![]() |
Looking for Comments from Experience
The SO approved me renting a trencher so I can run power and water out to
the pond. When I mentioned I could T off and put a spigot in the garden, she instantly approved the rental. Before I do this...Any thoughts? gotchas? wish-I-had-done-this's? BV. |
Looking for Comments from Experience
Benign Vanilla wrote:
The SO approved me renting a trencher so I can run power and water out to the pond. When I mentioned I could T off and put a spigot in the garden, she instantly approved the rental. Before I do this...Any thoughts? gotchas? wish-I-had-done-this's? BV. at least 3' deep for a water line or have a "hydrant" type pipe at other end so it can be drained in winter. -- -- http://www.kencofish.com Ken Arnold, 401-831-5739 cell 401-225-0556 Importer/Exporter of Goldfish,Koi,rare Predators Shipping to legal states/countries only! Permalon liners, Oase & Supreme Pondmaster pumps Linux (SuSE 8.2) user #329121 Please Note: No trees or animals were harmed in the sending of this contaminant free message We do concede that a signicant number of electrons may have been inconvenienced ;) |
Looking for Comments from Experience
"KenCo" wrote in message ... Benign Vanilla wrote: The SO approved me renting a trencher so I can run power and water out to the pond. When I mentioned I could T off and put a spigot in the garden, she instantly approved the rental. Before I do this...Any thoughts? gotchas? wish-I-had-done-this's? BV. at least 3' deep for a water line or have a "hydrant" type pipe at other end so it can be drained in winter. My plan to is have an inside valve that can shut it down for the winter, and then I plan to open all of the outside valves to allow for expansion. BV. |
Looking for Comments from Experience
Benign Vanilla wrote:
at least 3' deep for a water line or have a "hydrant" type pipe at other end so it can be drained in winter. My plan to is have an inside valve that can shut it down for the winter, and then I plan to open all of the outside valves to allow for expansion. BV. you don't just have to open the outside valve to allow for expansion, you also have to be able to drain the line. TOTALLY. make sure the valve has an auxilary drain valve. or add a cheap hose connection valve between the outside and the inside valves. Also maintain a consistant pitch back down into the basement. --If grits ain't groceries, Then Mona Lisa was a man.... -- ya'll put sum bacon drippin's in those grits....ya hear me?? |
Looking for Comments from Experience
"chagoi" wrote in message
... Benign Vanilla wrote: at least 3' deep for a water line or have a "hydrant" type pipe at other end so it can be drained in winter. My plan to is have an inside valve that can shut it down for the winter, and then I plan to open all of the outside valves to allow for expansion. BV. you don't just have to open the outside valve to allow for expansion, you also have to be able to drain the line. TOTALLY. make sure the valve has an auxilary drain valve. or add a cheap hose connection valve between the outside and the inside valves. Also maintain a consistant pitch back down into the basement. There is no way I'll be able to pitch back to the basement. In the backyard it's a walkout, and for the distance I am going, the end of the pipe would end up under the house. LOL. BV. |
Looking for Comments from Experience
Just blow it out with an air compressor. Much safer.
Joe On 5/26/04 9:02 AM, "Benign Vanilla" wrote: My plan to is have an inside valve that can shut it down for the winter, and then I plan to open all of the outside valves to allow for expansion. -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Looking for Comments from Experience
You could wrap the pipe with heat tape from below the frost line up since
you said you'd have electric out there too. They do this on most mobile homes and it works well. If you are neat and keep things covered with some sort of enclosure it should work well. Blowing the water out with an air compressor before winter sets in is also an option. But in my opinion would be a PITA. Oh and whatever you do, use properly installed GFI circuits!!!! -- Pond Diver "Benign Vanilla" wrote in message ... "KenCo" wrote in message ... Benign Vanilla wrote: The SO approved me renting a trencher so I can run power and water out to the pond. When I mentioned I could T off and put a spigot in the garden, she instantly approved the rental. Before I do this...Any thoughts? gotchas? wish-I-had-done-this's? BV. at least 3' deep for a water line or have a "hydrant" type pipe at other end so it can be drained in winter. My plan to is have an inside valve that can shut it down for the winter, and then I plan to open all of the outside valves to allow for expansion. BV. |
Looking for Comments from Experience
Benign Vanilla wrote:
ent. There is no way I'll be able to pitch back to the basement. In the backyard it's a walkout, and for the distance I am going, the end of the pipe would end up under the house. LOL. BV. How far do you have to run it. you don't need a lot of pitch just try to not have low spots for the water to pool, esp. if you need to stay ABOVE the frost line. My city water line comes into the house 5 feet below ground level. My line to the pond goes out of the house @4' runs 80 feet to 3.5' below the ground at the pond. At a pitch of 6-8" per 100'. More than enough to drain properly. Blowing it out with a compressor is a ROYAL PITA Chagoi -- I refuse to tip-toe through life, only to arrive safely at death's door |
Looking for Comments from Experience
"Benign Vanilla" wrote in message
... The SO approved me renting a trencher so I can run power and water out to the pond. When I mentioned I could T off and put a spigot in the garden, she instantly approved the rental. Before I do this...Any thoughts? gotchas? wish-I-had-done-this's? Probably stating the obvious but, check for buried pipes before starting. My garden is a spiders web of wires and pipes under the surface so I can only dig carefully by hand. |
Looking for Comments from Experience
Not that bad, you just put a fitting on one end that accepts the compressor
hose and turn it on. Joe On 5/26/04 9:46 AM, "chagoi" wrote: Blowing it out with a compressor is a ROYAL PITA -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
All times are GMT +1. The time now is 02:18 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
FishKeepingBanter.com