We did ours by soaking the pot for a few days then using a drill to slowly
drill. The soaking helped keep the pot from cracking. It worked to make a
fountain we had in one of the small ponds, a few years back. KathyAZ
rasta wrote in message ...
hey all

this group has been a valuable source of info and am hoping those that
have drilled holes in pottery can give me some guidance.

i will be using a pottery (clay) urn laid on its side for a return to
the pond and need to drill a hole to accomodate a 1 inch bulkhead
fitting to tie in the dischage of the filter. don't have the first
idea how to go about doing this.

the pond should be up and running mid-week, so i can start
participating in discussions here and (hopefully) help others with my
experiences.

positive vibes, rasta




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----