Pondmeister
June 4th 07, 02:48 PM
On Sun, 3 Jun 2007 19:48:54 CST, ~ jan > wrote:
<<>>>Garee wrote:
<<>>>It's not like there's a "build your own pond filter" website, with specs,
<<>>>part numbers and order info.
<<>>>
<<>>>I went through similar issues last year building the smaller filter, and not
<<>>>once was adding a bulkhead even mentioned.
<<>>
<<>>Actually, if you'd looked at mine, which is always at the bottom of my sig.
<<>>I show the filter, the parts, where purchased, cost (at the time), and part
<<>>numbers. Granted some of the info is old, but it will still get you there.
<<>>Bulkheads are part of the list.
<<>>
<<>>Unfortunately it is somewhat different than what you are building. I'm
<<>>sorry, I assumed (oops) that you'd seen my website at one time or another.
<<>>
<<>>I should know better. Especially after yesterday when a lady stopped by the
<<>>booth I was manning asking about pond builder/fixers who actually showed up
<<>>to work. Turned out after talking with her for a bit, she had a leak and
<<>>hadn't even tried the method of turning off the water fall to see if it was
<<>>there. She was already to rip it out, order a new liner, and hire someone
<<>>to do. She'd already had someone out who didn't measurements and didn't get
<<>>back to her.... and he didn't even make sure that's where the problem was.
<<>>
<<>>Click on Demon Pond Filter to see picture and the parts list. Click on "My
<<>>Filter" to see it in ground. ~ jan
<<>>------------
<<>>Zone 7a, SE Washington State
<<>>Ponds: www.jjspond.us
And she even admits she ought to know better yet she does this same
crap over and over.Dumbass, then again what do yu expect for a
moderator in the ponds group and a bona fide member of the **** CArol
Gulley Hate group created by and run by Gill PAssman all for the sake
of gaining a moderated pond group..!
-------
I forgot more about ponds and koi than I'll ever know!
<<>>>Garee wrote:
<<>>>It's not like there's a "build your own pond filter" website, with specs,
<<>>>part numbers and order info.
<<>>>
<<>>>I went through similar issues last year building the smaller filter, and not
<<>>>once was adding a bulkhead even mentioned.
<<>>
<<>>Actually, if you'd looked at mine, which is always at the bottom of my sig.
<<>>I show the filter, the parts, where purchased, cost (at the time), and part
<<>>numbers. Granted some of the info is old, but it will still get you there.
<<>>Bulkheads are part of the list.
<<>>
<<>>Unfortunately it is somewhat different than what you are building. I'm
<<>>sorry, I assumed (oops) that you'd seen my website at one time or another.
<<>>
<<>>I should know better. Especially after yesterday when a lady stopped by the
<<>>booth I was manning asking about pond builder/fixers who actually showed up
<<>>to work. Turned out after talking with her for a bit, she had a leak and
<<>>hadn't even tried the method of turning off the water fall to see if it was
<<>>there. She was already to rip it out, order a new liner, and hire someone
<<>>to do. She'd already had someone out who didn't measurements and didn't get
<<>>back to her.... and he didn't even make sure that's where the problem was.
<<>>
<<>>Click on Demon Pond Filter to see picture and the parts list. Click on "My
<<>>Filter" to see it in ground. ~ jan
<<>>------------
<<>>Zone 7a, SE Washington State
<<>>Ponds: www.jjspond.us
And she even admits she ought to know better yet she does this same
crap over and over.Dumbass, then again what do yu expect for a
moderator in the ponds group and a bona fide member of the **** CArol
Gulley Hate group created by and run by Gill PAssman all for the sake
of gaining a moderated pond group..!
-------
I forgot more about ponds and koi than I'll ever know!