|
|
floor protection
Does anyone have any suggestions or experience in placing "something" under
a tank stand to help protect hard wood floors? I have a 75 gallon with the standard wood stand with cabinets. I am thinking of putting something, but I don't know what yet, between the stand and the floor, just to help protect the wood finish. I know it's virtually impossible not to have occasional water spills when doing maintenance, etc., which is why I'm thinking about putting something down first. But I'm not sure it's a good idea though (stand integrity?). Any thoughts? Thanks, Patrick |
floor protection
Thanks Wayne,
What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick "Wayne Sallee" wrote in message ... Anything you put down would hide water from your sight while it does it's damage. How about giving the whole floor an extra protective coating before installing the aquarium, and making sure you have access under the stand to clean up any salt. It's the salt that does more damage than the water. And then be careful not to do anything that encourages salt creep. And take quick action when you do see salt creep. Wayne Sallee Patrick wrote on 1/9/2008 9:06 PM: Does anyone have any suggestions or experience in placing "something" under a tank stand to help protect hard wood floors? I have a 75 gallon with the standard wood stand with cabinets. I am thinking of putting something, but I don't know what yet, between the stand and the floor, just to help protect the wood finish. I know it's virtually impossible not to have occasional water spills when doing maintenance, etc., which is why I'm thinking about putting something down first. But I'm not sure it's a good idea though (stand integrity?). Any thoughts? Thanks, Patrick |
floor protection
"Patrick" wrote in message news:4Jghj.5261$sH.4241@trnddc04... Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick "Wayne Sallee" wrote in message ... Anything you put down would hide water from your sight while it does it's damage. How about giving the whole floor an extra protective coating before installing the aquarium, and making sure you have access under the stand to clean up any salt. It's the salt that does more damage than the water. And then be careful not to do anything that encourages salt creep. And take quick action when you do see salt creep. Wayne Sallee Patrick wrote on 1/9/2008 9:06 PM: Does anyone have any suggestions or experience in placing "something" under a tank stand to help protect hard wood floors? I have a 75 gallon with the standard wood stand with cabinets. I am thinking of putting something, but I don't know what yet, between the stand and the floor, just to help protect the wood finish. I know it's virtually impossible not to have occasional water spills when doing maintenance, etc., which is why I'm thinking about putting something down first. But I'm not sure it's a good idea though (stand integrity?). Any thoughts? Thanks, Patrick That's a good one. I was thinking a pan like a water heater pan but that wouldn't be very practical and impossible to purchase. It would hide damage too like Wayne said. Probably a rubber mat in front of the aquarium. I'm glad my house is almost all tile but only for that reason. Otherwise, I like solid wood floors. Tile is too hard. jim |
floor protection
Yeah, I'm still worried about the integrity of the stand if it sits on anything but the floor. I'll give it some extra coats of protection and just be even more careful than usual. Thanks everyone. Patrick That's a good one. I was thinking a pan like a water heater pan but that wouldn't be very practical and impossible to purchase. It would hide damage too like Wayne said. Probably a rubber mat in front of the aquarium. I'm glad my house is almost all tile but only for that reason. Otherwise, I like solid wood floors. Tile is too hard. jim "jthread" wrote in message ... "Patrick" wrote in message news:4Jghj.5261$sH.4241@trnddc04... Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick |
floor protection get the body condom dude......your a bigprick anyhow!
On Jan 10, 8:48*am, "Patrick" wrote:
Yeah, I'm still worried about the integrity of the stand if it sits on anything but the floor. I'll give it some extra coats of protection and just be even more careful than usual. Thanks everyone. Patrick That's a good one. I was thinking a pan like a water heater pan but that wouldn't be very practical and impossible to purchase. It would hide damage too like Wayne said. Probably a rubber mat in front of the aquarium. I'm glad my house is almost all tile but only for that reason. Otherwise, I like solid wood floors. Tile is too hard. jim "jthread" wrote in message ... "Patrick" wrote in message news:4Jghj.5261$sH.4241@trnddc04... Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick- Hide quoted text - - Show quoted text - Just get down like the dog that you really are and lap it up dude! Floor protection, just get a big freaking condom, just like the one you pull over yur head when you do KurtG |
floor protection
You could put any of those items under the stand
without causing any harm to the stank or aquarium, but how are they going to protect the floor. If your stand is designed or modified so that you can see under it, then you can rest assured that there is no damage being done, and if water spills, you can get under the stand to wipe it up. Then the only thing to worry about is where the stand touches the floor. For that if there is some kind of sealer that would be safe for the floor (after an extra protective coating is applied to the whole floor), that could be put on the bottom of the stand where it comes in contact with the floor, to seal up the space in between the wood and the floor to keep water from seeping in between the wood and the floor. I bet bees wax would work well for that. Wayne Sallee Patrick wrote on 1/9/2008 10:57 PM: Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick "Wayne Sallee" wrote in message ... Anything you put down would hide water from your sight while it does it's damage. How about giving the whole floor an extra protective coating before installing the aquarium, and making sure you have access under the stand to clean up any salt. It's the salt that does more damage than the water. And then be careful not to do anything that encourages salt creep. And take quick action when you do see salt creep. Wayne Sallee Patrick wrote on 1/9/2008 9:06 PM: Does anyone have any suggestions or experience in placing "something" under a tank stand to help protect hard wood floors? I have a 75 gallon with the standard wood stand with cabinets. I am thinking of putting something, but I don't know what yet, between the stand and the floor, just to help protect the wood finish. I know it's virtually impossible not to have occasional water spills when doing maintenance, etc., which is why I'm thinking about putting something down first. But I'm not sure it's a good idea though (stand integrity?). Any thoughts? Thanks, Patrick |
floor protection get the body condom dude......your a bigprick anyhow!
On Jan 10, 9:10*am, "Big Habeeb (a.k.a. Mitch)"
wrote: On Jan 10, 8:48*am, "Patrick" wrote: Yeah, I'm still worried about the integrity of the stand if it sits on anything but the floor. I'll give it some extra coats of protection and just be even more careful than usual. Thanks everyone. Patrick That's a good one. I was thinking a pan like a water heater pan but that wouldn't be very practical and impossible to purchase. It would hide damage too like Wayne said. Probably a rubber mat in front of the aquarium. I'm glad my house is almost all tile but only for that reason. |
floor protection
Bees wax is what I figured I'd use after a more protective coating is
applied. As you said anything I put there will really just hide any potential damage causing incident. The stand is one of those cabinet type stands (no legs, just solid wood all around), and there really is no way to get under the stand as the stand is in contact with the floor on all four sides. I guess I could always get a different stand, as the tank will be completely broken down and moved (along with me & everything else in the house) approximately a half hours drive from where it is now. Thanks Patrick "Wayne Sallee" wrote in message ... You could put any of those items under the stand without causing any harm to the stank or aquarium, but how are they going to protect the floor. If your stand is designed or modified so that you can see under it, then you can rest assured that there is no damage being done, and if water spills, you can get under the stand to wipe it up. Then the only thing to worry about is where the stand touches the floor. For that if there is some kind of sealer that would be safe for the floor (after an extra protective coating is applied to the whole floor), that could be put on the bottom of the stand where it comes in contact with the floor, to seal up the space in between the wood and the floor to keep water from seeping in between the wood and the floor. I bet bees wax would work well for that. Wayne Sallee Patrick wrote on 1/9/2008 10:57 PM: Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick "Wayne Sallee" wrote in message ... Anything you put down would hide water from your sight while it does it's damage. How about giving the whole floor an extra protective coating before installing the aquarium, and making sure you have access under the stand to clean up any salt. It's the salt that does more damage than the water. And then be careful not to do anything that encourages salt creep. And take quick action when you do see salt creep. Wayne Sallee Patrick wrote on 1/9/2008 9:06 PM: Does anyone have any suggestions or experience in placing "something" under a tank stand to help protect hard wood floors? I have a 75 gallon with the standard wood stand with cabinets. I am thinking of putting something, but I don't know what yet, between the stand and the floor, just to help protect the wood finish. I know it's virtually impossible not to have occasional water spills when doing maintenance, etc., which is why I'm thinking about putting something down first. But I'm not sure it's a good idea though (stand integrity?). Any thoughts? Thanks, Patrick |
floor protection get the body condom dude......your a bigprick anyhow!
On Jan 10, 1:21*pm, "Big Habeeb (a.k.a. Mitch)"
wrote: On Jan 10, 9:10*am, "Big Habeeb (a.k.a. Mitch)" wrote: On Jan 10, 8:48*am, "Patrick" wrote: Yeah, I'm still worried about the integrity of the stand if it sits on anything but the floor. I'll give it some extra coats of protection and just be even more careful than usual. Thanks everyone. Patrick That's a good one. I was thinking a pan like a water heater pan but that wouldn't be very practical and impossible to purchase. It would hide damage too like Wayne said. Probably a rubber mat in front of the aquarium. I'm glad my house is almost all tile but only for that reason. Otherwise, I like solid wood floors. Tile is too hard. jim "jthread" wrote in message ... "Patrick" wrote in message news:4Jghj.5261$sH.4241@trnddc04... Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick- Hide quoted text - - Show quoted text - Just get down like the dog that you really are and lap it up dude! Floor protection, just get a big freaking condom, just like the one you pull over yur head when *you do KurtG- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text - |
floor protection
Or you could modify the stand.
Wayne Sallee Patrick wrote on 1/10/2008 4:35 PM: Bees wax is what I figured I'd use after a more protective coating is applied. As you said anything I put there will really just hide any potential damage causing incident. The stand is one of those cabinet type stands (no legs, just solid wood all around), and there really is no way to get under the stand as the stand is in contact with the floor on all four sides. I guess I could always get a different stand, as the tank will be completely broken down and moved (along with me & everything else in the house) approximately a half hours drive from where it is now. Thanks Patrick "Wayne Sallee" wrote in message ... You could put any of those items under the stand without causing any harm to the stank or aquarium, but how are they going to protect the floor. If your stand is designed or modified so that you can see under it, then you can rest assured that there is no damage being done, and if water spills, you can get under the stand to wipe it up. Then the only thing to worry about is where the stand touches the floor. For that if there is some kind of sealer that would be safe for the floor (after an extra protective coating is applied to the whole floor), that could be put on the bottom of the stand where it comes in contact with the floor, to seal up the space in between the wood and the floor to keep water from seeping in between the wood and the floor. I bet bees wax would work well for that. Wayne Sallee Patrick wrote on 1/9/2008 10:57 PM: Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick "Wayne Sallee" wrote in message ... Anything you put down would hide water from your sight while it does it's damage. How about giving the whole floor an extra protective coating before installing the aquarium, and making sure you have access under the stand to clean up any salt. It's the salt that does more damage than the water. And then be careful not to do anything that encourages salt creep. And take quick action when you do see salt creep. Wayne Sallee Patrick wrote on 1/9/2008 9:06 PM: Does anyone have any suggestions or experience in placing "something" under a tank stand to help protect hard wood floors? I have a 75 gallon with the standard wood stand with cabinets. I am thinking of putting something, but I don't know what yet, between the stand and the floor, just to help protect the wood finish. I know it's virtually impossible not to have occasional water spills when doing maintenance, etc., which is why I'm thinking about putting something down first. But I'm not sure it's a good idea though (stand integrity?). Any thoughts? Thanks, Patrick |
floor protection get the body condom dude......your a bigprick anyhow!
On Jan 10, 9:10*am, "Big Habeeb (a.k.a. Mitch)"
wrote: On Jan 10, 8:48*am, "Patrick" wrote: Yeah, I'm still worried about the integrity of the stand if it sits on anything but the floor. I'll give it some extra coats of protection and just be even more careful than usual. Thanks everyone. Patrick That's a good one. I was thinking a pan like a water heater pan but that wouldn't be very practical and impossible to purchase. It would hide damage too like Wayne said. Probably a rubber mat in front of the aquarium. I'm glad my house is almost all tile but only for that reason. |
floor protection
"Patrick" wrote in
news:bcwhj.6061$hS.2733@trnddc08: Bees wax is what I figured I'd use after a more protective coating is applied. As you said anything I put there will really just hide any potential damage causing incident. The stand is one of those cabinet type stands (no legs, just solid wood all around), and there really is no way to get under the stand as the stand is in contact with the floor on all four sides. I guess I could always get a different stand, as the tank will be completely broken down and moved (along with me & everything else in the house) approximately a half hours drive from where it is now. Thanks Patrick You really don't want to put anything between the tank and the floor. What I'd say you want to do is isolate whatever water hits the floor from the wooden structure of the tank stand. When you find the right place for the tank, run a wide bead of silicone caulk against it and the floor, and run the bead both a half-inch up onto the wood of the stand (more of a flat ribbon of caulk at that point, than it is a caulk bead), and a half-inch over the floor itself, to form a caulk 'dam' a half-inch high. Do the same thing on the inside of the stand frame, if the stand has an open-bottom interior. Then, just like a caulked tub, for 5 or 10 bucks, your stand will be isolated from the water, no wicking under the frame, and the floor can still be easily cleaned/mopped up. Silicone caulks can be peeled off of finished wood with a minimal amount of residue to clean up, if you ever had to move the tank. Just keep an eye out for if the tank gets bumped, as the caulk bead could crack. Its a cheap/easy patch repair if you catch sight of a crack. DaveZ Atom Weaver |
floor protection
Water can still get under the stand, as the floor of
the wood stand will let water through. Another thing that could be done is to put a thin layer of silicone on the bottom of the stand, and let it cure, then place the sand on the floor, and the silicone rubber will be pressed tightly against the floor helping to seal back water. But the fact that water will get through the stand floor/shelf, still needs be realized. Thus modifying the stand so that one can clean up under the stand would be desirable. Wayne Sallee atomweaver wrote on 1/11/2008 1:15 PM: "Patrick" wrote in news:bcwhj.6061$hS.2733@trnddc08: Bees wax is what I figured I'd use after a more protective coating is applied. As you said anything I put there will really just hide any potential damage causing incident. The stand is one of those cabinet type stands (no legs, just solid wood all around), and there really is no way to get under the stand as the stand is in contact with the floor on all four sides. I guess I could always get a different stand, as the tank will be completely broken down and moved (along with me & everything else in the house) approximately a half hours drive from where it is now. Thanks Patrick You really don't want to put anything between the tank and the floor. What I'd say you want to do is isolate whatever water hits the floor from the wooden structure of the tank stand. When you find the right place for the tank, run a wide bead of silicone caulk against it and the floor, and run the bead both a half-inch up onto the wood of the stand (more of a flat ribbon of caulk at that point, than it is a caulk bead), and a half-inch over the floor itself, to form a caulk 'dam' a half-inch high. Do the same thing on the inside of the stand frame, if the stand has an open-bottom interior. Then, just like a caulked tub, for 5 or 10 bucks, your stand will be isolated from the water, no wicking under the frame, and the floor can still be easily cleaned/mopped up. Silicone caulks can be peeled off of finished wood with a minimal amount of residue to clean up, if you ever had to move the tank. Just keep an eye out for if the tank gets bumped, as the caulk bead could crack. Its a cheap/easy patch repair if you catch sight of a crack. DaveZ Atom Weaver |
floor protection
Dave,
Thank you for this suggestion. I really like the idea, and would never have thought about doing this. The stand does have a "floor" under the cabinet, so unless I do what Wayne suggested and modify it, maybe by removing the stand "floor", I would only be able to seal the outside part of the stand, but I think that would still give me a better measure of protection the wood floor. Thanks Patrick atomweaver" wrote in message ... You really don't want to put anything between the tank and the floor. What I'd say you want to do is isolate whatever water hits the floor from the wooden structure of the tank stand. When you find the right place for the tank, run a wide bead of silicone caulk against it and the floor, and run the bead both a half-inch up onto the wood of the stand (more of a flat ribbon of caulk at that point, than it is a caulk bead), and a half-inch over the floor itself, to form a caulk 'dam' a half-inch high. Do the same thing on the inside of the stand frame, if the stand has an open-bottom interior. Then, just like a caulked tub, for 5 or 10 bucks, your stand will be isolated from the water, no wicking under the frame, and the floor can still be easily cleaned/mopped up. Silicone caulks can be peeled off of finished wood with a minimal amount of residue to clean up, if you ever had to move the tank. Just keep an eye out for if the tank gets bumped, as the caulk bead could crack. Its a cheap/easy patch repair if you catch sight of a crack. DaveZ Atom Weaver |
floor protection
Patrick wrote:
Does anyone have any suggestions or experience in placing "something" under a tank stand to help protect hard wood floors? How about this. Build a catch basin the same size as the inside of your cabinet. What it's made of isn't as important as the fact that it's waterproof and can hold at least 5 gallons of water. Place that on legs about 1" high. The rest of the stand should be built around this. If I were building a stand, this would form part of the bottom. The 1" gap will prevent any water from seeping in between the bottom of the basin and the floor. Assuming it's the same size as the stand, it's larger than the tank, and should be able to catch anything serious. George Patterson Worry doesn't improve the future; it just ruins the present. |
floor protection
|
floor protection
I would not remove the stand floor if it's high
enough above the house floor. If the bottom of the stand looks like 4 2x4's on their side, and the stand floor on top of that, then you could modify the front 2x4 by cutting out an arch, so that you have full access to under the stand. Wayne Sallee Patrick wrote on 1/11/2008 8:13 PM: Dave, Thank you for this suggestion. I really like the idea, and would never have thought about doing this. The stand does have a "floor" under the cabinet, so unless I do what Wayne suggested and modify it, maybe by removing the stand "floor", I would only be able to seal the outside part of the stand, but I think that would still give me a better measure of protection the wood floor. Thanks Patrick atomweaver" wrote in message ... You really don't want to put anything between the tank and the floor. What I'd say you want to do is isolate whatever water hits the floor from the wooden structure of the tank stand. When you find the right place for the tank, run a wide bead of silicone caulk against it and the floor, and run the bead both a half-inch up onto the wood of the stand (more of a flat ribbon of caulk at that point, than it is a caulk bead), and a half-inch over the floor itself, to form a caulk 'dam' a half-inch high. Do the same thing on the inside of the stand frame, if the stand has an open-bottom interior. Then, just like a caulked tub, for 5 or 10 bucks, your stand will be isolated from the water, no wicking under the frame, and the floor can still be easily cleaned/mopped up. Silicone caulks can be peeled off of finished wood with a minimal amount of residue to clean up, if you ever had to move the tank. Just keep an eye out for if the tank gets bumped, as the caulk bead could crack. Its a cheap/easy patch repair if you catch sight of a crack. DaveZ Atom Weaver |
COCK sucking 101 by the aquaria crew in marine reefs!
On Jan 10, 5:36*pm, "Big Habeeb (a.k.a. Mitch)"
wrote: On Jan 10, 1:21*pm, "Big Habeeb (a.k.a. Mitch)" wrote: On Jan 10, 9:10*am, "Big Habeeb (a.k.a. Mitch)" wrote: On Jan 10, 8:48*am, "Patrick" wrote: Yeah, I'm still worried about the integrity of the stand if it sits on anything but the floor. I'll give it some extra coats of protection and just be even more careful than usual. Thanks everyone. Patrick That's a good one. I was thinking a pan like a water heater pan but that wouldn't be very practical and impossible to purchase. It would hide damage too like Wayne said. Probably a rubber mat in front of the aquarium. I'm glad my house is almost all tile but only for that reason. Otherwise, I like solid wood floors. Tile is too hard. jim "jthread" wrote in message ... "Patrick" wrote in message news:4Jghj.5261$sH.4241@trnddc04... Thanks Wayne, What you said about hiding any damage is one of the things I'm worried about. I kept thinking of maybe a cork type tile extending beyond the stand dimensions - but then over time the tank will it sink into the cork - probably not a good thing. Then I thought of a piece of Plexiglas, but then I picture the Plexiglas cracking, also probably not a good thing. I'm always on top of any salt, and water spills, I think I may just be paranoid about the floors, they've just been refinished. The extra protective coating may be the best idea. Thanks, Patrick- Hide quoted text - - Show quoted text - Just get down like the dog that you really are and lap it up dude! Floor protection, just get a big freaking condom, just like the one you pull over yur head when *you do KurtG- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text - |
floor protection
"Wayne Sallee" wrote in message ... I would not remove the stand floor if it's high enough above the house floor. If the bottom of the stand looks like 4 2x4's on their side, and the stand floor on top of that, then you could modify the front 2x4 by cutting out an arch, so that you have full access to under the stand. Wayne Sallee Patrick wrote on 1/11/2008 8:13 PM: Dave, Thank you for this suggestion. I really like the idea, and would never have thought about doing this. The stand does have a "floor" under the cabinet, so unless I do what Wayne suggested and modify it, maybe by removing the stand "floor", I would only be able to seal the outside part of the stand, but I think that would still give me a better measure of protection the wood floor. Thanks Patrick atomweaver" wrote in message ... You really don't want to put anything between the tank and the floor. What I'd say you want to do is isolate whatever water hits the floor from the wooden structure of the tank stand. When you find the right place for the tank, run a wide bead of silicone caulk against it and the floor, and run the bead both a half-inch up onto the wood of the stand (more of a flat ribbon of caulk at that point, than it is a caulk bead), and a half-inch over the floor itself, to form a caulk 'dam' a half-inch high. Do the same thing on the inside of the stand frame, if the stand has an open-bottom interior. Then, just like a caulked tub, for 5 or 10 bucks, your stand will be isolated from the water, no wicking under the frame, and the floor can still be easily cleaned/mopped up. Silicone caulks can be peeled off of finished wood with a minimal amount of residue to clean up, if you ever had to move the tank. Just keep an eye out for if the tank gets bumped, as the caulk bead could crack. Its a cheap/easy patch repair if you catch sight of a crack. DaveZ Atom Weaver put in a tiled area under the tank and extending out a bit. there is no 100% way to prevent water damage to a wooden floor otherwise. |
floor protection
That would require damaging the wood floor in that area.
Wayne Sallee charlie wrote on 1/14/2008 12:20 PM: put in a tiled area under the tank and extending out a bit. there is no 100% way to prevent water damage to a wooden floor otherwise. |
floor protection
I appreciate all the input and ideas, thanks. I think I'm going to modify
the stand a bit and try to be extra careful (for what good that will really do). I really don't want to get into modifying the floor. Thanks everyone Patrick "Wayne Sallee" wrote in message ... That would require damaging the wood floor in that area. Wayne Sallee charlie wrote on 1/14/2008 12:20 PM: put in a tiled area under the tank and extending out a bit. there is no 100% way to prevent water damage to a wooden floor otherwise. |
floor protection
Patrick wrote:
charlie wrote on 1/14/2008 12:20 PM: put in a tiled area under the tank and extending out a bit. there is no 100% way to prevent water damage to a wooden floor otherwise. Why not put the stand in an acrylic tray or similar? |
floor protection
"Wayne Sallee" wrote in message ... That would require damaging the wood floor in that area. Wayne Sallee charlie wrote on 1/14/2008 12:20 PM: put in a tiled area under the tank and extending out a bit. there is no 100% way to prevent water damage to a wooden floor otherwise. i meant replace the wooden floor with tile. the floor installer should do this when the floor is built. if you already have the floor when you want to install the tank, have a floor installer come in and remove the wooden floor in that spot. that would be the best looking and most safe option. |
floor protection
charlie wrote on 1/15/2008 9:42 AM: "Wayne Sallee" wrote in message ... That would require damaging the wood floor in that area. Wayne Sallee charlie wrote on 1/14/2008 12:20 PM: put in a tiled area under the tank and extending out a bit. there is no 100% way to prevent water damage to a wooden floor otherwise. i meant replace the wooden floor with tile. the floor installer should do this when the floor is built. if you already have the floor when you want to install the tank, have a floor installer come in and remove the wooden floor in that spot. that would be the best looking and most safe option. That would require damaging the wood floor in that area. Wayne Sallee |
floor protection
That would be ideal - the section of the floor that the tank stands on being
tile instead of the wood, but it's cost prohibitive as far as I'm concerned. And then it ruins the floor, which is more important than the tank. Thanks though Patrick "charlie" wrote in message ... "Wayne Sallee" wrote in message ... That would require damaging the wood floor in that area. Wayne Sallee charlie wrote on 1/14/2008 12:20 PM: put in a tiled area under the tank and extending out a bit. there is no 100% way to prevent water damage to a wooden floor otherwise. i meant replace the wooden floor with tile. the floor installer should do this when the floor is built. if you already have the floor when you want to install the tank, have a floor installer come in and remove the wooden floor in that spot. that would be the best looking and most safe option. |
| All times are GMT +1. The time now is 06:05 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
FishKeepingBanter.com