If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
F.S. RUST FREE 80's BLAZER,PICKUP PARTS, in NH, ME (Military)
Hi
We recently bought some nice US MILITARY SURPLUS CHEVY 1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) These are the militarized versions of the standard civilian pickups and blazers (camo paint, reenforced frames, gun mounts, radio mounts, 24 volt, special towing and lifting equipment). We are parting some of them out in Southern Maine, and Southern NH. We have all types of parts available EXCEPT ENGINES FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL THESE) Most of these vehicles are RUST FREE or have very little rust. We have been selling many parts to restore civilian trucks, or restore the military version. PARTS FIT: 1981-87 PICKUPS 1981-90 BLAZERS, SUBURBANS Some parts can be adapted to other vehicles like AXLES. SOME PARTS FOR SALE A 1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. $1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS might be available seperatly. 1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). GM 10 bolt (is the front DANA 44?, somwe people have said yes??) 3.08 gears, disk breaks in front, drum in rear. locking hubs. bent tie rod , only $200.00 set straight tie rod $250.00 set GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) PERFECT FRONT FENDERS $75.00 COMPLETE DOORS WITH GLASS $150.00 RADIATOR SUPPORTS 25.00 PICKUP CABS $300.00 - $500.00 PICKUP TAILGATES $150.00 FRONT GRILL GUARDS (MILITARY) $75.00 FRONT BUMPERS 75.00 REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 STRIPPED BLAZER TAILGATES $100-150.00 RUST FREE PICKUP BEDS WITH DENTS, ASK! RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) " " " (WITH GLASS $100.00) Some other parts such as all the military accesories, seats, instruments, drive train, etc, ASK, ASK, ASK 208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, With assorted other parts, WITH paperwork to register. About $1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) Anyway these are a few of the parts we're selling off these vehicles. remember, rust free parts with dents are less. (rusted stuff going to scrap pile). So, just tell us what part you need. and we'll reply. SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS Reply to REMOVE,REMOVE from the return address to reply. Thanks for your time. Ron |
Ads |
#2
|
|||
|
|||
Hi UPDATE: UPDATE: OOPS, we left out we would really only like to sell the bigger parts locally (So. NH, So, Maine). But small parts we can ship. If you need a bunch of parts and it's worth it to load up a pallet, we can do that and arrange truck shipping (free loading with forklift). Also if you have any problem replying to email address, try again or post your problem to list (SPAM blocker might be blocking some addresses?). Thanks for Looking __________________________________________________ _______ We recently bought some nice US MILITARY SURPLUS CHEVY 1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) These are the militarized versions of the standard civilian pickups and blazers (camo paint, reenforced frames, gun mounts, radio mounts, 24 volt, special towing and lifting equipment). We are parting some of them out in Southern Maine, and Southern NH. We have all types of parts available EXCEPT ENGINES FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL THESE) Most of these vehicles are RUST FREE or have very little rust. We have been selling many parts to restore civilian trucks, or restore the military version. PARTS FIT: 1981-87 PICKUPS 1981-90 BLAZERS, SUBURBANS (some parts fit 70's trucks too) Some parts can be adapted to other vehicles like AXLES. SOME PARTS FOR SALE A 1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. $1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS might be available seperatly. 1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). GM 10 bolt (is the front DANA 44?, somwe people have said yes??) 3.08 gears, disk breaks in front, drum in rear. locking hubs. bent tie rod , only $200.00 set straight tie rod $250.00 set GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) PERFECT FRONT FENDERS $75.00 COMPLETE DOORS WITH GLASS $150.00 RADIATOR SUPPORTS 25.00 PICKUP CABS $300.00 - $500.00 PICKUP TAILGATES $150.00 FRONT GRILL GUARDS (MILITARY) $75.00 FRONT BUMPERS 75.00 REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 STRIPPED BLAZER TAILGATES $100-150.00 RUST FREE PICKUP BEDS WITH DENTS, ASK! RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) " " " (WITH GLASS $100.00) Some other parts such as all the military accesories, seats, instruments, drive train, etc, ASK, ASK, ASK 208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, With assorted other parts, WITH paperwork to register. About $1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) Anyway these are a few of the parts we're selling off these vehicles. remember, rust free parts with dents are less. (rusted stuff going to scrap pile). So, just tell us what part you need. and we'll reply. SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS Reply to REMOVE,REMOVE from the return address to reply. Thanks for your time. Ron |
#3
|
|||
|
|||
Hi UPDATE: UPDATE: OOPS, we left out we would really only like to sell the bigger parts locally (So. NH, So, Maine). But small parts we can ship. If you need a bunch of parts and it's worth it to load up a pallet, we can do that and arrange truck shipping (free loading with forklift). Also if you have any problem replying to email address, try again or post your problem to list (SPAM blocker might be blocking some addresses?). Thanks for Looking __________________________________________________ _______ We recently bought some nice US MILITARY SURPLUS CHEVY 1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) These are the militarized versions of the standard civilian pickups and blazers (camo paint, reenforced frames, gun mounts, radio mounts, 24 volt, special towing and lifting equipment). We are parting some of them out in Southern Maine, and Southern NH. We have all types of parts available EXCEPT ENGINES FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL THESE) Most of these vehicles are RUST FREE or have very little rust. We have been selling many parts to restore civilian trucks, or restore the military version. PARTS FIT: 1981-87 PICKUPS 1981-90 BLAZERS, SUBURBANS (some parts fit 70's trucks too) Some parts can be adapted to other vehicles like AXLES. SOME PARTS FOR SALE A 1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. $1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS might be available seperatly. 1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). GM 10 bolt (is the front DANA 44?, somwe people have said yes??) 3.08 gears, disk breaks in front, drum in rear. locking hubs. bent tie rod , only $200.00 set straight tie rod $250.00 set GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) PERFECT FRONT FENDERS $75.00 COMPLETE DOORS WITH GLASS $150.00 RADIATOR SUPPORTS 25.00 PICKUP CABS $300.00 - $500.00 PICKUP TAILGATES $150.00 FRONT GRILL GUARDS (MILITARY) $75.00 FRONT BUMPERS 75.00 REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 STRIPPED BLAZER TAILGATES $100-150.00 RUST FREE PICKUP BEDS WITH DENTS, ASK! RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) " " " (WITH GLASS $100.00) Some other parts such as all the military accesories, seats, instruments, drive train, etc, ASK, ASK, ASK 208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, With assorted other parts, WITH paperwork to register. About $1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) Anyway these are a few of the parts we're selling off these vehicles. remember, rust free parts with dents are less. (rusted stuff going to scrap pile). So, just tell us what part you need. and we'll reply. SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS Reply to REMOVE,REMOVE from the return address to reply. Thanks for your time. Ron |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
# Get FREE Sony VAIO, iPod, Xbox, PlayStation, or Cell Phone when you spend $40..!! | TSR | Corvette | 0 | October 6th 04 10:24 AM |
F.S. 85 GM DANA 60, 1ton 4x4 AXLES, 4.56 gears, Detroit Locker. in NH,ME | MilitaryTruckParts | 4x4 | 8 | March 20th 04 01:20 PM |