Any idea if the Edelbrock 600cfm 1405 Performer + Edelbrock 2131 manifold
will require a metering or jet change on a stock 360 '91 Grand Wagoneer ?


Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"c" > wrote in message
...
> Without knowing what size carb, choke or no choke, and which manifold, it
is
> hard to tell you what the problem could be. What I can tell you is that
> Edelbrock and Holley carbs are both set up from the factory with a general
> tune. This mean the carb may or may not need to be set up properly for
your
> particular engine. In general, the Edelbrock carbs run too rich with the
> factory set up. Normally they will require a metering rod change, and
maybe
> a jet change as well. You also don't specify the cam specs.