![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
After a long winters nap, I am back. I didn't post much last season so you all
probably don't remember me, but here I am. I am so excited for the new season! I am in the process of building a filter out of a 70 gal stock tank. I found many ideas and have combined them into my own design. I am trying to figure out what to use for filter media. The nearest pond store, Lowes, Home Depot is 2 1/2 hours away, but I found some cooler pad that I think might work. It is blue, called Dura-Cool. It says it does not decay and is non allergenic. If I cut this into smaller pieces, will this work? Thank you so much. Shawn |
#2
|
|||
|
|||
![]()
I use the blue furnace filters myself. They are sort of spun fiber and see
through, like a scrub brush. I think they call them hogs hair, but they are really some sort of fiber not really hogs hair. I get them at the plumbing store called Naughton's but that is a local store here in Tucson AZ, I think. "Cooler filters" ? as in swamp coolers used in the dry southwest? Most of them have some sort of stuff on them to retard mold and I would check really good to be sure they aren't going to kill your fish. Good Luck what ever you decide to use. Kathy in AZ GaneaRowenna wrote in message ... After a long winters nap, I am back. I didn't post much last season so you all probably don't remember me, but here I am. I am so excited for the new season! I am in the process of building a filter out of a 70 gal stock tank. I found many ideas and have combined them into my own design. I am trying to figure out what to use for filter media. The nearest pond store, Lowes, Home Depot is 2 1/2 hours away, but I found some cooler pad that I think might work. It is blue, called Dura-Cool. It says it does not decay and is non allergenic. If I cut this into smaller pieces, will this work? Thank you so much. Shawn -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#3
|
|||
|
|||
![]()
"Cooler filters" ? as in swamp coolers used in the dry southwest?
Most of them have some sort of stuff on them to retard mold and I would check really good to be sure they aren't going to kill your fish. Good Luck what ever you decide to use. Kathy in AZ Yes, swamp coolers. I am in Northern Nevada and I forget that not everyone uses a swamp cooler. hehe Thanks for the advice, Kathy. I decided to go ahead and try the Dura Cool. I will keep you informed as to what happens to the fish. Shawn |
#4
|
|||
|
|||
![]()
"Cooler filters" ? as in swamp coolers used in the dry southwest?
Most of them have some sort of stuff on them to retard mold and I would check really good to be sure they aren't going to kill your fish. Good Luck what ever you decide to use. Kathy in AZ Yes, swamp coolers. I am in Northern Nevada and I forget that not everyone uses a swamp cooler. hehe Thanks for the advice, Kathy. I decided to go ahead and try the Dura Cool. I will keep you informed as to what happens to the fish. Shawn |
#5
|
|||
|
|||
![]()
I use the blue furnace filters myself. They are sort of spun fiber and see
through, like a scrub brush. I think they call them hogs hair, but they are really some sort of fiber not really hogs hair. I get them at the plumbing store called Naughton's but that is a local store here in Tucson AZ, I think. "Cooler filters" ? as in swamp coolers used in the dry southwest? Most of them have some sort of stuff on them to retard mold and I would check really good to be sure they aren't going to kill your fish. Good Luck what ever you decide to use. Kathy in AZ GaneaRowenna wrote in message ... After a long winters nap, I am back. I didn't post much last season so you all probably don't remember me, but here I am. I am so excited for the new season! I am in the process of building a filter out of a 70 gal stock tank. I found many ideas and have combined them into my own design. I am trying to figure out what to use for filter media. The nearest pond store, Lowes, Home Depot is 2 1/2 hours away, but I found some cooler pad that I think might work. It is blue, called Dura-Cool. It says it does not decay and is non allergenic. If I cut this into smaller pieces, will this work? Thank you so much. Shawn -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#6
|
|||
|
|||
![]() "GaneaRowenna" wrote in message ... After a long winters nap, I am back. I didn't post much last season so you all probably don't remember me, but here I am. I am so excited for the new season! I am in the process of building a filter out of a 70 gal stock tank. I found many ideas and have combined them into my own design. I am trying to figure out what to use for filter media. The nearest pond store, Lowes, Home Depot is 2 1/2 hours away, but I found some cooler pad that I think might work. It is blue, called Dura-Cool. It says it does not decay and is non allergenic. If I cut this into smaller pieces, will this work? Thank you so much. Shawn Newbie in Newsgroups but not testing posting. UK based, years of experience in all sorts of aquatics and also a year in industry testing chemicals. Really, any inert material will do for filtration, either mechanical or biological, the first to kill the flow speed and settle the solids, the second to provide a huge surface area for all the bugs to munch away on the waste. If you're worried about the cooler pad (whatever that is), shake it up hard in some water and see if it forms a persistent surface foam. If it does, I'd avoid it. Alternatively you could put some in a bucket with a small fish for a week. Don't feed (to avoid pollution). What's it made of? Did you know they used to sell glass wool as a filter medium? Can you imagine the damage? Totally unsuitable! If the fish doesn't show any obvious distress then it's probably OK BUT DON'T BANK ON IT. I've used polypropylene garden shading as a filter medium for years without any obvious problems. Got algae? Fit a new filter in the system, with aquatic plants, but watch the roots don't block the outflow, and they'll take out a lot of the nitrogen. They use the same system at sewer works. Grow plants, not algae! Regards to all ponders, Mike. |
#7
|
|||
|
|||
![]() "GaneaRowenna" wrote in message ... Newbie in Newsgroups but not testing posting. UK based, years of experience in all sorts of aquatics and also a year in industry testing chemicals. Really, any inert material will do for filtration, either mechanical or biological, the first to kill the flow speed and settle the solids, the second to provide a huge surface area for all the bugs to munch away on the waste. If you're worried about the cooler pad (whatever that is), shake it up hard in some water and see if it forms a persistent surface foam. If it does, I'd avoid it. Alternatively you could put some in a bucket with a small fish for a week. Don't feed (to avoid pollution). What's it made of? Did you know they used to sell glass wool as a filter medium? Can you imagine the damage? Totally unsuitable! If the fish doesn't show any obvious distress then it's probably OK BUT DON'T BANK ON IT. I've used polypropylene garden shading as a filter medium for years without any obvious problems. Got algae? Fit a new filter in the system, with aquatic plants, but watch the roots don't block the outflow, and they'll take out a lot of the nitrogen. They use the same system at sewer works. Grow plants, not algae! Regards to all ponders, Mike. |
#8
|
|||
|
|||
![]() "GaneaRowenna" wrote in message ... After a long winters nap, I am back. I didn't post much last season so you all probably don't remember me, but here I am. I am so excited for the new season! I am in the process of building a filter out of a 70 gal stock tank. I found many ideas and have combined them into my own design. I am trying to figure out what to use for filter media. The nearest pond store, Lowes, Home Depot is 2 1/2 hours away, but I found some cooler pad that I think might work. It is blue, called Dura-Cool. It says it does not decay and is non allergenic. If I cut this into smaller pieces, will this work? Thank you so much. Shawn Newbie in Newsgroups but not testing posting. UK based, years of experience in all sorts of aquatics and also a year in industry testing chemicals. Really, any inert material will do for filtration, either mechanical or biological, the first to kill the flow speed and settle the solids, the second to provide a huge surface area for all the bugs to munch away on the waste. If you're worried about the cooler pad (whatever that is), shake it up hard in some water and see if it forms a persistent surface foam. If it does, I'd avoid it. Alternatively you could put some in a bucket with a small fish for a week. Don't feed (to avoid pollution). What's it made of? Did you know they used to sell glass wool as a filter medium? Can you imagine the damage? Totally unsuitable! If the fish doesn't show any obvious distress then it's probably OK BUT DON'T BANK ON IT. I've used polypropylene garden shading as a filter medium for years without any obvious problems. Got algae? Fit a new filter in the system, with aquatic plants, but watch the roots don't block the outflow, and they'll take out a lot of the nitrogen. They use the same system at sewer works. Grow plants, not algae! Regards to all ponders, Mike. |
#9
|
|||
|
|||
![]() "GaneaRowenna" wrote in message ... Newbie in Newsgroups but not testing posting. UK based, years of experience in all sorts of aquatics and also a year in industry testing chemicals. Really, any inert material will do for filtration, either mechanical or biological, the first to kill the flow speed and settle the solids, the second to provide a huge surface area for all the bugs to munch away on the waste. If you're worried about the cooler pad (whatever that is), shake it up hard in some water and see if it forms a persistent surface foam. If it does, I'd avoid it. Alternatively you could put some in a bucket with a small fish for a week. Don't feed (to avoid pollution). What's it made of? Did you know they used to sell glass wool as a filter medium? Can you imagine the damage? Totally unsuitable! If the fish doesn't show any obvious distress then it's probably OK BUT DON'T BANK ON IT. I've used polypropylene garden shading as a filter medium for years without any obvious problems. Got algae? Fit a new filter in the system, with aquatic plants, but watch the roots don't block the outflow, and they'll take out a lot of the nitrogen. They use the same system at sewer works. Grow plants, not algae! Regards to all ponders, Mike. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Canister filter media change? | Richard Periut | Reefs | 0 | July 28th 04 08:29 PM |
Cleaning my Fluval Canister Filter | CanadianCray | General | 5 | April 13th 04 06:07 AM |
HOT magnum filter media, etc. | zxcvbob | Plants | 1 | March 24th 04 07:05 AM |
Does the Duetto DJ50 come with filter media? | Harry Muscle | General | 1 | December 30th 03 04:25 PM |
HELP needed: Pond filtration & Filter media in Montreal | MIke | General | 0 | July 22nd 03 08:34 PM |