source for acrylic sheet in northern virginia?

[Tom Walton]

I'm setting out to build a sump for a new 75 gallon reef.

Can anyone recommend a supplier in Northern Virginia / Washington DC?

[Billy]

"Tom Walton" > wrote in message
news:1104601479.7847c0c3e2820c19f4b555d83e42bc14@t eranews...
| I'm setting out to build a sump for a new 75 gallon reef.
|
| Can anyone recommend a supplier in Northern Virginia / Washington
DC?
|

Lowes? Gloucester, Newport News, Williamsburg, Winchester,
Gainsville, they're all over the place over there. Home Depot, too,
maybe.

[h153]

I built a skimmer using plastic from http://www.usplastic.com/.

Here is a link to their acrylic sheets:

http://www.usplastic.com/catalog/product.asp?catalog%5Fname=usplastic&category%5Fname=21314&product%5Fid=10477

That project was my first ...it worked fairly well, but I had a hard
time figuring out how to bond the sheets together. I ended up relying
on water pressure from the tank.

Acrylic bonding seems to be tough and finding something that's
non-toxic is even tougher.

Good luck!

[Marc Levenson]

You need a product called Weld-On #4 and #16.

Marc


h153 wrote:

> I built a skimmer using plastic from http://www.usplastic.com/.
>
> Here is a link to their acrylic sheets:
>
> http://www.usplastic.com/catalog/product.asp?catalog%5Fname=usplastic&category%5Fname=21314&product%5Fid=10477
>
> That project was my first ...it worked fairly well, but I had a hard
> time figuring out how to bond the sheets together. I ended up relying
> on water pressure from the tank.
>
> Acrylic bonding seems to be tough and finding something that's
> non-toxic is even tougher.
>
> Good luck!
>

--
Personal Page:
http://www.sparklingfloorservice.com/oanda/index.html
Business Page: http://www.sparklingfloorservice.com
Marine Hobbyist: http://www.melevsreef.com

[John]

I'm in Northern VA. There's Acme Plastics, its off of Edsall road on 395 near
the mixing bowl.

Acme Plastics Inc
5655 General Washington Dr, Alexandria, VA 22312
~John