
> drain? If so, then that's your problem.. Water will take the path of least
> resistance: it will draw from straight above rather than be forced to suck
> from the bottom. Experiments were made using the lid of a trashcan for a
> mold, then filling it with concrete with little PVC "legs" to keep it
> elevated above the bottom by an inch or so. It didn't work too well,
because
> there wasn't enough room for "draw". However, same concept using a terra
> cotta bowl, *partially* filled with concrete allows room for the water to
> flow - and it will work. However, *some* kind of cover has to be placed
> over the open hole or it won't pull from the bottom.
>
> Is that what you meant, or did I misinterpret?
<snip>

Zactly. I installed the plumbing, the liner, and filled the pond. I have the
diffuser parts, I just never built it and installed it. I know, naughty,
naughty. But with that big hole in the ground...I had to get it full...I
didn't yet have my diffuser designed and didn't want to wait. So this year,
I'll just have to do some swimming.


--
BV.
www.iheartmypond.com

[Happy'Cam'per]

> I'll just have to do some swimming.
>

I'm pretty Neurotic ;) but the thought of swimming in a Koi Pond (if I had
one) sounds absolutely delicious :)
--
**So long, and thanks for all the fish!**

[Happy'Cam'per]

> I'll just have to do some swimming.
>

I'm pretty Neurotic ;) but the thought of swimming in a Koi Pond (if I had
one) sounds absolutely delicious :)
--
**So long, and thanks for all the fish!**

[~ jan JJsPond.us]

>Alternatively, if you're using one of the retro-fit drains that sits on TOP
>of the liner instead of through it, it will be powered by a pump, so a 2"
>drain can be used.

I use one of these drains, and it uses gravity feed to the filter, not
powered by the pump, and I've seen thru the liner one's powered by a pump.
So I'd say it's the designer, not the drain type that configures the
situation. ;o) ~ jan


~ jan (Do you know where your water quality is?)

[~ jan JJsPond.us]

>Alternatively, if you're using one of the retro-fit drains that sits on TOP
>of the liner instead of through it, it will be powered by a pump, so a 2"
>drain can be used.

I use one of these drains, and it uses gravity feed to the filter, not
powered by the pump, and I've seen thru the liner one's powered by a pump.
So I'd say it's the designer, not the drain type that configures the
situation. ;o) ~ jan


~ jan (Do you know where your water quality is?)

[BenignVanilla]

"~ jan JJsPond.us" > wrote in message
...
> >Alternatively, if you're using one of the retro-fit drains that sits on
TOP
> >of the liner instead of through it, it will be powered by a pump, so a 2"
> >drain can be used.
>
> I use one of these drains, and it uses gravity feed to the filter, not
> powered by the pump, and I've seen thru the liner one's powered by a pump.
> So I'd say it's the designer, not the drain type that configures the
> situation. ;o) ~ jan

My bottom drain is plumbed with 4'' PVC. My home made diffuser has not yet
been installed, so right now all the BD does is circulate water. It has not
done much to remove debris. As soon as the water warms up, I'll be
installing the diffuser.

My plumbing is 'thru the liner' and I use a Bickal Boot. Admittedly, the
clamp I purchased was too small, so my bottom drain is just pipe through
line with the boot, no clamp, no leaks.

--
BV.
www.iheartmypond.com

[BenignVanilla]

"~ jan JJsPond.us" > wrote in message
...
> >Alternatively, if you're using one of the retro-fit drains that sits on
TOP
> >of the liner instead of through it, it will be powered by a pump, so a 2"
> >drain can be used.
>
> I use one of these drains, and it uses gravity feed to the filter, not
> powered by the pump, and I've seen thru the liner one's powered by a pump.
> So I'd say it's the designer, not the drain type that configures the
> situation. ;o) ~ jan

My bottom drain is plumbed with 4'' PVC. My home made diffuser has not yet
been installed, so right now all the BD does is circulate water. It has not
done much to remove debris. As soon as the water warms up, I'll be
installing the diffuser.

My plumbing is 'thru the liner' and I use a Bickal Boot. Admittedly, the
clamp I purchased was too small, so my bottom drain is just pipe through
line with the boot, no clamp, no leaks.

--
BV.
www.iheartmypond.com