![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hi, everyone.
I recently purchased a used 65 gal reef tank. I am planning to reuse it but it has been in storage for almost a year in a "dirty" condition. I wanted to know what is the best way to remove the old pink / purple algae from the aquarium before setting it back up. I am a little leery about doing too much scraping with a razor blade for fear of scratching the glass. Thanks for all input. Chris |
#2
|
|||
|
|||
![]()
On Jan 16, 11:44*am, Chris Mares wrote:
Hi, everyone. I recently purchased a used 65 gal reef tank. I am planning to reuse it but it has been in storage for almost a year in a "dirty" condition. I wanted to know what is the best way to remove the old pink / purple algae from the aquarium before setting it back up. I am a little leery about doing too much scraping with a razor blade for fear of scratching the glass. Thanks for all input. Chris Can't you fricken see that this is not an active group. Take your quesitions elsewhere like to a real online forum where real people patronize it instead of assholes and morons like TYNK |
#3
|
|||
|
|||
![]()
"Chris Mares" wrote in message
... I recently purchased a used 65 gal reef tank. I am planning to reuse it but it has been in storage for almost a year in a "dirty" condition. I wanted to know what is the best way to remove the old pink / purple algae from the aquarium before setting it back up. I am a little leery about doing too much scraping with a razor blade for fear of scratching the glass. Razor is fine if you soak the tank for a day or two in water with some vinegear in it. You can also use the aquarium grade scaper which is probably made from a softer steel to not scratch glass. The more vinegear the better. Do it in a garage or open air to not brethe in too much of the vinegear. When the stuff is still dry (before you soak it in vinegear water) you my want to try poke on the glass in the middle in hope the algae will pop/peel off without scraping. You might want to pry off as many loose pieces as possible before you soak it... |
#4
|
|||
|
|||
![]()
On Jan 28, 4:27*pm, "Pszemol" wrote:
"Chris Mares" wrote in message ... I recently purchased a used 65 gal reef tank. I am planning to reuse it but it has been in storage for almost a year in a "dirty" condition. I wanted to know what is the best way to remove the old pink / purple algae from the aquarium before setting it back up. I am a little leery about doing too much scraping with a razor blade for fear of scratching the glass. Razor is fine if you soak the tank for a day or two in water with some vinegear in it. You can also use the aquarium grade scaper which is probably made from a softer steel to not scratch glass. The more vinegear the better. Do it in a garage or open air to not brethe in too much of the vinegear. When the stuff is still dry (before you soak it in vinegear water) you my want to try poke on the glass in the middle in hope the algae will pop/peel off without scraping. You might want to pry off as many loose pieces as possible before you soak it... you might want, you might want, you might want, is that all the **** you can say idiot. Face it ****y Pants this forum is dead dead dead thanks to assholes like Wayne and KurtG and of course assholes like you. |
#5
|
|||
|
|||
![]()
On Jan 28, 5:27*pm, "Pszemol" wrote:
"Chris Mares" wrote in message ... I recently purchased a used 65 gal reef tank. I am planning to reuse it but it has been in storage for almost a year in a "dirty" condition. I wanted to know what is the best way to remove the old pink / purple algae from the aquarium before setting it back up. I am a little leery about doing too much scraping with a razor blade for fear of scratching the glass. Razor is fine if you soak the tank for a day or two in water with some vinegear in it. You can also use the aquarium grade scaper which is probably made from a softer steel to not scratch glass. The more vinegear the better. Do it in a garage or open air to not brethe in too much of the vinegear. When the stuff is still dry (before you soak it in vinegear water) you my want to try poke on the glass in the middle in hope the algae will pop/peel off without scraping. You might want to pry off as many loose pieces as possible before you soak it... I did exactly like you say above to a tank last year. It worked fine and is now up and running. |
#6
|
|||
|
|||
![]()
Razor is a good, if you soak a day or two tanks of water with some vinegear it. You can also use aquarium grade scaper This may be caused by a soft steel will not scratch the glass. More vinegear better. It is not in a garage or open brethe in too many vinegear.
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
bottom cleanup | Pat | General | 21 | March 29th 06 05:10 AM |
cleanup crew | Chris Gentry | Reefs | 1 | November 23rd 04 07:41 PM |
Cleanup crew for cichlid tank | Len | Cichlids | 0 | May 22nd 04 07:49 PM |
cleanup crew? | Zerotwist | General | 2 | February 28th 04 10:39 PM |