Very simple sump system?
 

So I have a new 55 gallon freshwater planted tank and was thinking of
setting up a very simple sump sytem.

My goals are to:

Simplify water changes or water addition
Simplify dosing of chemicals or medications
Move unsightly heaters and air bubbles from main tank
Increase oxygenation by heavily aerating sump
Keep CO2 generation out of main tank


I drew a diagram for the idea I have - http://jonnythan.com/sump.gif

I was planning on drilling a small hole at the top of the tank and running a
tube down into the sump (10 gallon?) tank. Use my Eheim Ecco filter as a
pump to remove water from the sump and pump it into the main tank.

I was also planning on putting a Fluval internal filter into the main tank
for some additional mechanical filtration and to have something that's still
running during filter maintenance.

Anyone have any comments or suggestions on this setup? Thanks.

Jon

Very simple sump system?
 

"Jon C" wrote in message
...
So I have a new 55 gallon freshwater planted tank and was thinking of
setting up a very simple sump sytem.

My goals are to:

Simplify water changes or water addition
Simplify dosing of chemicals or medications
Move unsightly heaters and air bubbles from main tank
Increase oxygenation by heavily aerating sump
Keep CO2 generation out of main tank


I drew a diagram for the idea I have - http://jonnythan.com/sump.gif

I was planning on drilling a small hole at the top of the tank and running
a
tube down into the sump (10 gallon?) tank. Use my Eheim Ecco filter as a
pump to remove water from the sump and pump it into the main tank.

I was also planning on putting a Fluval internal filter into the main tank
for some additional mechanical filtration and to have something that's
still
running during filter maintenance.

Anyone have any comments or suggestions on this setup? Thanks.

Jon

My first thoughts:

Would the Eheim have enough lift to pump back into the tank? I was under the
impression canister filters relied more on syphonng power than pump power.
i.e. will only pump back to the highest level of the inlet hose of the
filter. Not up to another level as you seem to want to do. (Correct me if
I'm wrong)
If your design does work I would be happy as i had thought of doing
something similar but was put off by the need for an extra pump to return
water to the tank.

Regards,
Tony

Very simple sump system?
 

"Tony K" wrote in message
...

"Jon C" wrote in message
...
So I have a new 55 gallon freshwater planted tank and was thinking of
setting up a very simple sump sytem.

My goals are to:

Simplify water changes or water addition
Simplify dosing of chemicals or medications
Move unsightly heaters and air bubbles from main tank
Increase oxygenation by heavily aerating sump
Keep CO2 generation out of main tank


I drew a diagram for the idea I have - http://jonnythan.com/sump.gif

I was planning on drilling a small hole at the top of the tank and
running
a
tube down into the sump (10 gallon?) tank. Use my Eheim Ecco filter as
a
pump to remove water from the sump and pump it into the main tank.

I was also planning on putting a Fluval internal filter into the main
tank
for some additional mechanical filtration and to have something that's
still
running during filter maintenance.

Anyone have any comments or suggestions on this setup? Thanks.

Jon

My first thoughts:

Would the Eheim have enough lift to pump back into the tank? I was under
the
impression canister filters relied more on syphonng power than pump power.
i.e. will only pump back to the highest level of the inlet hose of the
filter. Not up to another level as you seem to want to do. (Correct me if
I'm wrong)
If your design does work I would be happy as i had thought of doing
something similar but was put off by the need for an extra pump to return
water to the tank.

Regards,
Tony

I didn't realize that. This makes things more complicated, doesn't it :)

How about this change: http://jonnythan.com/sump2.gif

Get rid of the canister filter. Buy some 4" PVC pipe and a pair of pipe
caps. Drill a lot of small holes in the bottom one and one big hole in the
top one. Attach a tee barb to the big top hole, and run a hose from that
hole to the pump. Fill up the pipe with bio media and filter pads. This
way I can just use a water pump designed for high head (like
http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=20 758)
to pump the water through the pipe filter back up into the tank.

This sound like a good idea?

Very simple sump system?
 

"Tony K" wrote in message
...


My first thoughts:

Would the Eheim have enough lift to pump back into the tank? I was under
the
impression canister filters relied more on syphonng power than pump power.


My Eheim 2026 is almost 4 feet below the water surface and the flow is
unchanged. The eheim canister filters *are* pumps, and I see no reason he
can't use one for this purpose.

Very simple sump system?
 

"Dinky" wrote in message
...

"Tony K" wrote in message
...


My first thoughts:

Would the Eheim have enough lift to pump back into the tank? I was under
the
impression canister filters relied more on syphonng power than pump
power.


My Eheim 2026 is almost 4 feet below the water surface and the flow is
unchanged. The eheim canister filters *are* pumps, and I see no reason he
can't use one for this purpose.

I think Tony is correct. In your case, the inlet is at the same level as
the output. Since you have a sealed system in the filter, you don't need
much power.

Try this experiment: Take the canister to the kitchen and put it on the
floor. Put a bowl of water on the floor next to it. Put the inlet into the
bowl, and put the output tube up in the sink.

What happens?

You've taken away all of the pressure in the inlet, thus forcing the pump
portion to have to create lots more force to move the water.

Very simple sump system?
 

"Jon C" wrote in message
...
Try this experiment: Take the canister to the kitchen and put it on the
floor. Put a bowl of water on the floor next to it. Put the inlet into
the
bowl, and put the output tube up in the sink.


Interesting. I have 2 canisters arriving this week...I think I'll try it:)

Very simple sump system?
 

"Jon C" wrote in message
...
"Tony K" wrote in message

I didn't realize that. This makes things more complicated, doesn't it :)

How about this change: http://jonnythan.com/sump2.gif

I'd suggest draining onto the filter/bio-media, than adding CO2 and pumping
back. That way, you take advantage of gravity for the filtering (rather than
loading the pump), and the sump is "clean", which means less muck in the
sump. BTW, why the air pump? If you need to, have a spray bar from the pump
return, but having an air pump is redundant, and certainly not desirable if
you are injecting CO2. From personal experience, with CO2 injection and good
lighting, the plants supersaturate the water with O2 anyway, so much so that
you get bubbling of O2 off the plants.

Cheers,
Poe