![]() |
Water Parameters
Hi everybody,''I new to ponding in fact I just filled mine up with water
yesterday. I still have to finish around the edges, but maybe by the weekend. Today I', going to get a test kit. Could someone post what water paramenters I should shoot for. I know that ammonia and nitrite should be 0, but what about the ph , kh , salt level and anything else I'm missing. What is an acceptable level for Nitrate? Thanks Kevin |
Water Parameters
Don't worry too much about the pH. If the KH is around 100 or higher, then
the pH will be rock solid in a range acceptable to the pond fish. Salt level is one of those things that some want salt, others don't, and there is no convincing the other side. The salt level for treating sick fish is 0.3%, but for most plants, a level higher than about 0.1% can be hard on them. Nitrates are a low level irritant that if the numbers get high can cause problems with fish health. The recommended maximum is 25ppm, though I have never been able to get that low. -- RichToyBox http://www.geocities.com/richtoybox/pondintro.html "KRF" wrote in message ... Hi everybody,''I new to ponding in fact I just filled mine up with water yesterday. I still have to finish around the edges, but maybe by the weekend. Today I', going to get a test kit. Could someone post what water paramenters I should shoot for. I know that ammonia and nitrite should be 0, but what about the ph , kh , salt level and anything else I'm missing. What is an acceptable level for Nitrate? Thanks Kevin |
Water Parameters
Don't worry too much about the pH. If the KH is around 100 or higher, then
the pH will be rock solid in a range acceptable to the pond fish. Salt level is one of those things that some want salt, others don't, and there is no convincing the other side. The salt level for treating sick fish is 0.3%, but for most plants, a level higher than about 0.1% can be hard on them. Nitrates are a low level irritant that if the numbers get high can cause problems with fish health. The recommended maximum is 25ppm, though I have never been able to get that low. -- RichToyBox http://www.geocities.com/richtoybox/pondintro.html "KRF" wrote in message ... Hi everybody,''I new to ponding in fact I just filled mine up with water yesterday. I still have to finish around the edges, but maybe by the weekend. Today I', going to get a test kit. Could someone post what water paramenters I should shoot for. I know that ammonia and nitrite should be 0, but what about the ph , kh , salt level and anything else I'm missing. What is an acceptable level for Nitrate? Thanks Kevin |
Water Parameters
I don't know.... I think it's possible to have too high a pH, with rock
solid KH, so I'd still have a pH test kit on hand. Otherwise, ammonia, nitrite & nitrate are the important tests, but in a planted pond, and frequent partial water changes, nitrate shouldn't be a problem, but that's not to say, the test isn't worth by-passing. ~ jan See my ponds and filter design: http://users.owt.com/jjspond/ ~Keep 'em Wet!~ Tri-Cities WA Zone 7a To e-mail see website On Thu, 08 Apr 2004 23:35:06 GMT, "RichToyBox" wrote: Don't worry too much about the pH. If the KH is around 100 or higher, then the pH will be rock solid in a range acceptable to the pond fish. Salt level is one of those things that some want salt, others don't, and there is no convincing the other side. The salt level for treating sick fish is 0.3%, but for most plants, a level higher than about 0.1% can be hard on them. Nitrates are a low level irritant that if the numbers get high can cause problems with fish health. The recommended maximum is 25ppm, though I have never been able to get that low. |
Water Parameters
I don't know.... I think it's possible to have too high a pH, with rock
solid KH, so I'd still have a pH test kit on hand. Otherwise, ammonia, nitrite & nitrate are the important tests, but in a planted pond, and frequent partial water changes, nitrate shouldn't be a problem, but that's not to say, the test isn't worth by-passing. ~ jan See my ponds and filter design: http://users.owt.com/jjspond/ ~Keep 'em Wet!~ Tri-Cities WA Zone 7a To e-mail see website On Thu, 08 Apr 2004 23:35:06 GMT, "RichToyBox" wrote: Don't worry too much about the pH. If the KH is around 100 or higher, then the pH will be rock solid in a range acceptable to the pond fish. Salt level is one of those things that some want salt, others don't, and there is no convincing the other side. The salt level for treating sick fish is 0.3%, but for most plants, a level higher than about 0.1% can be hard on them. Nitrates are a low level irritant that if the numbers get high can cause problems with fish health. The recommended maximum is 25ppm, though I have never been able to get that low. |
All times are GMT +1. The time now is 05:42 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
FishKeepingBanter.com