If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
oil pan for 3.4 in an XJ?
Ok, supposedly I was wrong about the 2.8L pan not fitting a 3.4L. If that's the case then what can I do to prevent a replacement pan from getting dinged by the axle? Somehow or another the pan managed to get whacked by the axle and the dent creased the pan enough to cause splits that leak. Anyone have a clue as to whether the gasket will work? While I'm in here what's it take to deal with a rear seal leak? It may or may not have one. This poor old beast had to pull several tons of dirt this spring and it seems like it might have developed a leak to the rear of the engine. Doesn't seem to be a valve cover so I'm left guessing about the rear seal. If I'm in there dealing with pan I might as well fix the rear if it's shot. Anyone got a good supplier they'd recommend? Thanks, -Bill Kearney |
Thread Tools | |
Display Modes | |
|
|