View Single Post
  #3  
Old January 22nd 04, 10:57 AM
matt wright
external usenet poster
 
Posts: n/a
Default New Pond Project

Hi Ted, thanks very much for a reply, i was worried no-one would help
Unfortunately the supplier is an ordinary agricultural merchants an
doesn't know what the sheet is made of! They are trying to get hold o
the manufacturers but no luck so far. However I was told by a landscap
architect that silage sheet is good as long as its UV stable. What I'v
got is black in colour and quite thick, say about 0.7mm. Its not show
any signs of cracking while its been stored for the last 8 months.
spoke to another bloke that supplies various linings for slurry pit
and reservoirs and he said if its polypropelene it will be fine an
even if its PVC it will be okay especially if its covered over wit
another layer. I think the butyl pond lining manufacturers don't wan
people to know there are other options. What is EDPM? How much did i
cost and where did you get it?

Matt

Ted wrote:
*Matt,

I used EDPM from a place that manufactures it for usage aroun
chemical and
fuel tanks. I had no problems with it. Do you know what th
material you
are looking at is made of?

"matt wright" wrote i
message
s.com...
I would welcome any advice. I am building a pond for the firs

time, it
is a large pond approx 60 feet by 30 feet and about 6 feet deep i

the
middle. It has been excavated and now I aim to put a layer o

"Teram"
geotextile (bit like weedblock fabric) followed by about 1 inch o

sand
and then I aim to put down "silage sheet", this is the plasti

farmers
use to line silage and slurry pits and comes in very large sizes

It is
much cheaper than official pond liners. Then I intend to cover the
sheet with another layer of geotextile and then sand with patche

of
gravel for cosmetic effect. It will be trickle filled via a smal

pump
from a stream which comes off the mountains. Questions: anyon

else
used silage sheet? I'm pretty certain the sheet is UV stable bu

would
welcome comments and any advice?
--
matt wright


------------------------------------------------------------------------
posted via www.GardenBanter.co.uk

-
matt wrigh
-----------------------------------------------------------------------
posted via www.GardenBanter.co.uk