Fluval 405 under tank placement

I have a 105 gallon tank - if I put the Fluval 405 filters in the cabinet
under the tank, the canister base will be about 4' 10" below the water
level - the instructions say that the base must never be more than 4' 5"
below the water level - the hoses are long enough - is there going to be a
problem with the 4' 10" distance?

*NOTE: There are two Koi-Lo's on this NG*

Pecking at the keyboard with two fingers Texas Yankee at
turned out this gem:

I have a 105 gallon tank - if I put the Fluval 405 filters in the
cabinet under the tank, the canister base will be about 4' 10" below
the water level - the instructions say that the base must never be
more than 4' 5" below the water level - the hoses are long enough -
is there going to be a problem with the 4' 10" distance?
=========================
Why not sit it on something under the tank? Perhaps an empty coffee can or
old flowerpot upended.
--
Koi-Lo....
Aquariums since 1952.
My Pond & Aquarium Pages:
http://tinyurl.com/9do58
~~~~ }((((* ~~~ }{{{{(ö ~~~~ }((((({*

Texas Yankee wrote:
I have a 105 gallon tank - if I put the Fluval 405 filters in the cabinet
under the tank, the canister base will be about 4' 10" below the water
level - the instructions say that the base must never be more than 4' 5"
below the water level - the hoses are long enough - is there going to be a
problem with the 4' 10" distance?

The extra height produces more head pressure. Your filter will pump
somewhat below the rated waterflow. If you can, put it on blocks or a
shelf to bring it closer to 4'.

--
Put the word aquaria in the subject to email me.
Did you read the FAQ? http://faq.thekrib.com