Make your own filter

Hi Scott,

You need to post to a website. Some newsreaders block pictures as this is
suppose to be a text only group. I would like to see your filter. ~ jan


On Mon, 12 Jul 2004 22:53:28 -0400, "Scott M." wrote:

Hi everyone,

I just discovered this newsgroup tonight and thought I'd share how I built
my own filter and saved a ton of money. My pond is 15 feet by 9 feet and
about 3 1/2 feet deep. I built my own filter as you can see in the picture.
This filter cost me about $30 Canadian. I went to Walmart and bought the
three drawer unit for $16. I punched a bunch of holes in the bottoms of the
top two drawers. Basically, the water comes in the top into a black pond
basket full of crushed roch. From there it flows down through to the second
drawer, which has 4 sheets of white filter material from the pet store
(another $5). From there, it flows through to the bottom drawer, which has
$3 worth of lava rock in it. A pool fitting on the end of the bottom drawer
allows a hose to be connected to it, providing a gravity fed return to the
pond. I already had the hose and pool fitting and right angle elbow joint
where the water goes into the filter, so I guess you could say the filter is
worth $50, which is still a lot cheaper than a commercial unit. The result?
I have crystal clear water. I did add an accellerator to start the algea
growth in the lava rock (my bio filter portion) and Laguna Green Water
Clarifier to the pond and also an aerator to pump fresh oxygen into the
water so I think is is the combination of all of these things that are
giving me a nice clear pond. Anyways, I can give you more details if anyone
needs them.

Scott
Ottawa, Canada


(Do you know where your water quality is?)