FS 125 GAL complete reef in Dallas

[Fred]

Http://www.mymailspot.com/aquarium

[Marc Levenson]

Fred, did you post this on DFWMAS already? Or at least Reef Central?
Nice tank, but I'm actually looking for a larger one.

Marc


Fred wrote:

> Http://www.mymailspot.com/aquarium
>
>

--
Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
Business Page: http://www.sparklingfloorservice.com
Marine Hobbyist: http://www.melevsreef.com

[Fred]

Thanks for the compliment and the tip....I will post it there as well!

Fred
"Marc Levenson" > wrote in message
m...
> Fred, did you post this on DFWMAS already? Or at least Reef Central? Nice
> tank, but I'm actually looking for a larger one.
>
> Marc
>
>
> Fred wrote:
>
>> Http://www.mymailspot.com/aquarium
>>
>>
>
> --
> Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
> Business Page: http://www.sparklingfloorservice.com
> Marine Hobbyist: http://www.melevsreef.com
>

[Dave]

Marc.......how big of a tank are you looking for?
I have a 180 complete setup for sale here in PA.

--
remove NOSPAM from address if replying by email
"Marc Levenson" > wrote in message
m...
> Fred, did you post this on DFWMAS already? Or at least Reef Central?
> Nice tank, but I'm actually looking for a larger one.
>
> Marc
>
>
> Fred wrote:
>
> > Http://www.mymailspot.com/aquarium
> >
> >
>
> --
> Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
> Business Page: http://www.sparklingfloorservice.com
> Marine Hobbyist: http://www.melevsreef.com
>

[Marc Levenson]

I'm on the fence right now. A 180 or a 240, or even a 300 with a
propagation zone are all on the drafting table.

I like the 6x2x2, the 8x2x2, but I also have continually toyed with an
L-shaped tank. Now I'm thinking about a 6x4x2 with an internal set of
walls to make it appear to be an L, with the prop zone on the other side
of the wall.

Marc


Dave wrote:
> Marc.......how big of a tank are you looking for?
> I have a 180 complete setup for sale here in PA.
>

--
Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
Business Page: http://www.sparklingfloorservice.com
Marine Hobbyist: http://www.melevsreef.com

[Dave]

that's cool.........if you decide on a 180......drop me an email

--
remove NONOSPAM from address if replying by email


"Marc Levenson" > wrote in message
om...
> I'm on the fence right now. A 180 or a 240, or even a 300 with a
> propagation zone are all on the drafting table.
>
> I like the 6x2x2, the 8x2x2, but I also have continually toyed with an
> L-shaped tank. Now I'm thinking about a 6x4x2 with an internal set of
> walls to make it appear to be an L, with the prop zone on the other side
> of the wall.
>
> Marc
>
>
> Dave wrote:
> > Marc.......how big of a tank are you looking for?
> > I have a 180 complete setup for sale here in PA.
> >
>
> --
> Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
> Business Page: http://www.sparklingfloorservice.com
> Marine Hobbyist: http://www.melevsreef.com
>

[Don Geddis]

Marc Levenson > wrote on Wed, 07 Jul 2004:
> I like the 6x2x2, the 8x2x2, but I also have continually toyed with an
> L-shaped tank. Now I'm thinking about a 6x4x2 with an internal set of walls
> to make it appear to be an L, with the prop zone on the other side of the
> wall.

I was thinking of building a tank with an internal set of walls as well.
I assume you're planning on acrylic? And perhaps, given what you've done
with sumps, you're going to build the whole thing yourself?

I don't have your talents (or equipment), but I've been contemplating trying
to put together a large tank with a number of compartments. E.g. a (visible)
refugium, a low-flow section for seahorses, a compartment for sea anemones
with clownfish (my current anemones go walking through my corals every once
in awhile), and finally a large section as a typical reef.

It seems pretty straightforward to me, and similar to what some fish stores
have (in order to display separate merchandise for sale). But I haven't seen
many other hobbyists attempt a tank with partitions, so I'm wondering if I'm
missing some critical detail that makes it really difficult.

-- Don
__________________________________________________ _____________________________
Don Geddis http://reef.geddis.org/
Instead of mousetraps, what about baby traps? Not to harm the babies,
but just to hold them down until they can be removed.
-- "Lost" Deep Thoughts by Jack Handey [SNL]

[Marc Levenson]

Don,

I'm really thinking glass. Acrylic simply scratches too easily, and I
know I don't want to be buffing out scratches on a regular basis. Using
GP would help because it is a harder acrylic... but I'm already
scratching the GLASS tanks as it is!

You can make a partitianed tank if you like. Flow will be dictated the
way you configure the plumbing. Try to avoid stagnat zones by keeping
the surface rippling in each section. Or have the all overflow into a
channel. Or have some type of surface skimmming drain to keep
gas-exchange working.

Other than that, sounds like you've got a cool setup planned. :)

Marc


Don Geddis wrote:

> Marc Levenson > wrote on Wed, 07 Jul 2004:
>
>>I like the 6x2x2, the 8x2x2, but I also have continually toyed with an
>>L-shaped tank. Now I'm thinking about a 6x4x2 with an internal set of walls
>>to make it appear to be an L, with the prop zone on the other side of the
>>wall.
>
>
> I was thinking of building a tank with an internal set of walls as well.
> I assume you're planning on acrylic? And perhaps, given what you've done
> with sumps, you're going to build the whole thing yourself?
>
> I don't have your talents (or equipment), but I've been contemplating trying
> to put together a large tank with a number of compartments. E.g. a (visible)
> refugium, a low-flow section for seahorses, a compartment for sea anemones
> with clownfish (my current anemones go walking through my corals every once
> in awhile), and finally a large section as a typical reef.
>
> It seems pretty straightforward to me, and similar to what some fish stores
> have (in order to display separate merchandise for sale). But I haven't seen
> many other hobbyists attempt a tank with partitions, so I'm wondering if I'm
> missing some critical detail that makes it really difficult.
>
> -- Don
> __________________________________________________ _____________________________
> Don Geddis http://reef.geddis.org/
> Instead of mousetraps, what about baby traps? Not to harm the babies,
> but just to hold them down until they can be removed.
> -- "Lost" Deep Thoughts by Jack Handey [SNL]

--
Personal Page: http://www.sparklingfloorservice.com/oanda/index.html
Business Page: http://www.sparklingfloorservice.com
Marine Hobbyist: http://www.melevsreef.com