FishKeepingBanter.com

FishKeepingBanter.com (http://www.fishkeepingbanter.com/index.php)
-   General (http://www.fishkeepingbanter.com/forumdisplay.php?f=16)
-   -   new pond (http://www.fishkeepingbanter.com/showthread.php?t=21635)

[email protected] July 20th 05 09:36 PM

new pond
 
hey all, was wondering what the best way to start a bacteria colony in
our new 4000G pond (also, when can we would be the soonest we could
start introducing koi?). we installed a fluid art ultimate system with
vortex, uv, bead filtration.. we actually live nearby a rather large
lake and wonder if that would be a good place to collect some bacteria
to introduce into our pond? if people prefer off the shelf bacteria,
which products?

thanks


~ janj JJsPond.us July 20th 05 11:24 PM

On 20 Jul 2005 13:36:58 -0700, wrote:

hey all, was wondering what the best way to start a bacteria colony in
our new 4000G pond (also, when can we would be the soonest we could
start introducing koi?). we installed a fluid art ultimate system with
vortex, uv, bead filtration.. we actually live nearby a rather large
lake and wonder if that would be a good place to collect some bacteria
to introduce into our pond? if people prefer off the shelf bacteria,
which products?

thanks


Bacteria from a lake would be okay, if you could be sure you weren't
getting any of the nasties that might also be in the lake.

MicrobeLift makes a special product just for bead filters. Bacteria will
come on its own. As far as starting koi, please read this:
http://tinyurl.com/55kv6 . Do NOT put goldfish in, if you want this to be a
koi only pond.

Are you planning to have any plants? If so, get as many as you can and get
them growing well and consider only putting in small koi, so they are
raised with the plants, as plants not salad. ~ jan


See my ponds and filter design:
www.jjspond.us

~Keep 'em Wet!~
Tri-Cities WA Zone 7a
To e-mail see website

George July 21st 05 01:44 AM


wrote in message
oups.com...
hey all, was wondering what the best way to start a bacteria colony in
our new 4000G pond (also, when can we would be the soonest we could
start introducing koi?). we installed a fluid art ultimate system with
vortex, uv, bead filtration.. we actually live nearby a rather large
lake and wonder if that would be a good place to collect some bacteria
to introduce into our pond? if people prefer off the shelf bacteria,
which products?

thanks


I would shy away from introducing bacteria into your pond from a lake
simply because you don't know what bacteria you are introducing. You could
also introduce parasites. I use aquazyme, which works very well for me.
You should wait at least 21 days for the nitrogen cycle to run to
completion before introducing critters to your pond.



~ janj JJsPond.us July 21st 05 02:51 AM

On Thu, 21 Jul 2005 00:44:40 GMT, " George" wrote:

I would shy away from introducing bacteria into your pond from a lake
simply because you don't know what bacteria you are introducing. You could
also introduce parasites. I use aquazyme, which works very well for me.
You should wait at least 21 days for the nitrogen cycle to run to
completion before introducing critters to your pond.

The nitrogen cycle changes with each additional critter. Takes much longer
without them for it to cycle, is my understanding. ~ jan

~Power to the Porg, Flow On!~

[email protected] July 21st 05 04:50 AM

even with the UV sterializer you wouldn't trust lake enzymes?


Derek Boughton July 21st 05 12:31 PM

wrote:
hey all, was wondering what the best way to start a bacteria colony in
our new 4000G pond (also, when can we would be the soonest we could
start introducing koi?). we installed a fluid art ultimate system with
vortex, uv, bead filtration.. we actually live nearby a rather large
lake and wonder if that would be a good place to collect some bacteria
to introduce into our pond? if people prefer off the shelf bacteria,
which products?

thanks


Hippo dung. You get Carol and her pet Baboon to crap in your pond. That
should do it

----------------------------------------------------------------------------------------------------------

CR...

George July 21st 05 12:42 PM


"~ janj JJsPond.us" wrote in message
...
On Thu, 21 Jul 2005 00:44:40 GMT, " George"
wrote:


I would shy away from introducing bacteria into your pond from a lake
simply because you don't know what bacteria you are introducing. You
could
also introduce parasites. I use aquazyme, which works very well for me.
You should wait at least 21 days for the nitrogen cycle to run to
completion before introducing critters to your pond.

The nitrogen cycle changes with each additional critter. Takes much
longer
without them for it to cycle, is my understanding. ~ jan

~Power to the Porg, Flow On!~


Not really. Once the nitrifying bacteria have been established (which takes
on the average, about three weeks to a month, the pond should be able to
digest nutrients up to the carrying capacity of the system. Only when you
overstock the pond should there be a problem with ammonia or nitrites
building up. The reason not to include your fish before the nitrifying
bacteria have become established is because of the nature of the nitrogen
cycle. In a new pond, normally, you would seed it with nutrients which the
bacteria can digest. After about three days, you will begin to see ammonia
in the water. After a week to ten days, the ammonia levels will peak (and
is the time at which any introduced fish would normally start to show
ammonia poisoning). After this period, the ammonia levels will begin to
drop, indicating the the ammonia-reducing bacteria are taking hold. From
about 1 week to 10 days onward, the nitrite levels will begin to rise as
the ammonia levels drop until about 14-16 days. At which time the nitrite
levels will be at their peak (adding fish at this time can lead to their
untimely death). After this, the nitrite levels will drop, and the nitrate
levels will start to rise as the nitrite-reducing bacteria become
established. Once all nitrite levels have disappeared, then you should
only see a low level of nitrate in the water, no nitrite, and no ammonia,
indicating that the nitrite reducing bacteria have become established.
This usually occurs by day 21, but could take as long as 30 days. At this
point is it safe to slowly begin introducing your valuable fish stocks. Of
course, you don't want to introduce a large number of them all at once, or
it will overwhelm the microbes ability to digest the increased nutrients. I
hope this helps.



George July 21st 05 12:44 PM


wrote in message
ups.com...
even with the UV sterializer you wouldn't trust lake enzymes?


A uv filter will not rid the water of paracites, once they have found a
home in pond sediments or on your fish. It only kills them in their
free-flowing stage, but by then, they've already become established in your
pond.



George July 21st 05 09:49 PM


"Derek Boughton" wrote in message
...
wrote:
hey all, was wondering what the best way to start a bacteria colony in
our new 4000G pond (also, when can we would be the soonest we could
start introducing koi?). we installed a fluid art ultimate system with
vortex, uv, bead filtration.. we actually live nearby a rather large
lake and wonder if that would be a good place to collect some bacteria
to introduce into our pond? if people prefer off the shelf bacteria,
which products?

thanks


Hippo dung. You get Carol and her pet Baboon to crap in your pond. That
should do it

----------------------------------------------------------------------------------------------------------

CR...


PLONK!



~ janj JJsPond.us July 21st 05 11:53 PM

On Thu, 21 Jul 2005 20:49:28 GMT, " George" wrote:

"Derek Boughton" wrote in message

Hippo dung. You get Carol and her pet Baboon to crap in your pond. That
should do it


PLONK!

FYI, Derek Boughton didn't post that, you've just filtered a legit though
irregular ponding poster.... but than this thread was about filtration. ;)
~ jan


~Power to the Porg, Flow On!~


All times are GMT +1. The time now is 07:24 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
FishKeepingBanter.com