Thread: Seaclone 100
View Single Post
  #1  
Old September 24th 04, 10:59 PM
Craig Kaplan
external usenet poster
 
Posts: n/a
Default


The secret with this device is to make sure that all of the fittings
are tight and that no air escapes (especially where the water comes out
of the venturie and passes into the skimmer. I use one of the plastic
clamps on this fitting. Also, when you first start it there is not
normally anything collected for a day or so. This is normal and should
not be cause for alarm. You should remember that the amount of waste
collected is proportional to the amount of organic compounds dissolved
in your water. Good tank maintenance habits = less waste collected.
If you feed a little too much (bad idea), that food that dissolves in
the water will end up in the collection cup.


In article , Xdudimus Maximus
wrote:

mine works great inside my sump. Lotsa smelly brown skimmate.


"Adin Pryde" wrote in message
...
Ok ill try that thanks


"Adin Pryde" wrote in message
...
I have a Seaclone 100 and all i can get it to do is dump LOTs of fine
bubbles in my tank and fill the collection cup up with water

this is driveling me up a wall

any help out there ???

please no try putting it in the trash can or through it out a 4th story
window no not the 5th story either please

no try to hit it with a 4lb hammer kinda stuff

i need real advice thanks