PDA

View Full Version : Alkalinity problems?


D&M
July 14th 03, 12:54 AM
Just curious if anyone has ever had a problem with high alkalinity? My
tester only reads up to 240ppm, and it's way past that, which accounts for
my high pH, but besides high pH, has anyone ever had any other problems?
I've heard of problems with plants and some fish, most was directed toward
the pH levels involved, but that was about it.

Cheers

Stan
July 14th 03, 02:37 AM
I have. I bought an RO unit so I could manage my environments better.
Since getting into RO and after buying a conductivity meter I focus a
lot less on pH and a lot more on the conductivity.

At sears in the water treatment department, they sell a Hanna TDS meter
for about $20. Its says TDS, but really its conductivity. That meter
will be a good investment.

For a while I bought RO water from the grocery store for a 20 gallon
long Apisto tank. I paid about $180 for a 80 gallon per day RO unit.
It produces about 60 gpd at my city waters temp. For me, it was a great
thing, but I have a basement with plenty of room for all the gear and
storage containers.

Once you understand your water conditions you can decide if it meets
your needs or if you need to alter your choice of fish types.



"D&M" > wrote in message
...
> Just curious if anyone has ever had a problem with high alkalinity? My
> tester only reads up to 240ppm, and it's way past that, which accounts
for
> my high pH, but besides high pH, has anyone ever had any other
problems?
> I've heard of problems with plants and some fish, most was directed
toward
> the pH levels involved, but that was about it.
>
> Cheers
>
>

NetMax
July 14th 03, 03:13 AM
"D&M" > wrote in message
...
> Just curious if anyone has ever had a problem with high alkalinity? My
> tester only reads up to 240ppm, and it's way past that, which accounts
for
> my high pH, but besides high pH, has anyone ever had any other
problems?
> I've heard of problems with plants and some fish, most was directed
toward
> the pH levels involved, but that was about it.
>
> Cheers

kH is usually equal or lower than gH, so knowing your gH could be more
important. You can offset your tester's threshold by diluting your
mixture. Cut your water sample in half using RO (or distilled water) and
repeat the test, or switch to a titration test. A concentration of
240ppm is only 13dkH, which is not terribly high, but typical for many
wells.

I've often read that kH does not affect fish (I'm not entirely
convinced). There have been discussions on whether certain fishes might
be kH susceptible (like Neons and Otos which exhibit a fragility which is
difficult to explain sometimes). I've never seen anything conclusive.
The biggest legitimate concerns are if the kH is lower than 4 or 5dkH
(making the water more prone to pH instability) and if the kH is high
(making the water difficult to acidify). Other than that, our attention
is usually on the pH & gH.

NetMax

Racf
July 14th 03, 05:06 PM
Stan here, using my original handle again.

If the tap water filter is a Deionizer (DI) then you should
re-constitute the water maybe a little. If it just a carbon filter then
sure it removes metals and chlorine, but the salts and most minerals go
right through it. Electrolytes are key to fresh water fish. They are in
water unless great pain is taken to remove them, like RO/DI.

Tap water should be OK.

Of course there are always exceptions for weird fish, but they are
exceptions. New fish from the store will need some extra protection and
special acclimation to your tank. The key is the TDS/conductivity of
the source and target water. Get a conductivity meter or a TDS meter
(which is really the same thing in the range us humans could afford).
Do not worry about the pH unless your gonna inject CO2 and all that
baloney.

Products you need:

Amquel
NovaAqua
PolyAqua

There are all Kordon products. Sure there are many others on the
market, but they were first and some believe the best. You will use the
Amquel the most followed by the other two when dealing with transferring
fish. The Poly is the most extreme fish care. It puts a slime coat on
a fish like nothing else you will ever see.

I imagine your declorinator will be OK, but its probably not
Amquel.....and it takes care of Chlorine, chloramine, and free ammonia.

Anyway, acclimate new fish via the drip method. Slowly match up the TDS
readings between the source water (fish bag) to your tank. Slow slow
slow. No more than a TDS change of 50 per 1/2 hour......

Of course you want to make sure the fish you buy are not already jacked.
Since you have a reef tank I guess you probably into this stuff pretty
much except fresh water varies big time, while salt water really is salt
water....

Again, do not worry about the pH....although once in a blue moon you may
want to peek.

PS. Take your TDS meter to the fish store and measure the tank your
fish is coming out of. They many times add something to the bagged
water like a bag buddy or a squirt of something else.

You can phase out the Nova after your tank is running a while and fish
are in good shape.



--

-------------------------------------
For email remove junk
leaving the IP Addrress
Thats all from Racf
-------------------------------------
"Vincent Femia" > wrote in message
et...
> Stan,
> Thanks for that info. Actually I probably should create a new thread
for
> this. So I apologize in advance. I use a product by Aquarium Pharm.
called
> tap water filter. It claims to remove chlorine and other metals from
the
> water. I use this water on my FOWLR (fish only with live rock) salt
tank.
> So far I have no complaints with it. I recently setup a 29 gallon
freshwater
> tank and it is becoming a planted tank. So I ask my LFS if I would
need to
> add anything to the water, since with the sal****er tank I add the sea
salt
> mix. He said that I would need to replace the electrolytes in the
fresh
> water since I was removing some of the trace elements as well as bad
stuff
> in the water. I don't recall the product he recommended but do you
believe
> that he is trying to sell me something else or is there merit in his
> recommendation? At this point I still use tap water and treat it with
a
> dechlorinator. I've been too lazy to actually use the "filtered"
water. What
> do you think?
>
> Thanks,
> Vinny
>
> "Stan" > wrote in message
> ...
> > Yes....sometimes. For Apistos just straight RO. For breeding
Angels
> > just straight RO. For Angel grow-out, I gradually adapt them back
to my
> > tap water...very hard and pH of 8.2. Growing Discus: I mix in
Calcium
> > Sulfate, Sea Salt, and Epsom salts and sometimes a bit of baking
soda.
> > If I were breeding them, it would be straight RO.
> >
> > The Apisto and Angel breeder tanks stay around a TDS of 40 - 80. I
> > change 1/2 my water every week. I dose some plant supplements that
add
> > some minerals.
> >
> >
> > "Vincent Femia" > wrote in message
> > t...
> > > Stan,
> > > Do you use any additives to the RO water?
> > > Thanks
> > > Vinny
> > >
> > > "Stan" > wrote in message
> > > ...
> > > > I have. I bought an RO unit so I could manage my environments
> > better.
> > > > Since getting into RO and after buying a conductivity meter I
focus
> > a
> > > > lot less on pH and a lot more on the conductivity.
> > > >
> > > > At sears in the water treatment department, they sell a Hanna
TDS
> > meter
> > > > for about $20. Its says TDS, but really its conductivity. That
> > meter
> > > > will be a good investment.
> > > >
> > > > For a while I bought RO water from the grocery store for a 20
gallon
> > > > long Apisto tank. I paid about $180 for a 80 gallon per day RO
> > unit.
> > > > It produces about 60 gpd at my city waters temp. For me, it was
a
> > great
> > > > thing, but I have a basement with plenty of room for all the
gear
> > and
> > > > storage containers.
> > > >
> > > > Once you understand your water conditions you can decide if it
meets
> > > > your needs or if you need to alter your choice of fish types.
> > > >
> > > >
> > > >
> > > > "D&M" > wrote in message
> > > > ...
> > > > > Just curious if anyone has ever had a problem with high
> > alkalinity? My
> > > > > tester only reads up to 240ppm, and it's way past that, which
> > accounts
> > > > for
> > > > > my high pH, but besides high pH, has anyone ever had any other
> > > > problems?
> > > > > I've heard of problems with plants and some fish, most was
> > directed
> > > > toward
> > > > > the pH levels involved, but that was about it.
> > > > >
> > > > > Cheers
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Vincent Femia
July 14th 03, 11:10 PM
The declorinator as I call it is actually "pH 7.0 Seachem Neutral
Regulator".

"Racf" > wrote in message
...
> Stan here, using my original handle again.
>
> If the tap water filter is a Deionizer (DI) then you should
> re-constitute the water maybe a little. If it just a carbon filter then
> sure it removes metals and chlorine, but the salts and most minerals go
> right through it. Electrolytes are key to fresh water fish. They are in
> water unless great pain is taken to remove them, like RO/DI.
>
> Tap water should be OK.
>
> Of course there are always exceptions for weird fish, but they are
> exceptions. New fish from the store will need some extra protection and
> special acclimation to your tank. The key is the TDS/conductivity of
> the source and target water. Get a conductivity meter or a TDS meter
> (which is really the same thing in the range us humans could afford).
> Do not worry about the pH unless your gonna inject CO2 and all that
> baloney.
>
> Products you need:
>
> Amquel
> NovaAqua
> PolyAqua
>
> There are all Kordon products. Sure there are many others on the
> market, but they were first and some believe the best. You will use the
> Amquel the most followed by the other two when dealing with transferring
> fish. The Poly is the most extreme fish care. It puts a slime coat on
> a fish like nothing else you will ever see.
>
> I imagine your declorinator will be OK, but its probably not
> Amquel.....and it takes care of Chlorine, chloramine, and free ammonia.
>
> Anyway, acclimate new fish via the drip method. Slowly match up the TDS
> readings between the source water (fish bag) to your tank. Slow slow
> slow. No more than a TDS change of 50 per 1/2 hour......
>
> Of course you want to make sure the fish you buy are not already jacked.
> Since you have a reef tank I guess you probably into this stuff pretty
> much except fresh water varies big time, while salt water really is salt
> water....
>
> Again, do not worry about the pH....although once in a blue moon you may
> want to peek.
>
> PS. Take your TDS meter to the fish store and measure the tank your
> fish is coming out of. They many times add something to the bagged
> water like a bag buddy or a squirt of something else.
>
> You can phase out the Nova after your tank is running a while and fish
> are in good shape.
>
>
>
> --
>
> -------------------------------------
> For email remove junk
> leaving the IP Addrress
> Thats all from Racf
> -------------------------------------
> "Vincent Femia" > wrote in message
> et...
> > Stan,
> > Thanks for that info. Actually I probably should create a new thread
> for
> > this. So I apologize in advance. I use a product by Aquarium Pharm.
> called
> > tap water filter. It claims to remove chlorine and other metals from
> the
> > water. I use this water on my FOWLR (fish only with live rock) salt
> tank.
> > So far I have no complaints with it. I recently setup a 29 gallon
> freshwater
> > tank and it is becoming a planted tank. So I ask my LFS if I would
> need to
> > add anything to the water, since with the sal****er tank I add the sea
> salt
> > mix. He said that I would need to replace the electrolytes in the
> fresh
> > water since I was removing some of the trace elements as well as bad
> stuff
> > in the water. I don't recall the product he recommended but do you
> believe
> > that he is trying to sell me something else or is there merit in his
> > recommendation? At this point I still use tap water and treat it with
> a
> > dechlorinator. I've been too lazy to actually use the "filtered"
> water. What
> > do you think?
> >
> > Thanks,
> > Vinny
> >
> > "Stan" > wrote in message
> > ...
> > > Yes....sometimes. For Apistos just straight RO. For breeding
> Angels
> > > just straight RO. For Angel grow-out, I gradually adapt them back
> to my
> > > tap water...very hard and pH of 8.2. Growing Discus: I mix in
> Calcium
> > > Sulfate, Sea Salt, and Epsom salts and sometimes a bit of baking
> soda.
> > > If I were breeding them, it would be straight RO.
> > >
> > > The Apisto and Angel breeder tanks stay around a TDS of 40 - 80. I
> > > change 1/2 my water every week. I dose some plant supplements that
> add
> > > some minerals.
> > >
> > >
> > > "Vincent Femia" > wrote in message
> > > t...
> > > > Stan,
> > > > Do you use any additives to the RO water?
> > > > Thanks
> > > > Vinny
> > > >
> > > > "Stan" > wrote in message
> > > > ...
> > > > > I have. I bought an RO unit so I could manage my environments
> > > better.
> > > > > Since getting into RO and after buying a conductivity meter I
> focus
> > > a
> > > > > lot less on pH and a lot more on the conductivity.
> > > > >
> > > > > At sears in the water treatment department, they sell a Hanna
> TDS
> > > meter
> > > > > for about $20. Its says TDS, but really its conductivity. That
> > > meter
> > > > > will be a good investment.
> > > > >
> > > > > For a while I bought RO water from the grocery store for a 20
> gallon
> > > > > long Apisto tank. I paid about $180 for a 80 gallon per day RO
> > > unit.
> > > > > It produces about 60 gpd at my city waters temp. For me, it was
> a
> > > great
> > > > > thing, but I have a basement with plenty of room for all the
> gear
> > > and
> > > > > storage containers.
> > > > >
> > > > > Once you understand your water conditions you can decide if it
> meets
> > > > > your needs or if you need to alter your choice of fish types.
> > > > >
> > > > >
> > > > >
> > > > > "D&M" > wrote in message
> > > > > ...
> > > > > > Just curious if anyone has ever had a problem with high
> > > alkalinity? My
> > > > > > tester only reads up to 240ppm, and it's way past that, which
> > > accounts
> > > > > for
> > > > > > my high pH, but besides high pH, has anyone ever had any other
> > > > > problems?
> > > > > > I've heard of problems with plants and some fish, most was
> > > directed
> > > > > toward
> > > > > > the pH levels involved, but that was about it.
> > > > > >
> > > > > > Cheers
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Racf
July 15th 03, 12:48 AM
"Vincent Femia" > wrote in message
et...
> Will do. Can you post some links to data about how to use the TDS "
total
> dissolved solids " data. Sounds very interesting.


Here is a real juicy article I found doing a www.google.com search for:

osmotic shock

then by:

fish gills

This should be required reading:
Re: Muriatic Acid

------------------------------------------------------------------------
--------

a.. To: killietalk at aka_org
b.. Subject: Re: Muriatic Acid
c.. From: gunnar asblom <agakilli at algonet_se>
d.. Date: Mon, 31 Jan 2000 21:56:33 -0800
e.. References: <007001bf6aa4$ba801440$f504f8d1 at ldd_net>
<38938DF2.878E9A0D at home_com>

------------------------------------------------------------------------
--------

Wright Huntley wrote:
>
> Richard & Carol Dippold wrote:
> >
> > I have seen muriatic acid used to lower pH of water.
> > Sold in LFS it was a lot more expensive than the muriatic acid in
> > the hardware store. If I get the hardware store brand do I have to
do
> > anything to it before use? What are the disadvantage of using it
over
> > other pH lowering chemicals?
>
> As George says, HCl is extremely corrosive and very dangerous to use
around
> water.
>
> Why do you want to tinker with pH, anyway? It's *much* less important
than
> the stores claim.
>
> The fish can't feel/taste it. Honest!
>
> If you don't change water enough, and don't have good enough plant
growth,
> the fish-waste ammonium *can* turn to toxic ammonia at higher pH,
burning
> your fish's gills and skin. Do your water changes faithfully, and that
is
> simply no problem.
>
> >
> > Jungle makes a pH stabilizer or buffer to maintain the pH at 6.5.
> > If you water has a high pH (7.9) with a lot of buffers in it dose
adding
> > more buffers from this product help keep the pH down? If it dose
than
> > are the buffers for high pH and low pH must different ???
>
> The combination just creates a chemical soup that is bound to be worse
for
> your fish than simple clean water, changed frequently. Some are pure
algae
> fertilizers, BTW.
>
> The stores like to propagate the pH mythology, as they can teach
morons how
> to test for it and can sell you expensive kits that are easy to use.
Then
> they sell buffers. All are a waste of time and money, IMHO, and
usually do
> more harm than good.
>
> Then, when the chemicals cause an algae bloom, they can sell you
algaecide
> products or deadly fish that suck your other fishes scales at night
(Chinese
> Algae Eaters) and create even more repeat business!
>
> The most important water parameter, IMHO, is total dissolved solids
(tds).
> Except for the eggs of a few rain forest fish, the exact solids seem
to be
> fairly unimportant. In those rare cases, the amount of Calcium (GH)
*may*
> have some effect on hatching ability (the jury's still out on that).
> Otherwise tds is closely related to osmotic pressure. That's a thing
that
> allows fish with "salty" blood to live in fresh water. If you shock a
fish
> by dumping from hard, high tds, water into very soft, low tds, water,
the
> fresh water pours across the membranes and can explode cells in gills
and
> skin. It takes a fish up to hours to adjust the three-level regulation
> system to keep cell fluids in balance. Going the other way abruptly
can
> dehydrate cells, but tends to be a bit less fatal. That's why we often
have
> to drip acclimate new fish over a period of a few hours.
>
> Hard (high tds) water tends to have a higher pH, because CaCO3 and
MgCO3
> (and their bicarbonates) are common buffers for the higher pH. Soft
water
> (low tds) is often below 7 in pH because dissolved atmospheric CO2
drives
> the pH down and buffers are absent. Dumping the fish from the former
water
> to the latter almost always kills it, even with temp. (and even pH)
exactly
> matched. The easy-to-measure thing was the pH difference, so the
mythology
> of "pH shock" persists.
>
> I routinely subject fish to huge pH shifts, as much as two full
points, and
> can observe no effects whatsoever. Scheel, in his Atlas, said he did
as much
> as three points with the same result.
>
> The point of all this is to recognize what is important to your fish
and
> ignore the lfs mythology.
>
> On the very rare occasions when I wish to recreate black-water or
> rain-forest conditions for a new wild fish, I'll first soften the
water by
> adding lots of RO or equivalent, then use peat and/or oak leaves to
provide
> gentle humic acids to overcome any residual buffering and drop the pH
to a
> desired level. Peat alone does not work on hard tap water in most
areas, for
> you must lower buffering by dilution, first.
>
> By the second or third generation, most of our killies adapt pretty
well to
> our US tap water, which tends to be hard, high tds, and high pH (by
EPA
> mandate) in most of the country. Those unfortunate enough to live in
> soft-water areas can overcome the worst problems by adding a little
rock or
> kosher salt to their tanks to gently raise the tds. That reduces
> dramatically the osmotic stress across gill-cell membranes.
>
> Cells usually contain fluids with a tds about like sea water. Ocean
fish
> need nearly no osmotic regulatory system. As the water gets lower in
tds
> (fresher), the osmotic pressure gets higher and the fish has to work
harder
> to keep outside water from flooding and diluting body fluids. Pure
> distilled, DI (deionized) or RO (Reverse Osmosis) water are the
toughest of
> all on the fish. Tempering those with some tap water or salt is
usually a
> good idea, and the fish will suffer far less stress.
>
> If you use chemical buffers or acid, you should buy a $50 tds meter,
and
> carefully adjust the chemistry of your new change water, every time,
so it
> does not shock the fish. If you don't, they will not breed and will
always
> be subject to every disease and parasite that comes along. Then the
lfs can
> sell you some *more* "cures."
>
> All of these admonitions apply equally well to eggs, for they may have
> *less* ability to maintain fluid properties in changing tds water than
fish,
> with their complex 3-level osmotic-barrier system.
>
> Use your tap water as is, and partially change it frequently. That way
you
> minimize stresses on your fish at each change and maximize your
ability to
> keep and breed them.
>
> Wright
>
> --
> Wright Huntley, Fremont CA, USA, 510 494-8679 huntleyone at home dot
com
>
> "DEMOCRACY" is two wolves and a lamb voting on lunch.
> "LIBERTY" is a well-armed lamb denying enforcement of the vote.
> *** http://www.self-gov.org/index.html ***
> ---------------
> See http://www.aka.org/AKA/subkillietalk.html to unsubscribe
Someones may remember my qestions about karbonates,as most of us knew
there is a relationship betwen Ph and karbonates.It means then we lower
the carbonats we lower the Ph.I running my tanks with wery low carbonats
wich will give me low Ph,unfortionaly the Ph can go to low but it is not
a quick process so if we are observant at our tanks we can take
nessesary
precausions like add CACO3.How to see thath Ph is too low?We can messure
with a Phmeter or paper,but other things also happens as duckweed goes
white and snails climed up of the tank.My water is a exelent breeding
water and fryes comes in the tanks eggproduction is wery high diapterons
is not more diffcult to breed than striatum.Plants growt is wery good
(high CO2)The plants growt so good so I nearly dont have to change
water,I remove javamoss instead.Ph is betwen 5-6 but the fishes can take
down to 4,5 and some down to 4.A help to runn low Ph is to use seasalt
to keep the osmotic pressure upp have 1000-2000 microsiemens in my
tanks.My
feeling is thath it is nessesary or make it easier than we want to breed
many killies to keep the carbonates low.In such water as I have the
fungus doesent appear wich makes the eggstoring much easier.For the ones
ho knew German measuring system I have betwen 0,5-1 in german karbonat
degres.
Hope you can read my bad English.
Gunnar Aasblom.
---------------
See http://www.aka.org/AKA/subkillietalk.html to unsubscribe

------------------------------------------------------------------------
--------
References:
a.. Muriatic Acid
a.. From: "Richard & Carol Dippold" <dipdel5 at ldd_net>
b.. Re: Muriatic Acid
a.. From: Wright Huntley <huntley1 at home_com>



>
> "Racf" > wrote in message
> ...
> >
> > "Vincent Femia" > wrote in message
> > et...
> > > The declorinator as I call it is actually "pH 7.0 Seachem Neutral
> > > Regulator".
> >
> > Sounds like you could do without it....and use Amquel.
> >
> > >
> > > "Racf" > wrote in
> > message
> > > ...
> > > > Stan here, using my original handle again.
> > > >
> > > > If the tap water filter is a Deionizer (DI) then you should
> > > > re-constitute the water maybe a little. If it just a carbon
filter
> > then
> > > > sure it removes metals and chlorine, but the salts and most
minerals
> > go
> > > > right through it. Electrolytes are key to fresh water fish.
They
> > are in
> > > > water unless great pain is taken to remove them, like RO/DI.
> > > >
> > > > Tap water should be OK.
> > > >
> > > > Of course there are always exceptions for weird fish, but they
are
> > > > exceptions. New fish from the store will need some extra
protection
> > and
> > > > special acclimation to your tank. The key is the
TDS/conductivity
> > of
> > > > the source and target water. Get a conductivity meter or a TDS
> > meter
> > > > (which is really the same thing in the range us humans could
> > afford).
> > > > Do not worry about the pH unless your gonna inject CO2 and all
that
> > > > baloney.
> > > >
> > > > Products you need:
> > > >
> > > > Amquel
> > > > NovaAqua
> > > > PolyAqua
> > > >
> > > > There are all Kordon products. Sure there are many others on
the
> > > > market, but they were first and some believe the best. You will
use
> > the
> > > > Amquel the most followed by the other two when dealing with
> > transferring
> > > > fish. The Poly is the most extreme fish care. It puts a slime
coat
> > on
> > > > a fish like nothing else you will ever see.
> > > >
> > > > I imagine your declorinator will be OK, but its probably not
> > > > Amquel.....and it takes care of Chlorine, chloramine, and free
> > ammonia.
> > > >
> > > > Anyway, acclimate new fish via the drip method. Slowly match up
the
> > TDS
> > > > readings between the source water (fish bag) to your tank. Slow
> > slow
> > > > slow. No more than a TDS change of 50 per 1/2 hour......
> > > >
> > > > Of course you want to make sure the fish you buy are not already
> > jacked.
> > > > Since you have a reef tank I guess you probably into this stuff
> > pretty
> > > > much except fresh water varies big time, while salt water really
is
> > salt
> > > > water....
> > > >
> > > > Again, do not worry about the pH....although once in a blue moon
you
> > may
> > > > want to peek.
> > > >
> > > > PS. Take your TDS meter to the fish store and measure the tank
your
> > > > fish is coming out of. They many times add something to the
bagged
> > > > water like a bag buddy or a squirt of something else.
> > > >
> > > > You can phase out the Nova after your tank is running a while
and
> > fish
> > > > are in good shape.
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > -------------------------------------
> > > > For email remove junk
> > > > leaving the IP Addrress
> > > > Thats all from Racf
> > > > -------------------------------------
> > > > "Vincent Femia" > wrote in message
> > > > et...
> > > > > Stan,
> > > > > Thanks for that info. Actually I probably should create a new
> > thread
> > > > for
> > > > > this. So I apologize in advance. I use a product by Aquarium
> > Pharm.
> > > > called
> > > > > tap water filter. It claims to remove chlorine and other
metals
> > from
> > > > the
> > > > > water. I use this water on my FOWLR (fish only with live rock)
> > salt
> > > > tank.
> > > > > So far I have no complaints with it. I recently setup a 29
gallon
> > > > freshwater
> > > > > tank and it is becoming a planted tank. So I ask my LFS if I
would
> > > > need to
> > > > > add anything to the water, since with the sal****er tank I add
the
> > sea
> > > > salt
> > > > > mix. He said that I would need to replace the electrolytes in
the
> > > > fresh
> > > > > water since I was removing some of the trace elements as well
as
> > bad
> > > > stuff
> > > > > in the water. I don't recall the product he recommended but do
you
> > > > believe
> > > > > that he is trying to sell me something else or is there merit
in
> > his
> > > > > recommendation? At this point I still use tap water and treat
it
> > with
> > > > a
> > > > > dechlorinator. I've been too lazy to actually use the
"filtered"
> > > > water. What
> > > > > do you think?
> > > > >
> > > > > Thanks,
> > > > > Vinny
> > > > >
> > > > > "Stan" > wrote in message
> > > > > ...
> > > > > > Yes....sometimes. For Apistos just straight RO. For
breeding
> > > > Angels
> > > > > > just straight RO. For Angel grow-out, I gradually adapt
them
> > back
> > > > to my
> > > > > > tap water...very hard and pH of 8.2. Growing Discus: I mix
in
> > > > Calcium
> > > > > > Sulfate, Sea Salt, and Epsom salts and sometimes a bit of
baking
> > > > soda.
> > > > > > If I were breeding them, it would be straight RO.
> > > > > >
> > > > > > The Apisto and Angel breeder tanks stay around a TDS of 40 -
80.
> > I
> > > > > > change 1/2 my water every week. I dose some plant
supplements
> > that
> > > > add
> > > > > > some minerals.
> > > > > >
> > > > > >
> > > > > > "Vincent Femia" > wrote in message
> > > > > > t...
> > > > > > > Stan,
> > > > > > > Do you use any additives to the RO water?
> > > > > > > Thanks
> > > > > > > Vinny
> > > > > > >
> > > > > > > "Stan" > wrote in message
> > > > > > > ...
> > > > > > > > I have. I bought an RO unit so I could manage my
> > environments
> > > > > > better.
> > > > > > > > Since getting into RO and after buying a conductivity
meter
> > I
> > > > focus
> > > > > > a
> > > > > > > > lot less on pH and a lot more on the conductivity.
> > > > > > > >
> > > > > > > > At sears in the water treatment department, they sell a
> > Hanna
> > > > TDS
> > > > > > meter
> > > > > > > > for about $20. Its says TDS, but really its
conductivity.
> > That
> > > > > > meter
> > > > > > > > will be a good investment.
> > > > > > > >
> > > > > > > > For a while I bought RO water from the grocery store for
a
> > 20
> > > > gallon
> > > > > > > > long Apisto tank. I paid about $180 for a 80 gallon per
day
> > RO
> > > > > > unit.
> > > > > > > > It produces about 60 gpd at my city waters temp. For
me, it
> > was
> > > > a
> > > > > > great
> > > > > > > > thing, but I have a basement with plenty of room for all
the
> > > > gear
> > > > > > and
> > > > > > > > storage containers.
> > > > > > > >
> > > > > > > > Once you understand your water conditions you can decide
if
> > it
> > > > meets
> > > > > > > > your needs or if you need to alter your choice of fish
> > types.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > "D&M" > wrote in message
> > > > > > > > ...
> > > > > > > > > Just curious if anyone has ever had a problem with
high
> > > > > > alkalinity? My
> > > > > > > > > tester only reads up to 240ppm, and it's way past
that,
> > which
> > > > > > accounts
> > > > > > > > for
> > > > > > > > > my high pH, but besides high pH, has anyone ever had
any
> > other
> > > > > > > > problems?
> > > > > > > > > I've heard of problems with plants and some fish, most
was
> > > > > > directed
> > > > > > > > toward
> > > > > > > > > the pH levels involved, but that was about it.
> > > > > > > > >
> > > > > > > > > Cheers
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>