jim beam > wrote in
:
> TeGGeR® wrote:
>> Weird...
>>
>> No matter where I lever the trailing arm before tightening the
>> compensator arm, the toe does not change. It's exactly the same as
>> what I measured before I took everything apart.
>>
>> That position is what they return to naturally when I drive onto the
>> newspaper. (I put a thin section of newspaper under the tires so they
>> could pivot more easily.)
>>
> it does change. if you watch the tech in the alignment shop, the
> gauges show it changing as they make their adjustments. but they're
> real small, and as you'll find out driving to & from the alignment
> shop, they make an interesting difference.
>
D'oh!
I just realized my mistake!!!!!
I'm taking the measurements at the BACK of the tire. The reason was that I
couldn't find a good datum point at the front!!
Damn!
Now there's NO WAY I'm going to get the alignment even /close/ myself.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/