Some construction progress pics

[sgrien]

I just put up some pics of my construction so far. Please have a look
and give me some feedback. Constructive critisism welcome. If you have
any ideas to improve on what I have done or what you would do
different, I would appreciate it.

I just threw the page together and hope to spruce it up later and add
to it as I go! Thanks for lookin.

http://www2.cecomet.net/sgrien/index.htm


-Scott

[Joy53]

I enjoyed viewing your construction. Good Luck!
Joy

"sgrien" > wrote in message
om...
> I just put up some pics of my construction so far. Please have a look
> and give me some feedback. Constructive critisism welcome. If you have
> any ideas to improve on what I have done or what you would do
> different, I would appreciate it.
>
> I just threw the page together and hope to spruce it up later and add
> to it as I go! Thanks for lookin.
>
> http://www2.cecomet.net/sgrien/index.htm
>
>
> -Scott

[Dan Norgard]

Hi, Scott;
The only things I would add are plywood shear panels on the sides like you
did for the side against the wall to keep it from racking. And, if that is
just one 2x4, add another plywood stiffener on the inside of the 2x4, but
run the outer grain horizontally, glue and screw.
My 80g has two 2x6s glued to a 3/4 ply stiffener. Your unit will weigh
around 800-900lb when all is said and done.

That 'light mover' is the greatest thing since sliced bread! This will be
better than tv in your place. Keep the pictures coming.

Before you fill, place a stick against the center of the long span and make
a reference mark on the two. As you add water see if the marks move away
from each other. If they do, empty that sucker and beef it up.

Dan

"sgrien" > wrote in message
om...
I just put up some pics of my construction so far. Please have a look
and give me some feedback. Constructive critisism welcome. If you have
any ideas to improve on what I have done or what you would do
different, I would appreciate it.

I just threw the page together and hope to spruce it up later and add
to it as I go! Thanks for lookin.

http://www2.cecomet.net/sgrien/index.htm


-Scott

[Mermaid]

Scott, Wow what a system. That is going to look cool! This is not a
criticism just an observance. I was wondering how are you going to keep the
viewing glass clean? I have enough problems myself keeping mine in the front
clean. But having to keep the back clean will be a challenge. Just
wondering,
Paulette


"sgrien" > wrote in message
om...
> I just put up some pics of my construction so far. Please have a look
> and give me some feedback. Constructive critisism welcome. If you have
> any ideas to improve on what I have done or what you would do
> different, I would appreciate it.
>
> I just threw the page together and hope to spruce it up later and add
> to it as I go! Thanks for lookin.
>
> http://www2.cecomet.net/sgrien/index.htm
>
>
> -Scott

[sgrien]

"Dan Norgard" > wrote in message >...
> Hi, Scott;
> The only things I would add are plywood shear panels on the sides like you
> did for the side against the wall to keep it from racking. And, if that is
> just one 2x4, add another plywood stiffener on the inside of the 2x4, but
> run the outer grain horizontally, glue and screw.
> My 80g has two 2x6s glued to a 3/4 ply stiffener. Your unit will weigh
> around 800-900lb when all is said and done.
>
> That 'light mover' is the greatest thing since sliced bread! This will be
> better than tv in your place. Keep the pictures coming.
>
> Before you fill, place a stick against the center of the long span and make
> a reference mark on the two. As you add water see if the marks move away
> from each other. If they do, empty that sucker and beef it up.
>
> Dan

Thanks for the info Dan,

When it comes to any type of construction where considerable weight is
going to be applied, I always get nervous. I hope that using the extra
plywood stiffener as you suggest will be enough. I plan to attach it
as you suggest and your idea for the reference marks is great. For
future projects or for the benefit of others that share my dilemma, is
anyone aware of any guidelines, rules of thumb, formulas, etc. to
utilize the proper lumber 2x4, 2x6, 4x4, etc. in any given situation?
I have looked around and it seems to be a consensus that a full
aquarium will average about 10 lbs. per gallon. For a 75 Gal. that
would be 750 lbs. but let's round it up to 800 lbs. Can anyone confirm
or deny my following hypothesis: Assume that the tank weight is
distributed evenly around the perimeter of the stand. the tank
measures 48" x 18" giving a perimeter of 132". now 800 lbs/132" =
roughly 6 lbs /inch. I will need to use materials that would fall into
this load range. If this is correct, where can I find out what
material would fall into this category?
There must be a table or chart somewhere!? (Hmmm, maybe I should cross
post to Alt.Woodbutchers) :)

Scott

[Pszemol]

"Mermaid" > wrote in message ...
> I was wondering how are you going to keep the
> viewing glass clean? I have enough problems myself keeping mine in the front
> clean. But having to keep the back clean will be a challenge. Just
> wondering,

What about a regular magnet scraper?

[Richard Reynolds]

> If this is correct, where can I find out what
> material would fall into this category?
> There must be a table or chart somewhere!? (Hmmm, maybe I should cross
> post to Alt.Woodbutchers) :)
>
> Scott


ive posted this before you probibly can groups.google.com it

if not ill post again later today or tomorrow

--
Richard Reynolds

[sgrien]

"Mermaid" > wrote in message >...
> Scott, Wow what a system. That is going to look cool! This is not a
> criticism just an observance. I was wondering how are you going to keep the
> viewing glass clean? I have enough problems myself keeping mine in the front
> clean. But having to keep the back clean will be a challenge. Just
> wondering,
> Paulette
>
Hi Paulette,

I bought the Tunze magnet cleaner to keep the front glass clean.

http://www.marinedepot.com/aquarium_miscellaneous_algae_magnet_cleaners.asp?C artId=

I plan to paint the outside of the glass on the back and sides with
flat black paint and will not be concerned with keeping those surfaces
clean as I hope they will eventually be covered in coralline algae.

Scott

[PurityFailed]

Yet another late-night thought of mine...

Doesn't it seem odd that someone hasn't published a DIY aquaria book yet? I
mean, the author'd probably have a hard time getting any endorsements from
within the industry for obvious reasons but what a useful piece of literature
it would be. A good established fish-lit company could probably produce it
with no big profit loss. I know a good chunk of us folks here would buy it!

On the other hand I'm assuming that the majority of DIY-ers are reef hobbyists
or advanced FW guys. Just read somewhere that only something like 3% of those
that keep fish keep reefs tanks though.

So, I guess what I'm blabbering about is my wish for a book that would have
virtually no global market but would be priceless for the 30 people who bought
it! ;)

Happy Trails,

Jessica
Warning:Fishkeeping is a highly addictive activity that has been proven to have
a detrimental effect on one's social life and wallet. Other side effects may
include loss of hand moisture, C.O.W.S., and familial loss of appetite related
to freezer foods.

[sgrien]

"Richard Reynolds" > wrote in message news:<uKWhc.34597$fq4.3069@lakeread05>...
> > If this is correct, where can I find out what
> > material would fall into this category?
> > There must be a table or chart somewhere!? (Hmmm, maybe I should cross
> > post to Alt.Woodbutchers) :)
> >
> > Scott
>
>
> ive posted this before you probibly can groups.google.com it
>
> if not ill post again later today or tomorrow

I've had no luck finding your post. Could you repost it or direct me to it?

Thanks.

-Scott