Protein Skimmer Question (Newbie)
 

Hi all! I just setup my sal****er tank March 31st. It is a 55 gal tank with
30 lbs of live rock and 40 lbs of live sand. Filtration for now is handled
by 1 Penguin 330 Power filter with bio wheel and 1 Whisper 60 Power filter.
The protein skimmer is a Jebo 180 Hang on Tank model. The skimmer is
shooting a lot of very small bubbles into the tank. Is this normal? Should I
wait for the skimmer to break in, so to speak? Anybody have any experience
with the Jebo? TIA.
Fernan

Protein Skimmer Question (Newbie)
 

That is very bad. It should not do that. I don't know how you can fix it
with your setup, but people with a refugium have the skimmer return the
water to a section of the refugium in which the water flows under a divider,
so no bubbles ever make it to the tank.

"F.D.S." wrote in message
...
Hi all! I just setup my sal****er tank March 31st. It is a 55 gal tank
with
30 lbs of live rock and 40 lbs of live sand. Filtration for now is handled
by 1 Penguin 330 Power filter with bio wheel and 1 Whisper 60 Power
filter.
The protein skimmer is a Jebo 180 Hang on Tank model. The skimmer is
shooting a lot of very small bubbles into the tank. Is this normal? Should
I
wait for the skimmer to break in, so to speak? Anybody have any experience
with the Jebo? TIA.
Fernan

Protein Skimmer Question (Newbie)
 

will this harm the tank inhabitants? tia.

"tech27" wrote in message
...
That is very bad. It should not do that. I don't know how you can fix it
with your setup, but people with a refugium have the skimmer return the
water to a section of the refugium in which the water flows under a
divider,
so no bubbles ever make it to the tank.

"F.D.S." wrote in message
...
Hi all! I just setup my sal****er tank March 31st. It is a 55 gal tank
with
30 lbs of live rock and 40 lbs of live sand. Filtration for now is
handled
by 1 Penguin 330 Power filter with bio wheel and 1 Whisper 60 Power
filter.
The protein skimmer is a Jebo 180 Hang on Tank model. The skimmer is
shooting a lot of very small bubbles into the tank. Is this normal?
Should
I
wait for the skimmer to break in, so to speak? Anybody have any
experience
with the Jebo? TIA.
Fernan

Protein Skimmer Question (Newbie)
 

"tech27" wrote in message
...
| That is very bad. It should not do that. I don't know how you can
fix it
| with your setup, but people with a refugium have the skimmer return
the
| water to a section of the refugium in which the water flows under a
divider,
| so no bubbles ever make it to the tank.
|

Disagree, at least with a brand new unit. My H O T skimmer did the
same thing, and I spoke with Customer service. The very nice lady
told me that this is normal in some cases. Adjust the skimmer as
needed, and don't touch it again. After a max of 2 weeks the bubbles
will go away, and the skimmer will skim. She was right. It's a Prizm
(yeah, shush, it's working quite wellg,) so I set it so the wet
foam was just below the tower hole. After 5 days of not mucking about
with it, the bubbles in the tank went away, it began producing dry
foam, and I get copious amounts of disgusting mattter to dump out.
The fish weren't bothered by the bubbles in slightest, best I could
tell, nor did they seem to mourn thier departure.
Worst case, contact Customer Service at Jebo via phone or email.
Dollars to DSB they'll tell you the same thing.

billy

Protein Skimmer Question (Newbie)
 

Disagree, at least with a brand new unit.

Good point, but I wasn't talking about the break-in or setup of skimmers,
only that bubbles are bad.

Protein Skimmer Question (Newbie)
 

"tech27" wrote in message
...
|
|
| Good point, but I wasn't talking about the break-in or setup of
skimmers,
| only that bubbles are bad.


Okay, fair nuff. In what way are the bubbles harmful? A couple ppl on
RC told me it shouldn't be a problem, wouldn't bother the fish.
Admittedly, at the time, the tank was nothing more than LR and a
couple chromis.

billy

Protein Skimmer Question (Newbie)
 

| only that bubbles are bad.

Okay, fair nuff. In what way are the bubbles harmful?

bubbles are NOT generally bad

there apearance is a different story as some like them others dont.

there are only a few things reefers put into there tanks that are harmed in any way by
bubbles. and then it takes a lot of bubbles. things to watch out for are deep water
inverts, thats just about it.


--
Richard Reynolds

Protein Skimmer Question (Newbie)
 

The two skimmers I have (Seaclone 100, and Via Aqua multiskimmer) both shot
tiny bubbles into the tank for the first couple days, then they quit doing
that. The seaclone will do it now only in certain circumstances, but since
it hasnt happened in a couple days now I dont recall what made it do it.
(but at the time I was kind of amazed and thought, oh, so doing this, makes
the skimmer put bubbles into the tank).

In any event, I think all hang on tank skimmers will do this during break in
period. Some people minimize it by adding a bit of foam to where the water
returns to the tank, but I dont know about how to do that with a Jebo 180.


"F.D.S." wrote in message
...
Hi all! I just setup my sal****er tank March 31st. It is a 55 gal tank
with
30 lbs of live rock and 40 lbs of live sand. Filtration for now is handled
by 1 Penguin 330 Power filter with bio wheel and 1 Whisper 60 Power
filter.
The protein skimmer is a Jebo 180 Hang on Tank model. The skimmer is
shooting a lot of very small bubbles into the tank. Is this normal? Should
I
wait for the skimmer to break in, so to speak? Anybody have any experience
with the Jebo? TIA.
Fernan

Protein Skimmer Question (Newbie)
 

Bubbles??? look here (n about 1/2 way down th epage)
http://www.asplashoflife.com/onyx_clowns.htm
Rod Buehler
www.asplashoflife.com

Protein Skimmer Question (Newbie)
 

If the seaclone shoots bubbles you adjust the air and water mix, maybe the
Jebo is the same?
"Rod" wrote in message
...
Bubbles??? look here (n about 1/2 way down th epage)
http://www.asplashoflife.com/onyx_clowns.htm
Rod Buehler
www.asplashoflife.com