Dale Henderson wrote:
I set up my 20gal (24"12"x16") aquarium and have been running it for a
week with no fish. Shortly after I set it up I tested the water and
found the ammoina level to be in the low detectable range .5-1ppm. And
it has stayed there for the past week. So my question is where did the
ammonia come from and what should I do to lower the ammonia? I
thought by now I'd have generated a bacteria culture and start seeing
the ammonia level go down.

You probably used a sodium thiosulfate based dechlorinator on water with
chloramines. All water conditioners split chloramines into chlorine and
ammonia, but many water conditioners only treat the chlorine half,
leaving about the level of ammonia you're seeing.

Find out for sure whether your tap water containes chlorine or
chloramine from your local water company. If it's chloramine, you will
need to use something like AmQuel to treat it. Look for a water
conditioner that states that it treats both chloramine AND ammonia.

--
Elaine T __
http://eethomp.com/fish.html '__
rec.aquaria.* FAQ http://faq.thekrib.com