A Fishkeeping forum. FishKeepingBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishKeepingBanter.com forum » ponds » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

High Ph



 
 
Thread Tools Display Modes
  #1  
Old March 31st 04, 05:36 AM
NewbieBill
external usenet poster
 
Posts: n/a
Default High Ph

I will probably be posting regularly for a while untill not only my
pond is in balance but my understanding of it all I have been
bringing this pond back to life for the first time, for me. I am in
sunny Austin, Texas. I felt like I was making excellent progress with
the 'health' of my pond till the last 3 or 4 days. Since then I have
noticed String Algae developing (water is clear) and my ph rising
steadily. Ammonia, Nitrates are at 0, Nitrates minimal if any. Don't
have a hardness test. While I haven't been testing it very long I
felt like my ph WAS normally around 8/8.2, apparently about the norm
around here. Now I am getting readings at bottom of my chart which
only goes to 8.8 and I suspect my color is higher than that. I may
have done (at least) 2 things wrong. Most of my numerous plants and
lillies have only been there a few weeks. When I potted them I did
use a topsoil mix which had no vermiculite, fertilizer etc. but was
somewhat loamy, sandwiched top and bottom by pea gravel. Perhaps no
coincidence 2 days after building a little in-pond stack of river
rocks and Moss Boulder to create a simulated waterfall splash (from my
outflow pipe) I noticed my ph rising (also so did the temperatures and
sunlight). I have been using the same material to raise my pots. So
I guess this post I am soliciting advice as to a direction to attack
first. Most likely the rocks, soil or other things. My first 'bloom'
I really panicked and I don't want to repot all my plants, put them on
what and take away my waterfall, if this is just a balancing thing
that requires smaller adjustments. Thanxx - Bill
  #2  
Old March 31st 04, 06:33 AM
Charles
external usenet poster
 
Posts: n/a
Default High Ph

On 30 Mar 2004 20:36:49 -0800, (NewbieBill) wrote:

I will probably be posting regularly for a while untill not only my
pond is in balance but my understanding of it all I have been
bringing this pond back to life for the first time, for me. I am in
sunny Austin, Texas. I felt like I was making excellent progress with
the 'health' of my pond till the last 3 or 4 days. Since then I have
noticed String Algae developing (water is clear) and my ph rising
steadily. Ammonia, Nitrates are at 0, Nitrates minimal if any. Don't
have a hardness test. While I haven't been testing it very long I
felt like my ph WAS normally around 8/8.2, apparently about the norm
around here. Now I am getting readings at bottom of my chart which
only goes to 8.8 and I suspect my color is higher than that. I may
have done (at least) 2 things wrong. Most of my numerous plants and
lillies have only been there a few weeks. When I potted them I did
use a topsoil mix which had no vermiculite, fertilizer etc. but was
somewhat loamy, sandwiched top and bottom by pea gravel. Perhaps no
coincidence 2 days after building a little in-pond stack of river
rocks and Moss Boulder to create a simulated waterfall splash (from my
outflow pipe) I noticed my ph rising (also so did the temperatures and
sunlight). I have been using the same material to raise my pots. So
I guess this post I am soliciting advice as to a direction to attack
first. Most likely the rocks, soil or other things. My first 'bloom'
I really panicked and I don't want to repot all my plants, put them on
what and take away my waterfall, if this is just a balancing thing
that requires smaller adjustments. Thanxx - Bill



What time of day are you measuring pH?

Diana Walstad reports of a sof****er lake that changed from 5.7 in the
morning to 9.6 at noon. I
this is due to the plants drawing out the CO2 from the water.
--

- Charles
-
-does not play well with others
  #3  
Old March 31st 04, 06:33 AM
Charles
external usenet poster
 
Posts: n/a
Default High Ph

On 30 Mar 2004 20:36:49 -0800, (NewbieBill) wrote:

I will probably be posting regularly for a while untill not only my
pond is in balance but my understanding of it all I have been
bringing this pond back to life for the first time, for me. I am in
sunny Austin, Texas. I felt like I was making excellent progress with
the 'health' of my pond till the last 3 or 4 days. Since then I have
noticed String Algae developing (water is clear) and my ph rising
steadily. Ammonia, Nitrates are at 0, Nitrates minimal if any. Don't
have a hardness test. While I haven't been testing it very long I
felt like my ph WAS normally around 8/8.2, apparently about the norm
around here. Now I am getting readings at bottom of my chart which
only goes to 8.8 and I suspect my color is higher than that. I may
have done (at least) 2 things wrong. Most of my numerous plants and
lillies have only been there a few weeks. When I potted them I did
use a topsoil mix which had no vermiculite, fertilizer etc. but was
somewhat loamy, sandwiched top and bottom by pea gravel. Perhaps no
coincidence 2 days after building a little in-pond stack of river
rocks and Moss Boulder to create a simulated waterfall splash (from my
outflow pipe) I noticed my ph rising (also so did the temperatures and
sunlight). I have been using the same material to raise my pots. So
I guess this post I am soliciting advice as to a direction to attack
first. Most likely the rocks, soil or other things. My first 'bloom'
I really panicked and I don't want to repot all my plants, put them on
what and take away my waterfall, if this is just a balancing thing
that requires smaller adjustments. Thanxx - Bill



What time of day are you measuring pH?

Diana Walstad reports of a sof****er lake that changed from 5.7 in the
morning to 9.6 at noon. I
this is due to the plants drawing out the CO2 from the water.
--

- Charles
-
-does not play well with others
  #10  
Old April 1st 04, 02:45 PM
external usenet poster
 
Posts: n/a
Default High Ph

yes, if he doesnt have much alkalinity (calcium) he needs to add some organic
dolomitic limestone to buffer the water. I have lake water with some calcium, but
not enough so I add dolomitic limestone to make sure I got good buffering.
good loam and pea gravel will not affect pH. ammonia can drive the pH up tho.
Ingrid

Charles wrote:
What time of day are you measuring pH?

Diana Walstad reports of a sof****er lake that changed from 5.7 in the
morning to 9.6 at noon. I
this is due to the plants drawing out the CO2 from the water.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List Manager: Puregold Goldfish List
http://puregold.aquaria.net/
www.drsolo.com
Solve the problem, dont waste energy finding who's to blame
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Unfortunately, I receive no money, gifts, discounts or other
compensation for all the damn work I do, nor for any of the
endorsements or recommendations I make.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
RO and high pH Walter Dorriné Reefs 0 May 27th 04 03:00 PM
Do I have the right mix of my ATI T5 High Output aquarium bulbs? Ed Schreibman Reefs 1 April 30th 04 02:43 PM
High DKh Dragon Slayer Reefs 2 August 19th 03 01:08 AM
Muratic Acid High PH High Alkaline Steve General 6 July 25th 03 12:54 AM


All times are GMT +1. The time now is 05:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishKeepingBanter.com.
The comments are property of their posters.