Conch Owners and DIY Canopy Makers...

If you guys wouldn't mind taking a look at a couple of posts in A.B.A. I
would appreciate it...

Conch Owners...
m


DIY Canopy makers (or caprenters =))
m

TIA

~Mort

DIY Canopy makers (or caprenters =))
m


Here is a link to the post where I am asking for suggestions on the warping
lid...

m

Hi Mort,

My DIY canopy looks very similar to the one you made. Here are some
pics:

http://dlobryan.bravehost.com/lid_front.jpg

http://dlobryan.bravehost.com/lid_side.jpg

http://dlobryan.bravehost.com/lid_top.jpg


For the lid, I used 3/4" oak veneer plywood and applied 2 coats of stain and
3 coats of polyeurathane on all sides and edges. I applied the same
amounts of stain and poly on the rest of the canopy as well. It has been
over the tank for about 4 months now with no warping... yet.

I have 2 MH lights (250w and 175w) inside and 1 fan.

hth.
Regards,
Darrin

"Mort" wrote in message
...
If you guys wouldn't mind taking a look at a couple of posts in A.B.A. I
would appreciate it...

Conch Owners...
m


DIY Canopy makers (or caprenters =))
m

TIA

~Mort

Glad I am not the only person who leaves the algae scraper in a "parked
position"....
I thought I was lazy alone.... 8)

"Darrin O'Bryan" wrote in message
.. .
Hi Mort,

My DIY canopy looks very similar to the one you made. Here are some
pics:

http://dlobryan.bravehost.com/lid_front.jpg

http://dlobryan.bravehost.com/lid_side.jpg

http://dlobryan.bravehost.com/lid_top.jpg


For the lid, I used 3/4" oak veneer plywood and applied 2 coats of stain
and
3 coats of polyeurathane on all sides and edges. I applied the same
amounts of stain and poly on the rest of the canopy as well. It has been
over the tank for about 4 months now with no warping... yet.

I have 2 MH lights (250w and 175w) inside and 1 fan.

hth.
Regards,
Darrin

"Mort" wrote in message
...
If you guys wouldn't mind taking a look at a couple of posts in A.B.A.
I
would appreciate it...

Conch Owners...
m


DIY Canopy makers (or caprenters =))
m

TIA

~Mort