acrylic tanks: warping?

[[email protected]]

just wondering whether any of you have acrylic tanks and have found any
warping?

i bought a 55 gallon tank a few months back. i hadn't noticed until
recently, but the front side of the tank is bulging out a little. it's
a little disturbing. is it normal?

i'm sure i'm covered by warranty, but i thought i'd ask just the same.

thanks.

[~Roy~]

All tanks will bulge even glass tanks. The tanks thickness should be
sufficieint to withstand whatever bulge there is. Is there a top brace
perhaps, if so is it broke loose? I have a 210 gal glass and it bows
considerably, as well as my 60 gal glass....

On 14 Feb 2006 14:10:14 -0800, wrote:
>><>just wondering whether any of you have acrylic tanks and have found any
>><>warping?
>><>
>><>i bought a 55 gallon tank a few months back. i hadn't noticed until
>><>recently, but the front side of the tank is bulging out a little. it's
>><>a little disturbing. is it normal?
>><>
>><>i'm sure i'm covered by warranty, but i thought i'd ask just the same.
>><>
>><>thanks.

--
\\\|///
( @ @ )
-----------oOOo(_)oOOo---------------


oooO
---------( )----Oooo----------------
\ ( ( )
\_) ) /
(_/
The original frugal ponder ! Koi-ahoi mates....

[Richard Sexton]

>i bought a 55 gallon tank a few months back. i hadn't noticed until
>recently, but the front side of the tank is bulging out a little. it's
>a little disturbing. is it normal?


Yup.



--
Need Mercedes parts ? - http://parts.mbz.org
Richard Sexton | Mercedes stuff: http://mbz.org
1970 280SE, 72 280SE | Home page: http://rs79.vrx.net
633CSi 250SE/C 300SD | http://aquaria.net http://killi.net

[Fishman]

Acrylic will bow much more than glass. Most acrylic tanks, at least large
ones, will have a slight bow. Even with the cener top brace. Mine is
custom ordered and I specifically asked for a thicker acrylic to reduce the
bow.

Fishman


"~Roy~" > wrote in message
...
> All tanks will bulge even glass tanks. The tanks thickness should be
> sufficieint to withstand whatever bulge there is. Is there a top brace
> perhaps, if so is it broke loose? I have a 210 gal glass and it bows
> considerably, as well as my 60 gal glass....
>
> On 14 Feb 2006 14:10:14 -0800, wrote:
> >><>just wondering whether any of you have acrylic tanks and have found
any
> >><>warping?
> >><>
> >><>i bought a 55 gallon tank a few months back. i hadn't noticed until
> >><>recently, but the front side of the tank is bulging out a little. it's
> >><>a little disturbing. is it normal?
> >><>
> >><>i'm sure i'm covered by warranty, but i thought i'd ask just the same.
> >><>
> >><>thanks.
>
> --
> \\\|///
> ( @ @ )
> -----------oOOo(_)oOOo---------------
>
>
> oooO
> ---------( )----Oooo----------------
> \ ( ( )
> \_) ) /
> (_/
> The original frugal ponder ! Koi-ahoi mates....