"T" wrote in message
ink.net...
"Iain Miller" wrote in message
...
"Harry Muscle" wrote in message
...
I'm gonna be buying a tank stand (for 55G) made out of particle board
covered in that fake wood looking veneer. There is also some
MDF
on
this stand (ie: in the back, etc.). I would like to protect this
stand
the
best I can, since I know that these materials aren't exactly water
friendly.
So I thought of urethaning the whole thing once it's put together.
Has
anyone ever tried something like this? Any other suggestions on how
to
protect such a stand from accidental water damage.
Can't see why you shouldn't - maybe test an unobtrusive part first.
Assuming the stand has a small virticle piece (maybe an inch or two)
alomg
the front another good tip is that once the tank is full apply a very
thin
bead of clear silicone between this and the tank - stops drips of water
running down the front of the tank getting in behind it/under the tank.
Use
masking tape if necessary to make it neat. If you do it right you won't
see
it.
I.
If your good at woodworking make one... Urethane is alright, but probably
not the best product... Have you tried to find something for marine
applications, such as the finishing products used on the yachts?? I use
urethane for my wood working projects ( fine furniture ). On particle
board
(MDF for the Americans) I can't see how well it would protect it, and may
have a tendency to swell the fibers more than you might expect.. Is the
area very noticable? Or is it out of sight?? You might want to sand the
edges even finer and consider using paint to cover the areas...
Tim..
I was hoping to protect not only the particle board and MDF (at the
back of the stand), but actually the entire stand, since that fake veneer
stuff doesn't stand up to water too well. I was thinking of maybe spraying
on an oil based clear coat (be it urethane, polyurethane, lacquer, varnish,
.... I really don't know what the difference is yet).
Thanks,
Harry
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----