![]() |
Common pH testing mistakes
Problems maintaining aquarium pH can sometimes be attributed to
improper testing. The two most frequent mistakes my customers made were as follows: 1) Do not test water immediately after being drawn from the tap. For a true reading always let it sit for a day or two before testing. 2) Do not use your finger to stopper the test vial when shaking. Your skin's natural pH will affect the reading. Christopher Platt |
Common pH testing mistakes
|
Common pH testing mistakes
|
Common pH testing mistakes
Test
carlrs wrote: AustinMN wrote: wrote: Problems maintaining aquarium pH can sometimes be attributed to improper testing. The two most frequent mistakes my customers made were as follows: 1) Do not test water immediately after being drawn from the tap. For a true reading always let it sit for a day or two before testing. 2) Do not use your finger to stopper the test vial when shaking. Your skin's natural pH will affect the reading. And pH is only one aspect of water quality (not the most important, either). Be sure to also test hardness, ammonia, nitrites, and nitrates. Austin Great points, and do not forget KH too Carl |
Common pH testing mistakes
My customers got their water from either of two municipal water
supplies. One was slightly soft and acid, the other slightly hard and alkaline. But either was acceptable for the average community tank, assuming regular partial water changes were done. For customers requiring buffering I always recommended peat or dolomite in the filter. But some always insisted on the use of chemicals. In most aquariums ammonia (once past the initial "cycle"), nitrite and nitrate are easily controlled by frequent partial water changes. Simplify! -Chris- |
All times are GMT +1. The time now is 07:01 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
FishKeepingBanter.com