If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Inoperable winch
I have a 2001 Yamaha Kodiak 4x4 atv and it has a Warn winch on it. My
particular setup utilizes a solenoid and has a rocker type switch to control in and out as opposed to the usual disc type (roto)switch. The winch does not work. I changed the solenoid, and it still won't work. I tested the old solenoid, and it is good. What I would like, is if someone can give me some advice on where to find troubleshooting info on winches. No doubt, I want to fix my current problem, but I would much rather do some reading, and learn how the system is suppose to work (and be wired) from battery to switch to solenoid to winch, so that I can fix problems in the future. Please advise on where I can find proper wiring info, and an explanation of what each part of the circuit does during normal operation. Thanks b-c-robert |
Ads |
#2
|
|||
|
|||
You have a good winch, and I see you already asked the alt.atv group. Why
not go to the source? http://www.warn.com/corporate/customerservice.shtml "b-c-robert" > wrote in message oups.com... >I have a 2001 Yamaha Kodiak 4x4 atv and it has a Warn winch on it. My > particular setup utilizes a solenoid and has a rocker type switch to > control in and out as opposed to the usual disc type (roto)switch. The > winch does not work. I changed the solenoid, and it still won't work. I > tested the old solenoid, and it is good. What I would like, is if > someone can give me some advice on where to find troubleshooting info > on winches. No doubt, I want to fix my current problem, but I would > much rather do some reading, and learn how the system is suppose to > work (and be wired) from battery to switch to solenoid to winch, so > that I can fix problems in the future. Please advise on where I can > find proper wiring info, and an explanation of what each part of the > circuit does during normal operation. > > > Thanks > b-c-robert > |
#3
|
|||
|
|||
Hey Robert,
Rusted is right. I had some issues with my winch, and contacted Warn Industries through their technical Support, and it took a few days, but they did get back to me. When you contact them, be sure to give them your model # , Serial # and request all wiring diagrams and trouble shooting info. I did this and they emailed me back all the pdf documents and everything needed to get it right. They were great! b-c-robert wrote: >I have a 2001 Yamaha Kodiak 4x4 atv and it has a Warn winch on it. My >particular setup utilizes a solenoid and has a rocker type switch to >control in and out as opposed to the usual disc type (roto)switch. The >winch does not work. I changed the solenoid, and it still won't work. I >tested the old solenoid, and it is good. What I would like, is if >someone can give me some advice on where to find troubleshooting info >on winches. No doubt, I want to fix my current problem, but I would >much rather do some reading, and learn how the system is suppose to >work (and be wired) from battery to switch to solenoid to winch, so >that I can fix problems in the future. Please advise on where I can >find proper wiring info, and an explanation of what each part of the >circuit does during normal operation. > >Thanks >b-c-robert -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
#4
|
|||
|
|||
Thanks for the help guys,,,, I'll send an e-mail today
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jeep TJ Rubicon Express Springs w/ winch? | Derek Proctor | Jeep | 0 | December 1st 04 11:48 PM |
Toyota Sequoia Winch Mouting options? | Bret | 4x4 | 1 | July 9th 04 01:47 AM |
Wiring for Winch | Scott C. | 4x4 | 26 | April 5th 04 03:21 AM |