A Fishkeeping forum. FishKeepingBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishKeepingBanter.com forum » rec.aquaria.freshwater » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

jager heater query



 
 
Thread Tools Display Modes
  #1  
Old February 6th 05, 10:27 PM
sophie
external usenet poster
 
Posts: n/a
Default jager heater query

could anyone with experience of the jäger aquarium heater enlighten me
as to whether "fully submersible" actually MEANS fully submersible? It
has a minimum water line and lots of lovely diagrams indicating how well
insulated the cable is, and an arrow pointing to a double sealing joint,
but no specific instructions as to a maximum level.
I'm assuming that I can in fact put the whole thing underwater (it's
been operating that way for a while now) but I've developed a sudden
paranoia about it. Can't find any definitive info on the net either, and
I thought I'd ask here before ringing the manufacturers...

many thanks for any help,
--
sophie
  #2  
Old February 6th 05, 10:58 PM
Nikki Casali
external usenet poster
 
Posts: n/a
Default



sophie wrote:

could anyone with experience of the jäger aquarium heater enlighten me
as to whether "fully submersible" actually MEANS fully submersible? It
has a minimum water line and lots of lovely diagrams indicating how well
insulated the cable is, and an arrow pointing to a double sealing joint,
but no specific instructions as to a maximum level.
I'm assuming that I can in fact put the whole thing underwater (it's
been operating that way for a while now) but I've developed a sudden
paranoia about it. Can't find any definitive info on the net either, and
I thought I'd ask here before ringing the manufacturers...

many thanks for any help,


Every submersible heater has a minimum water line to prevent users from
overheating the coil and cracking the glass.

Where exactly would the manufacturer place the maximum water level line?
It would be an imaginary line set quite a few feet above the heater. ;-)

Fully submersible == fully submersible.

Nikki

  #3  
Old February 6th 05, 11:03 PM
Bill Stock
external usenet poster
 
Posts: n/a
Default


"sophie" wrote in message
...
could anyone with experience of the jäger aquarium heater enlighten me as
to whether "fully submersible" actually MEANS fully submersible? It has a
minimum water line and lots of lovely diagrams indicating how well
insulated the cable is, and an arrow pointing to a double sealing joint,
but no specific instructions as to a maximum level.
I'm assuming that I can in fact put the whole thing underwater (it's been
operating that way for a while now) but I've developed a sudden paranoia
about it. Can't find any definitive info on the net either, and I thought
I'd ask here before ringing the manufacturers...

many thanks for any help,
--
sophie


Not quite Ebo specific, but I recall a thread about this a few months back.
Apparently the water line thing is a safety standards issue in some
countries like the UK and Canada. Here's the thread:

http://groups-beta.google.com/group/...ac1a64a 4f15b



  #4  
Old February 6th 05, 11:33 PM
Billy
external usenet poster
 
Posts: n/a
Default



"Bill Stock" wrote in message
...
|
| Not quite Ebo specific, but I recall a thread about this a few
months back.
| Apparently the water line thing is a safety standards issue in some
| countries like the UK and Canada. Here's the thread:
|

IIRC, I had an ebo that said "maximum water line" as well as "fully
submersible"., Made me paranoid as well.


  #5  
Old February 7th 05, 07:06 AM
JG
external usenet poster
 
Posts: n/a
Default

Bill is correct. It's a standards issue with the national governing boards
in some countries. That said, it is fully submersible.
"Billy" wrote in message
...


"Bill Stock" wrote in message
...
|
| Not quite Ebo specific, but I recall a thread about this a few
months back.
| Apparently the water line thing is a safety standards issue in some
| countries like the UK and Canada. Here's the thread:
|

IIRC, I had an ebo that said "maximum water line" as well as "fully
submersible"., Made me paranoid as well.




  #6  
Old February 7th 05, 02:45 PM
Nikki Casali
external usenet poster
 
Posts: n/a
Default



Billy wrote:

"Bill Stock" wrote in message
...
|
| Not quite Ebo specific, but I recall a thread about this a few
months back.
| Apparently the water line thing is a safety standards issue in some
| countries like the UK and Canada. Here's the thread:
|

IIRC, I had an ebo that said "maximum water line" as well as "fully
submersible"., Made me paranoid as well.


Sounds like they're trying to hedge their bets!

Nikki

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
When the Heater Breaks.... Ami . Goldfish 10 January 16th 04 06:57 PM
Submersable Heater Melted. Glenn Serpas General 2 December 31st 03 06:19 PM
Ebo Jager operation?? No-Name General 3 December 4th 03 03:05 PM
Ebo Jager heater operation? No-Name Cichlids 1 November 29th 03 04:09 PM
Is it safe to hide the heater in a plastic tube on the inlet flow ? Alan Silver General 7 September 15th 03 05:04 PM


All times are GMT +1. The time now is 03:59 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishKeepingBanter.com.
The comments are property of their posters.