EPDM and rubber cement?

[Lee B.]

I need to secure the folds of a EPDM liner. This is NOT a matter of joining
two pieces, just eliminating a flap. Can rubber cement be used instead of
that expensive joining tape? If I had it all to do over, I would have
scrapped that new piece of EPDM in favor of a factory-made, drop-in Permalon
liner . . . but I already had the EPDM. Now I have to deal with the folds.

Suggestions?

Lee

[Phyllis and Jim Hurley]

There is cement for EDPM. may be cheaper than tape

Roofing cement can be used if the fold is glued from the outside.

Jim

"Lee B." > wrote in message
...
> I need to secure the folds of a EPDM liner. This is NOT a matter of
joining
> two pieces, just eliminating a flap. Can rubber cement be used instead of
> that expensive joining tape? If I had it all to do over, I would have
> scrapped that new piece of EPDM in favor of a factory-made, drop-in
Permalon
> liner . . . but I already had the EPDM. Now I have to deal with the folds.
>
> Suggestions?
>
> Lee
>
>

[Phyllis and Jim Hurley]

There is cement for EDPM. may be cheaper than tape

Roofing cement can be used if the fold is glued from the outside.

Jim

"Lee B." > wrote in message
...
> I need to secure the folds of a EPDM liner. This is NOT a matter of
joining
> two pieces, just eliminating a flap. Can rubber cement be used instead of
> that expensive joining tape? If I had it all to do over, I would have
> scrapped that new piece of EPDM in favor of a factory-made, drop-in
Permalon
> liner . . . but I already had the EPDM. Now I have to deal with the folds.
>
> Suggestions?
>
> Lee
>
>

[KenCo]

Phyllis and Jim Hurley wrote:
> There is cement for EDPM. may be cheaper than tape
>
> Roofing cement can be used if the fold is glued from the outside.
>
> Jim


use tire glue, EDPM is just a glorified inner tube :)

clean well and pretend its a huge tire patch


> "Lee B." > wrote in message
> ...
>
>>I need to secure the folds of a EPDM liner. This is NOT a matter of
>
> joining
>
>>two pieces, just eliminating a flap. Can rubber cement be used instead of
>>that expensive joining tape? If I had it all to do over, I would have
>>scrapped that new piece of EPDM in favor of a factory-made, drop-in
>
> Permalon
>
>>liner . . . but I already had the EPDM. Now I have to deal with the folds.
>>
>>Suggestions?
>>
>>Lee
>>
>>
>
>
>


--
--
http://www.kencofish.com Ken Arnold,
401-781-9642 cell 401-225-0556
Importer/Exporter of Goldfish,Koi,rare Predators
Shipping to legal states/countries only!
Permalon liners, Oase & Supreme Pondmaster pumps


Linux (SuSE 8.2) user #329121
Please Note: No trees or animals were harmed in the
sending of this contaminant free message We do concede
that a signicant number of electrons may have been
inconvenienced ;)

[KenCo]

Phyllis and Jim Hurley wrote:
> There is cement for EDPM. may be cheaper than tape
>
> Roofing cement can be used if the fold is glued from the outside.
>
> Jim


use tire glue, EDPM is just a glorified inner tube :)

clean well and pretend its a huge tire patch


> "Lee B." > wrote in message
> ...
>
>>I need to secure the folds of a EPDM liner. This is NOT a matter of
>
> joining
>
>>two pieces, just eliminating a flap. Can rubber cement be used instead of
>>that expensive joining tape? If I had it all to do over, I would have
>>scrapped that new piece of EPDM in favor of a factory-made, drop-in
>
> Permalon
>
>>liner . . . but I already had the EPDM. Now I have to deal with the folds.
>>
>>Suggestions?
>>
>>Lee
>>
>>
>
>
>


--
--
http://www.kencofish.com Ken Arnold,
401-781-9642 cell 401-225-0556
Importer/Exporter of Goldfish,Koi,rare Predators
Shipping to legal states/countries only!
Permalon liners, Oase & Supreme Pondmaster pumps


Linux (SuSE 8.2) user #329121
Please Note: No trees or animals were harmed in the
sending of this contaminant free message We do concede
that a signicant number of electrons may have been
inconvenienced ;)

[Lee B.]

THANKS! I thought I'd be able to do something like that. If it fails, it's
not like I'm gonna lose the contents of the tank - it just won't look quite
as "tidy".

Lee

"KenCo" > wrote in message
...
> Phyllis and Jim Hurley wrote:
> > There is cement for EDPM. may be cheaper than tape
> >
> > Roofing cement can be used if the fold is glued from the outside.
> >
> > Jim
>
>
> use tire glue, EDPM is just a glorified inner tube :)
>
> clean well and pretend its a huge tire patch
>
>
> > "Lee B." > wrote in message
> > ...
> >
> >>I need to secure the folds of a EPDM liner. This is NOT a matter of
> >
> > joining
> >
> >>two pieces, just eliminating a flap. Can rubber cement be used instead
of
> >>that expensive joining tape? If I had it all to do over, I would have
> >>scrapped that new piece of EPDM in favor of a factory-made, drop-in
> >
> > Permalon
> >
> >>liner . . . but I already had the EPDM. Now I have to deal with the
folds.
> >>
> >>Suggestions?
> >>
> >>Lee
> >>
> >>
> >
> >
> >
>
>
> --
> --
> http://www.kencofish.com Ken Arnold,
> 401-781-9642 cell 401-225-0556
> Importer/Exporter of Goldfish,Koi,rare Predators
> Shipping to legal states/countries only!
> Permalon liners, Oase & Supreme Pondmaster pumps
>
>
> Linux (SuSE 8.2) user #329121
> Please Note: No trees or animals were harmed in the
> sending of this contaminant free message We do concede
> that a signicant number of electrons may have been
> inconvenienced ;)
>

[Lee B.]

THANKS! I thought I'd be able to do something like that. If it fails, it's
not like I'm gonna lose the contents of the tank - it just won't look quite
as "tidy".

Lee

"KenCo" > wrote in message
...
> Phyllis and Jim Hurley wrote:
> > There is cement for EDPM. may be cheaper than tape
> >
> > Roofing cement can be used if the fold is glued from the outside.
> >
> > Jim
>
>
> use tire glue, EDPM is just a glorified inner tube :)
>
> clean well and pretend its a huge tire patch
>
>
> > "Lee B." > wrote in message
> > ...
> >
> >>I need to secure the folds of a EPDM liner. This is NOT a matter of
> >
> > joining
> >
> >>two pieces, just eliminating a flap. Can rubber cement be used instead
of
> >>that expensive joining tape? If I had it all to do over, I would have
> >>scrapped that new piece of EPDM in favor of a factory-made, drop-in
> >
> > Permalon
> >
> >>liner . . . but I already had the EPDM. Now I have to deal with the
folds.
> >>
> >>Suggestions?
> >>
> >>Lee
> >>
> >>
> >
> >
> >
>
>
> --
> --
> http://www.kencofish.com Ken Arnold,
> 401-781-9642 cell 401-225-0556
> Importer/Exporter of Goldfish,Koi,rare Predators
> Shipping to legal states/countries only!
> Permalon liners, Oase & Supreme Pondmaster pumps
>
>
> Linux (SuSE 8.2) user #329121
> Please Note: No trees or animals were harmed in the
> sending of this contaminant free message We do concede
> that a signicant number of electrons may have been
> inconvenienced ;)
>