That square thing in bumper
What is the purpose of that small (2-inch square) indent in the rear
bumpers of BMWs? It's the border that is indented (the interior of the square being flush with the bumper surface)and it looks like it could be punched out. |
There should be one in the front bumper too.
It's where you screw in the eyelet from the toolbox for pulling the car if it gets stuck. > wrote in message oups.com... > What is the purpose of that small (2-inch square) indent in the rear > bumpers of BMWs? It's the border that is indented (the interior of the > square being flush with the bumper surface)and it looks like it could > be punched out. > |
You can pop that cover out and there is a "Screw" hole behind it. In the lid
of your truck you should have a Tow hook that looks like a "Eye-let" that you can screw in there. or in short.... its the tow point of your car. -Branden > wrote in message oups.com... > What is the purpose of that small (2-inch square) indent in the rear > bumpers of BMWs? It's the border that is indented (the interior of the > square being flush with the bumper surface)and it looks like it could > be punched out. > |
"Branden Nelsen" > wrote in message ... > You can pop that cover out and there is a "Screw" hole behind it. In the > lid of your truck you should have a Tow hook that looks like a "Eye-let" > that you can screw in there. > > or in short.... its the tow point of your car. there is a similar set up on the side of the car for the jack isnt there? |
In article >,
joe_tide > wrote: > There should be one in the front bumper too. > It's where you screw in the eyelet from the toolbox for pulling the car > if it gets stuck. Strange it's at the back? I'd always thought it was for lashing the car down on ships, etc. Doesn't look terribly substantial for towing with. -- *Dancing is a perpendicular expression of a horizontal desire * Dave Plowman London SW To e-mail, change noise into sound. |
Dave Plowman (News) wrote:
>In article >, > joe_tide > wrote: > > >>There should be one in the front bumper too. >> >> >>It's where you screw in the eyelet from the toolbox for pulling the car >>if it gets stuck. >> >> > >Strange it's at the back? > > > There's one at each end. >I'd always thought it was for lashing the car down on ships, etc. Doesn't >look terribly substantial for towing with. > > > The owner's manual specifically says it's for towing, with some limitations. JRE |
Both ends Dave.
I don't think it's actually for towing. More like if you do something stupid and end up somewhere where you can't get out. If someone has a winch, truck, etc., they can latch on to that and yank you out of your prediciment. Gently of course. ;-) "Dave Plowman (News)" > wrote in message ... > In article >, > joe_tide > wrote: >> There should be one in the front bumper too. > >> It's where you screw in the eyelet from the toolbox for pulling the car >> if it gets stuck. > > Strange it's at the back? > > I'd always thought it was for lashing the car down on ships, etc. Doesn't > look terribly substantial for towing with. > > -- > *Dancing is a perpendicular expression of a horizontal desire * > > Dave Plowman London SW > To e-mail, change noise into sound. |
On Tue, 19 Jul 2005 20:41:07 -0400, JRE > wrote:
>>>It's where you screw in the eyelet from the toolbox for pulling the car >>>if it gets stuck. >The owner's manual specifically says it's for towing, with some limitations. Limitations. Ha! Reminds me of about 10 years ago when a maniac friend of mine had bought a true, jacked up, professionally done and insanely powerful 'monster' truck from a distressed owner "just for the hell of it." My ancient and far more modest Chevy C10 had been snowed in up to the windows for several days, and all the snow had pretty much turned to ice. Lou attached chains to the rear of his monster and to the front axle of my truck. He took the strain on the chains and then skillfully gunned it. I came out of the packed ice like a cork out of a bottle. No damage. Except for mild whiplash. -- Dan. |
There is a tool in the trunk that is used by the tow truck to pull the car
onto a flat-bed, or out of a snow bank. The tool screws into a hole that is behind a cover that is about 2 inches square. Use a screwdriver (also in the tool kit) to pop the cover off, and screw the loop into the newly exposed hole. > wrote in message oups.com... > What is the purpose of that small (2-inch square) indent in the rear > bumpers of BMWs? It's the border that is indented (the interior of the > square being flush with the bumper surface)and it looks like it could > be punched out. > |
It's not for towing, per se. It's used to hook the cable to to drag the car
onto a flat bed tow truck. "Dave Plowman (News)" > wrote in message ... > In article >, > joe_tide > wrote: >> There should be one in the front bumper too. > >> It's where you screw in the eyelet from the toolbox for pulling the car >> if it gets stuck. > > Strange it's at the back? > > I'd always thought it was for lashing the car down on ships, etc. Doesn't > look terribly substantial for towing with. > > -- > *Dancing is a perpendicular expression of a horizontal desire * > > Dave Plowman London SW > To e-mail, change noise into sound. |
All times are GMT +1. The time now is 08:38 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com