A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Chrysler
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

87 Reliant, power loss and stalls. Got codes but dunno what.



 
 
Thread Tools Display Modes
  #1  
Old March 10th 06, 12:03 AM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.

Hi. My 87 Reliant (2.5L) stalls when stopping, especially when colder.
Hesitates when running, and has low power and bad mileage. I got codes
33 and 34. As per a list of codes, they refer to AC and speed control,
but my car doesn't have AC not cruise. Anyboody knows of alternative
interpretations that may give me clues? Speed sensor maybe?

Thanks a lot

Ads
  #2  
Old March 10th 06, 05:24 AM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.



streblo wrote:
> Hi. My 87 Reliant (2.5L) stalls when stopping, especially when colder.
> Hesitates when running, and has low power and bad mileage. I got codes
> 33 and 34. As per a list of codes, they refer to AC and speed control,
> but my car doesn't have AC not cruise. Anyboody knows of alternative
> interpretations that may give me clues? Speed sensor maybe?
>
> Thanks a lot


Hi streblo...

Not a mechanic, so I stand ready to be corrected, but I think
you'll find that "speed control" doesn't refer to cruise control,
but rather to the speed sensor...

I further suggest that it's in the transaxle, and is responsible
for "deciding" whether the car is idling or coasting, and the
computer uses that information to determine where to put the idle
air control motor.

Take care.

Ken

  #3  
Old March 10th 06, 06:56 AM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.


"Ken Weitzel" > wrote in message
news:%b7Qf.129690$H%4.16070@pd7tw2no...
>
>
> streblo wrote:
>> Hi. My 87 Reliant (2.5L) stalls when stopping, especially when colder.
>> Hesitates when running, and has low power and bad mileage. I got codes
>> 33 and 34. As per a list of codes, they refer to AC and speed control,
>> but my car doesn't have AC not cruise. Anyboody knows of alternative
>> interpretations that may give me clues? Speed sensor maybe?
>>
>> Thanks a lot

>
> Hi streblo...
>
> Not a mechanic, so I stand ready to be corrected, but I think
> you'll find that "speed control" doesn't refer to cruise control,
> but rather to the speed sensor...


Code 34=Speed control solenoid circuit driver. This code will be set if
vehicle does not have cruise. 33 will also be set if no A/C.

Vehicle speed sensor would be code 15.


>
> I further suggest that it's in the transaxle, and is responsible
> for "deciding" whether the car is idling or coasting, and the
> computer uses that information to determine where to put the idle
> air control motor.
>
> Take care.
>
> Ken
>



  #4  
Old March 10th 06, 04:40 PM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.

So Mike, this means that 34 and 33 will be set as default codes in my
cruise-less and AC-less car? in other words, I'm getting no fault codes
in spite of the evident failures. Any ideas on where to loook first?

  #5  
Old March 11th 06, 07:37 AM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.


"streblo" > wrote in message
oups.com...
> So Mike, this means that 34 and 33 will be set as default codes in my
> cruise-less and AC-less car? in other words, I'm getting no fault codes
> in spite of the evident failures.


Yes. I don't know why chrysler did it that way but if you don't have cruise
or A/C, those fault codes with be set.


Any ideas on where to loook first?
>


Don't know how many miles you have on that but a compression test might be
a good place to start. Then I would check the usual, plugs, wires, cap,
rotor. You didn't mention if you have a carb or fuel injection. If it's
carbureted it might be time for an overhaul or replacement. If it's fuel
injected check the idle speed motor. You might also want to hook up a scan
tool that can read sensor data while on a road test to see if you have a
sensor that is out of spec, but not out enough to set a code. A bad O2
sensor or MAP sensor may cause those symptoms.


  #6  
Old March 11th 06, 08:36 AM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.

I would look for vacuum leaks and do a basic tune up. The other possibility
but a long shot would be the torque converter lockup isn't coming unlocked,
but look to the easy stuff 1st.
"streblo" > wrote in message
oups.com...
> Hi. My 87 Reliant (2.5L) stalls when stopping, especially when colder.
> Hesitates when running, and has low power and bad mileage. I got codes
> 33 and 34. As per a list of codes, they refer to AC and speed control,
> but my car doesn't have AC not cruise. Anyboody knows of alternative
> interpretations that may give me clues? Speed sensor maybe?
>
> Thanks a lot
>



  #7  
Old March 11th 06, 09:44 AM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.

Hi, I have an 88 reliant and I am almost experiencing what you are going
thru. My 2.5 liter 4 cyclinder has about 300 000 plus kilometers on it,
and I do have aslight power problem with starting and idoling. it tends to
want to stall and idol very roughly, even though its fuel injected,
something is not right... Ii replaced all spark plugs wires cap and rotor
and yet its been almost a year since I replaced it entirely, it still runs
roughly in both warm and cold temps. I think my problem may be coolant
related. have a leaky radiator and leak about 2 liters of water every 2nd
day i have to refill it, that is when it really loses power and becomes
sluggish in acceleration when water is low. Not sure if this is of any
help to you so thought i may run this issue by you.

  #8  
Old March 17th 06, 09:19 PM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 87 Reliant, power loss and stalls. Got codes but dunno what.


"streblo" > wrote in message
oups.com...
> The main problem was a faulty spark, the car was actually running with
> 3 cyls. It runs well now but it will not start with the MAP sensor
> connected. I get a series of codes related with MAP (13, 14) so I'll
> get a used sensor to se what (a new one is about $100).
>
> Cheers
>
> downwithdodgeandchrysler wrote:
> > Hi, I have an 88 reliant and I am almost experiencing what you are going
> > thru. My 2.5 liter 4 cyclinder has about 300 000 plus kilometers on it,
> > and I do have aslight power problem with starting and idoling. it tends

to
> > want to stall and idol very roughly, even though its fuel injected,
> > something is not right... Ii replaced all spark plugs wires cap and

rotor
> > and yet its been almost a year since I replaced it entirely, it still

runs
> > roughly in both warm and cold temps. I think my problem may be coolant
> > related. have a leaky radiator and leak about 2 liters of water every

2nd
> > day i have to refill it, that is when it really loses power and becomes
> > sluggish in acceleration when water is low. Not sure if this is of any
> > help to you so thought i may run this issue by you.

>

If the car will not start with the map sensor connected and will when it is
disconnected you found your problem!!! replace the map sensor because it is
shorted out.

Glenn Beasley
Chrysler Tech


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A8 4.0 TDI Quattro Stalls / Power Loss stanhigham Audi 1 November 20th 05 06:44 PM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 July 25th 05 05:29 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 July 10th 05 05:24 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 June 8th 05 05:28 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 May 24th 05 05:27 AM


All times are GMT +1. The time now is 10:57 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.