![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
"Wayne Sallee" wrote in message ...
Pszemol wrote on 11/19/2007 9:12 PM: For the bathroom heater ? This is the simple one... How much would you want to pay for it? :-) I think that would be a hard question to answer without seeing the product. Wayne, I said that one was simple: http://www.intermatic.com/images/ins...158ei12085.pdf http://www.intermatic.com/images/ins...158ei12086.pdf They are ideal for the resistive loads up to 15A (1800W) like your bathroom lamp heater. Pretty simple and cheap. I got one of these for my bathroom for $24.99 at Home Depot. Skimmer switching problem is slightly more complicated due to the reverse polarity. You want to switch the pump OFF for some time not turn it ON like the bathroom heater... What you need is a shut-off switch with a normally closed output - I have not found one like this yet... But you can workaround the problem :-) Get a normal auto shut-off switch like linked above and also a relay with a coil running on your AC voltage (120VAC in US, 230VAC in Europe). Use the auto shut-off switch to power the relay coil instead of the pump and connect pump to the normally closed relay output contacts. This way, when the auto shut-off swtich is iddle (OFF) the relay coil is not energized and the current can flow through the normally closed relay contacts to the pump. When you press the button on the auto shut-off switch you will energize relay coil and move its normally closed contacts to the OFF position - in consequence turning off the pump for a programmed time with the auto shut-off timer. Simple enough? |
#2
|
|||
|
|||
![]()
KurtG wrote:
Cool. I'd love one for my bathroom heater. They've made these for decades. Check out Grainger. Bet you'll find something suitable there. George Patterson Worry doesn't improve the future; it just ruins the present. |
#3
|
|||
|
|||
![]() "George Patterson" wrote in message news:LPr0j.43815$dl4.30608@trnddc04... KurtG wrote: Cool. I'd love one for my bathroom heater. They've made these for decades. Check out Grainger. Bet you'll find something suitable there. George Patterson Worry doesn't improve the future; it just ruins the present. I looked at the Granger site. They have 100's of timers. I wouldn't know where to start! Jim |
#4
|
|||
|
|||
![]()
"jthread" wrote in message ...
I looked at the Granger site. They have 100's of timers. I wouldn't know where to start! Go to Home Depot or Menards to their electrical section and ask the guy for the auto shut-off switch or timer for your bathroom. They will have at least two kinds: mechanical with spring wound knob or electronic one with push buttons. Electronic ones are silent and more reliable - good looking and not expensive I got one for $25. |
|
Thread Tools | |
Display Modes | |
|
|