PDA

View Full Version : Life Expectancy of Magnum 350 Filter?


Dick
December 18th 05, 06:25 PM
My Magnum 350 filter is going on 6 years old with replacement of only
o-rings and gaskets. It has been making a 'rattling' or 'buzzing' noise for
many months that I don't remember. It is working hard pushing water
through a CO2 reactor. It could be air or CO2 in the impellor area, but I
don't know.

Any idea about this noise?

Any idea of life expectancy for this filter?

Thanks

Dick

December 19th 05, 12:59 PM
It could be the magnet under the propeller that is hitting. That's
what mine did after not very much use. I ordered a new one from Pet
Solutions and it seems much better and quieter. My magnet hit enough
that it got out of balance.

JJ

Bill
December 20th 05, 12:04 AM
" > Spaketh Thusly:

>It could be the magnet under the propeller that is hitting. That's
>what mine did after not very much use. I ordered a new one from Pet
>Solutions and it seems much better and quieter. My magnet hit enough
>that it got out of balance.
When I purchased mine about 5 years ago, I purchased an extra impeller
assembly from PetWarehouse (now DrsFoster&Smith) on the recommendation of a
few people here who said "Have an extra just in case". It's still in the
plastic bag - cheap insurance, IMO.
I've changed the O ring & gaskets, only because the little gasket stretched
out so I bought the whole kit. Everything else is still fine.

Speaking of Mag 350's, what do y'all use in yours? After playing around with
various things for a year, I finally settled on the outer sleeve and just fill
the container with loosely packed floss. Haven't seen anything else work
better or last as long.

--
Bill H. [my "reply to" address is real]
www.necka.net
Molon Labe!

Rich M
December 20th 05, 07:35 PM
> Speaking of Mag 350's, what do y'all use in yours? After playing around with
> various things for a year, I finally settled on the outer sleeve and just fill
> the container with loosely packed floss. Haven't seen anything else work
> better or last as long.

I've experimented a bit as well and settled on loosely packed floss as
well. My 350 is going on 5 years with no problems or parts replacements.

Rich M