Overflow comb - noisy?!?

[Siphon]

Hi,

Just ordering a new tank and desiding on the level my internal
overflow chamber should be built on. I'd like the water level in the
115g tank to be approximately 1" - 1,5" from the top of the tank.

For tuning and many other usefull purposes (saving fish from entering
the OF chamber) I have been planning on a comb placed around the edges
of the glass overflow. I'm worried about the possible gushing
waterfall noises the comb might make. Some 600g/h flow through. I
ungerstand, the woter runs smoother without the comb...?

What experiences you have on combs and their level of extra noise?

S

[Marc Levenson]

Using "teeth" or a comb to hold livestock back can possibly backfire on you. In
a recent issue of Reefkeeping Online, the author pointed out that teeth tend to
trap bits of food and algae, and fish will be attracted to this which leads to
them being sucked into (or they jump into) the overflow. Better to have a
smooth edge at the top, which also prevents small bubbles from being introduced
(via teeth) into the next chamber.

To avoid the splashing sound, you want the water level to be high in that area,
but still lower than the display section. About 1.5" to 2" lower. Build a
"durso standpipe" in that overflow chamber to maintain the water level, and
prevent a noisy drain effect. Use Google to look it up.

Marc


Siphon wrote:

> Hi,
>
> Just ordering a new tank and desiding on the level my internal
> overflow chamber should be built on. I'd like the water level in the
> 115g tank to be approximately 1" - 1,5" from the top of the tank.
>
> For tuning and many other usefull purposes (saving fish from entering
> the OF chamber) I have been planning on a comb placed around the edges
> of the glass overflow. I'm worried about the possible gushing
> waterfall noises the comb might make. Some 600g/h flow through. I
> ungerstand, the woter runs smoother without the comb...?
>
> What experiences you have on combs and their level of extra noise?
>
> S

--
Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
Business Page: http://www.sparklingfloorservice.com
Marine Hobbyist: http://www.melevsreef.com

[Mike Spoonenmiass]

Use Google to look it up? You mean you don't have the time to tell him how?

You must be getting burned out or are finally taking my advice in regards to
letting these retards figure it out for themselves.

"Marc Levenson" > wrote in message
...
Using "teeth" or a comb to hold livestock back can possibly backfire on you.
In
a recent issue of Reefkeeping Online, the author pointed out that teeth tend
to
trap bits of food and algae, and fish will be attracted to this which leads
to
them being sucked into (or they jump into) the overflow. Better to have a
smooth edge at the top, which also prevents small bubbles from being
introduced
(via teeth) into the next chamber.

To avoid the splashing sound, you want the water level to be high in that
area,
but still lower than the display section. About 1.5" to 2" lower. Build a
"durso standpipe" in that overflow chamber to maintain the water level, and
prevent a noisy drain effect. Use Google to look it up.

Marc


Siphon wrote:

> Hi,
>
> Just ordering a new tank and desiding on the level my internal
> overflow chamber should be built on. I'd like the water level in the
> 115g tank to be approximately 1" - 1,5" from the top of the tank.
>
> For tuning and many other usefull purposes (saving fish from entering
> the OF chamber) I have been planning on a comb placed around the edges
> of the glass overflow. I'm worried about the possible gushing
> waterfall noises the comb might make. Some 600g/h flow through. I
> ungerstand, the woter runs smoother without the comb...?
>
> What experiences you have on combs and their level of extra noise?
>
> S

--
Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
Business Page: http://www.sparklingfloorservice.com
Marine Hobbyist: http://www.melevsreef.com

[Marc Levenson]

http://www.rl180reef.com/pages/standpipe/standpipe-open.htm

Marc


Mike Spoonenmiass wrote:

> Use Google to look it up? You mean you don't have the time to tell him how?
>
> You must be getting burned out or are finally taking my advice in regards to
> letting these retards figure it out for themselves.

--
Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
Business Page: http://www.sparklingfloorservice.com
Marine Hobbyist: http://www.melevsreef.com

[Mike]

Hi Mike, great last name for a change! Not like Kim Ross or Jamie Ray or
Lilly
or Bob Reath or Ima****head.......

"Mike Spoonenmiass" > wrote in message
news:qnwyb.72852$xV6.3310@lakeread04...
> Use Google to look it up? You mean you don't have the time to tell him
how?
>
> You must be getting burned out or are finally taking my advice in regards
to
> letting these retards figure it out for themselves.
>
> "Marc Levenson" > wrote in message
> ...
> Using "teeth" or a comb to hold livestock back can possibly backfire on
you.
> In
> a recent issue of Reefkeeping Online, the author pointed out that teeth
tend
> to
> trap bits of food and algae, and fish will be attracted to this which
leads
> to
> them being sucked into (or they jump into) the overflow. Better to have a
> smooth edge at the top, which also prevents small bubbles from being
> introduced
> (via teeth) into the next chamber.
>
> To avoid the splashing sound, you want the water level to be high in that
> area,
> but still lower than the display section. About 1.5" to 2" lower. Build
a
> "durso standpipe" in that overflow chamber to maintain the water level,
and
> prevent a noisy drain effect. Use Google to look it up.
>
> Marc
>
>
> Siphon wrote:
>
> > Hi,
> >
> > Just ordering a new tank and desiding on the level my internal
> > overflow chamber should be built on. I'd like the water level in the
> > 115g tank to be approximately 1" - 1,5" from the top of the tank.
> >
> > For tuning and many other usefull purposes (saving fish from entering
> > the OF chamber) I have been planning on a comb placed around the edges
> > of the glass overflow. I'm worried about the possible gushing
> > waterfall noises the comb might make. Some 600g/h flow through. I
> > ungerstand, the woter runs smoother without the comb...?
> >
> > What experiences you have on combs and their level of extra noise?
> >
> > S
>
> --
> Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
> Business Page: http://www.sparklingfloorservice.com
> Marine Hobbyist: http://www.melevsreef.com
>
>
>