View Single Post
  #9  
Old April 7th 04, 08:53 PM
Charles Spitzer
external usenet poster
 
Posts: n/a
Default Porcelain Tiles in a tank?


"Harry Muscle" wrote in message
...
"Charles Spitzer" charlie.spitzer@nospam. .com wrote in message
news:c51lec$677$1@transfer. .com...

"james" wrote in message
news:qlYcc.410$es.107@fed1read02...
In article c51hrb$5rf$1@transfer. .com,
Charles Spitzer charlie.spitzer@nospam. .com wrote:

neither the glaze nor the tile may be safe. there's a lot of glazes

that
aren't food safe (contain lead, cadmium, etc) and could leach metals

from
either a basic or acid solution in contact with it. you'd have to

find
out
what is in them from the manufacturer, and they probably don't know

since
tiles typically don't have a msds.

Anybody selling a kitchen tile laced with toxic heavy metals is just
asking for litigation...


not really. also, OP didn't state that they were kitchen tiles. could be
floor, bathroom, , etc. incidental contact with lead bearing glazes

for
kitchen tiles wouldn't be ither. the OP is talking about leaving

them
inside the tank, which is full contact forever.

they allow lead crystal to be used for decanters as long as you don't

store
wine in them. long term contact with lead crystal leaches out the lead

into
the wine. it's all a matter of how long the contact is.



But what if the tile doesn't have a glaze on it? What if it's solid
porcelain, with the color pattern embedded throughout the whole tile?

Thanks,
Harry


then it depends upon what is in the clay, which comes from the ground and
has LOTS of different metals in it, or could even be a blend of different
clays from different regions of the world. for sure, the tile manufacturer
won't know that, or at least, they won't tell. i've never seen an msds on
tile.