Thanks for the links

Although building my own filter system my be the more frugal approach
but I really am looking for an of the shelf system.


Thanks again

Jason


"~ jan JJsPond.us" wrote in message
...
Hi Jason,

Many folks here have websites showing their DYI's filter systems, if it is
getting cold where you are already I highly doubt you'll need a UV once
the
pond system get established.

Anyway... my website is below, click on *My Pond Filter* *The Demon Pond
Filter* and *My Lilypond* for under the liner connections.

See my ponds and filter design:
http://users.owt.com/jjspond/

~Keep 'em Wet!~
Tri-Cities WA Zone 7a
To e-mail see website

On Sun, 21 Sep 2003 21:31:13 +0100, "jason"
wrote:

Hi everyone.

I'm a newbie to pond life (excuse the pun) and have a few questions
to
ask, if you don't mind. ....................

A little back ground to myself and the pond I'm in the process of
constructing. I've been a water keeper for 15 years, firstly tropical
then
onto a marine reef system, which I've had for 3 years and is my little
baby!
So I'm no newbie to keeping fish as such.

I've recently started to construct a 9'x9'x4' ( approx 7000L / 2000G)
pond in my back garden, the hole is dug and the frame work is all but
complete. This I've made from 9"x4" Tanalised rough sawn planks, not seen
many "wood" ponds so I thought it would be novel, though a bugger to
construct !!!! Although I don't intend to stock this year (I'm up in
Derbyshire UK and it is getting a little cold) but my aim is to stock
with a
mixture of Kio, Orf's and a Sterlet or 2.

I've been doing some research on filter UVC and pump systems and also
asked around a few fish keeping friends for advice on equipment
selection,
but would value other input. The main to concerns are the filter and UVC,
I've narrowed it down to either the OASE Biosys Promax 30000 or the
pressurised Fishmate 6000UV. Budget is an issue so the Evolution Nexus
range, which I like the look of is out of the question. Has any one any
experience with these products or recommend any other ??

Another quandary is whether to fit a separate UVC or will the in
built
UV's be good enough? Also I have read in some places that you fit the UVC
after the filter box and some before, the arguments being fitting after
doesn't kill of any of the Nitrifying bacteria, but before helps the
mechanical filter media to remove more of the "clumped" algae cells, any
thoughts?

I'm also debating whether to go for a solid or pre-filtered
submersible
pump (something like the Fishmate 2500), which is advisable? Lastly on
though thoughts of aeration, I will have a slate shelve for the water to
return to help create surface movement, either fed directly from a
pressurised filter or as a bypass on a gravity fed, my pond construction
is
above ground level by a few feet, so the gravity fed would have to be top
exit. Also does anyone else use a separate air pump for aeration or
does
most people just rely on surface agitation?

Any links to sites would be appreciated, my crawl of the web has thrown
up
many conflicting views, suppliers always say THEIR product is the best,
but
I'd rather ask the people who REALLY
know.................................... you!!!!


Thanks for your thoughts in advance



Jason.