![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
"RichToyBox" wrote in message
news:wmcUc.22180$mD.10813@attbi_s02... The KH is consumed to an extent with all filters. trim Chem The pressurized filters, bead filters are generally associated with heavier fish loads than the garden pond with smaller filters, and therefore more food to be converted, more acid, more demand for carbonates/bicarbonates to prevent a pH crash. Great explanation, thanks. -- Crashj |
#12
|
|||
|
|||
![]()
The Filtoclear as well as the Fishmate do NOT come with a pump. The
Oase comes with a 9 watt UV and I think Fishmate sells a model with the UV included. You'll have to buy a pump separately and connect to the filter using tubing or PVC pipe. I looked at the Fishmate also but I've learned that you get what you pay for and decided to dish out the cash on the Oase. - RL "Gareee©" wrote in message ... "Rich L" wrote in message om... I purchased an OASE filtoclear 3000 (pondliner.com) for my 1800 gallon koi pond. ... Does this need an additional pump, or is one built in? We were considering the UV solution, and this kind of integrates a UV and a filter, so might actually be worth the shell out of cash... |
#13
|
|||
|
|||
![]()
I just added a bead filter to my smaller pond this year. I have not found
that it needs any more baking soda than it used to require. I am very diligent about measuring and maintaining a minimum of 100 ppm, but generally don't measure how much I use. A 12 pound bag from the discount club is cheap, and I dump in about 8 pounds into the larger pond and about 4 pounds into the smaller pond and wait for the KH to fall, which could be 3 or 4 weeks. A veggie filter of the anacharis and other submerged plants will actually increase the KH without addition of baking soda and help to stabilize the pH significantly, but my koi love those types of veggies and without a separate pond that form of filter would last only minutes. -- RichToyBox http://www.geocities.com/richtoybox/index.html "~ jan JJsPond.us" wrote in message ... Case in point, one of our ponders started out with pressurized, and was about ready to take out stock in Baking Soda the way he went thru it. He has since converted to a gravity fed filter, and says it's a rare day that he needs BSoda... and his fish have gotten bigger in the meantime. So there has to be something directly to do with that type of filter, not the pond, per se, imo. ~ jan On Tue, 17 Aug 2004 00:32:28 GMT, "RichToyBox" wrote: The KH is consumed to an extent with all filters. The bacteria use the carbonates to help with the digestion/conversion of ammonia to nitrite, giving off a Hydrogen ion, and then in the conversion of nitrite to nitrate, 2 Hydrogen ions are given off. These hydrogen ions are acid and they use the carbonates to neutralize the acid and convert the hydrogen ions with CO3 to CO2 and water. The pressurized filters, bead filters are generally associated with heavier fish loads than the garden pond with smaller filters, and therefore more food to be converted, more acid, more demand for carbonates/bicarbonates to prevent a pH crash. ~Power to the Porg, Flow On!~ |
#14
|
|||
|
|||
![]()
I wish that I could have the submerged plants to provide some of my
buffering, but the fish would eat it all. Right now, I am using an upflow filter of crushed oyster shell and baking soda. -- RichToyBox http://www.geocities.com/richtoybox/index.html "Hal" wrote in message ... On Fri, 20 Aug 2004 01:04:32 GMT, "RichToyBox" wrote: A veggie filter of the anacharis and other submerged plants will actually increase the KH without addition of baking soda and help to stabilize the pH significantly, but my koi love those types of veggies and without a separate pond that form of filter would last only minutes. I envy your success at increasing KH with submerged plants and wonder how do you anchor them to the bottom? The reason I ask, is because I tried gravel and it became a bed of yuck that had to be cleaned once a year and that got old about the same time I did. Regards, Hal |
#15
|
|||
|
|||
![]()
Hal,
It sounds like your filter is working very well, and it does keep the large debris out of the system. If you have enough limestone, as the pH starts to drop, it will start to dissolve and buffer the pH. It is solid KH, and is hard to measure with a test kit, since it is not in solution. If your pH is relatively stable and you haven't crashed, you may have plenty of the limestone. My importer uses oyster shell for the same purpose, and nearly half of his filter chamber is filled with oyster shells. BTW his filters are nearly as large as his tanks. -- RichToyBox http://www.geocities.com/richtoybox/index.html "Hal" wrote in message ... On Tue, 24 Aug 2004 01:18:36 GMT, "Richard E. Steele" wrote: I wish that I could have the submerged plants to provide some of my buffering, but the fish would eat it all. Right now, I am using an upflow filter of crushed oyster shell and baking soda. I'm crushed! I thought I was on the brink of discovering something new and workable. I've been using garden lime for several years now and a couple years ago I added lots of baking soda and gypsum to raise the KH, but I created a great environment for string algae so I stopped the baking soda and gypsum. The limestone stops dissolving when the pH gets to 7.8 and my KH hardly gets up to 3 degrees. The rainfall has become so acid, every time it rains I wonder if this will be the incident that causes a pH crash. So far the limestone seems to be preventing a crash, but my KH readings are way below 100 ppm. I could use some submerged plants. The wood box that I built for a plant pond is beginning to rot and sag so now I'm thinking about rebuilding it into two plant ponds, one for floaters and one for submerged plants, but that still leaves the problem of keeping the submerged plants from floating out and keeping the bottom clean. When I took out the gravel out of the plant pond I made a sweeper from a pipe I ran along one side of the bottom and it seems to keep the bottom pretty clean. The only thing there after several months is some empty black Japanese snail shells and the clinging algae. My filter isn't anything to brag about. It is, gravity flow, three barrels the first made to circle the water and settle the heavy stuff, the second has a few squares of 3/4 and 1/2 fence mesh backed by a window screen which needs cleaning every week and the third contains the pump, but my weekly readings are 0 ammonia, nitrites and nitrates. Regards, Hal |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pump Filters constantly clogging | RussellinMD | General | 8 | March 6th 04 10:40 PM |
Eheim filters | McEve | General | 2 | December 9th 03 11:10 PM |
[Slightly OT] Aquarium filters - alternative use? | Flash Wilson | General | 5 | December 4th 03 11:38 PM |
D-I-Y replacement filters for penguin bio-wheels | E.Otter | Goldfish | 5 | October 8th 03 05:17 AM |