![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Seasons greetings everyone!
I was wondering if anyone out there has ever used metal halide pendants over their fish tanks? I like the idea of having the ability to lower or raise the light as needed. Additionally, metal halide has that shimmer effect that shines into the tank. I am planning on using it over a 75 Gallon tank (48X18X20). I'm wondering if I need to invest in 2 pendants. I would prefer one 250 Watt MH pendant for simplicity and for costs. I figure I can hang it over my tank and get several light zones, i.e. high light need plants would be directly under the glow, slower growers in the periphery. Any thoughts? |
#2
|
|||
|
|||
![]()
metal halide??? what's that??
Just kidding, many pple use it, very popular, and lots of research to be done by you... www.google.com must be used to find MUCH information.... There are alot of users here that use them, but you can use google to do general research -- RedForeman ©® "Ian" wrote in message y.com... Seasons greetings everyone! I was wondering if anyone out there has ever used metal halide pendants over their fish tanks? I like the idea of having the ability to lower or raise the light as needed. Additionally, metal halide has that shimmer effect that shines into the tank. I am planning on using it over a 75 Gallon tank (48X18X20). I'm wondering if I need to invest in 2 pendants. I would prefer one 250 Watt MH pendant for simplicity and for costs. I figure I can hang it over my tank and get several light zones, i.e. high light need plants would be directly under the glow, slower growers in the periphery. Any thoughts? |
#3
|
|||
|
|||
![]()
"Ian" wrote in message
y.com... I am planning on using it over a 75 Gallon tank (48X18X20). I'm wondering if I need to invest in 2 pendants. I would prefer one 250 Watt MH pendant for simplicity and for costs. I figure I can hang it over my tank and get several light zones, i.e. high light need plants would be directly under the glow, slower growers in the periphery. Any thoughts? I don't think you can get away with a single pendant for a 48" tank. You'd end up with much of the tank being awfully dark. I would use two 150W pendants. That will give you just over a watt per liter, which is a little on the high side but, with CO2 and nutrients, you'll get spectacular plant growth. Cheers, Michi. -- Michi Henning Ph: +61 4 1118-2700 ZeroC, Inc. http://www.zeroc.com |
#4
|
|||
|
|||
![]()
"Ian" wrote in message gy.com...
Seasons greetings everyone! I was wondering if anyone out there has ever used metal halide pendants over their fish tanks? I like the idea of having the ability to lower or raise the light as needed. Additionally, metal halide has that shimmer effect that shines into the tank. I am planning on using it over a 75 Gallon tank (48X18X20). I'm wondering if I need to invest in 2 pendants. I would prefer one 250 Watt MH pendant for simplicity and for costs. I figure I can hang it over my tank and get several light zones, i.e. high light need plants would be directly under the glow, slower growers in the periphery. Any thoughts? I'd go, with 2 175w/150w HQI double ended bulbs. Electronic ballast. I use a powercompacts and have a small insert of wood that raises the lights up 2 inches for access and the tank is glass, so I made the hood 1/2" longer on each end to allow the light hood/box to set on these glass 3/8" thick resting post 5" high(the light drops down over these to about 2" over the tank). The hood is open top designed, but uses PC lights. I like MH's, but I do not like large ugly globes hanging. I do like amnd greatlty prefer the HQI lights, these are small, sleek, and they make very small fixtures, roughly 3"x6"x4" small triangular prism shaped. These look nice and work well. They cost about 2x as much. But the long term usage is worth it IMO. But if you want the globe fixtures etc, at least get the electronic ballast for MH's. You will save the difference in $ in light output and bulb life and unlike the tar ballast, these are 100% silent. Regards, Tom Barr |
#5
|
|||
|
|||
![]()
Just make sure the lights are low enough if this will be in a room
with a tv or other things as the lighting can blind ya while sitting on a couch Kasselmann aquarium plants book 65.99 Marcus http://www.aquatic-store.com/ Co2 tanks on sale Power compact bulbs and MH the lowest on the net Co2 regulator and bubble counter with needle valve $75 do you want a FREE CO2 Regulator or FREE CO2 DIFFUSOR???? Swing on by our webbforum to see how to get one!! http://aquatic.yupapa.com/phpbb/index.php On Fri, 19 Dec 2003 02:33:39 GMT, "Ian" wrote: Seasons greetings everyone! I was wondering if anyone out there has ever used metal halide pendants over their fish tanks? I like the idea of having the ability to lower or raise the light as needed. Additionally, metal halide has that shimmer effect that shines into the tank. I am planning on using it over a 75 Gallon tank (48X18X20). I'm wondering if I need to invest in 2 pendants. I would prefer one 250 Watt MH pendant for simplicity and for costs. I figure I can hang it over my tank and get several light zones, i.e. high light need plants would be directly under the glow, slower growers in the periphery. Any thoughts? |
#6
|
|||
|
|||
![]()
Thanks for all the responses everyone. I've got some thinking to do now.
The tank I'm planning on buying has a plastic brace in the center actually. I am slightly fearful that that brace will actually block out a good portion of the light. That's why I'm leaning towards 2 lights, but at twice the cost unfortunately. I dunno. "Blarneytoad" wrote in message ... On Fri, 19 Dec 2003 02:33:39 GMT, "Ian" wrote: Seasons greetings everyone! I was wondering if anyone out there has ever used metal halide pendants over their fish tanks? I like the idea of having the ability to lower or raise the light as needed. Additionally, metal halide has that shimmer effect that shines into the tank. I am planning on using it over a 75 Gallon tank (48X18X20). I'm wondering if I need to invest in 2 pendants. I would prefer one 250 Watt MH pendant for simplicity and for costs. I figure I can hang it over my tank and get several light zones, i.e. high light need plants would be directly under the glow, slower growers in the periphery. Any thoughts? I think you're going to need 2 pendants. 175 watters should be good. Corallife makes them in black and white I believe. I have 2 over my 55g tank with glass plates covering the top-you will get a lot of evaporation with these over a tank.The back 3 inches is uncovered so I typically get plants growing out of the tank in those areas (I've had various plants actually flower) |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shield the Metal Halide or no ? | B | Reefs | 1 | July 30th 04 12:47 PM |
175 metal halide retro | gofaster | Marketplace | 0 | July 8th 04 02:17 AM |
400 Watt Metal Halide ~too much? | John Little | Plants | 1 | December 15th 03 10:05 PM |
metal halide wattage question have 175 w fixture, can i use less wattage bulb? | Steve Sells | Reefs | 1 | November 16th 03 03:40 AM |
Anyone used a "PFO Lighting HQI Mini Metal Halide Pendant" | Angry Garden Salad | Reefs | 0 | September 16th 03 01:01 AM |