![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I have noticed here lately that the gauges (temp, oil, and fuel) are
sometimes reading higher than normal. I have seen them sometimes jump to the high side of the gauge then come back down to normal. The usual readings are Temp: 3 marks from "C", Oil: 2-3 marks from "H" while cruising. But lately the temp has been 3 marks from "H" and Oil is almost full scale (right). My first thought is something is wrong with the motor, but I have seen them all come down at the same time at the same rate, which leads me to believe there is something wrong with the gauge cluster. The fuel gauge also jumps about 3 marks when the other 2 are moving. Can anyone point me in the right direction as to where to start looking? Thanks for your help!!! -- Nick <Remove number one if replying by electronic mail> |
Ads |
#2
|
|||
|
|||
![]()
N.Cass wrote:
> I have noticed here lately that the gauges (temp, oil, and fuel) are > sometimes reading higher than normal. I have seen them sometimes jump to > the high side of the gauge then come back down to normal. The usual > readings are Temp: 3 marks from "C", Oil: 2-3 marks from "H" while > cruising. But lately the temp has been 3 marks from "H" and Oil is > almost full scale (right). My first thought is something is wrong with > the motor, but I have seen them all come down at the same time at the > same rate, which leads me to believe there is something wrong with the > gauge cluster. The fuel gauge also jumps about 3 marks when the other 2 > are moving. > > Can anyone point me in the right direction as to where to start looking? > > Thanks for your help!!! On that vintage of Mopar instrument cluster, the fuel, temp and oil pressure guages are all fed from an instrument cluster voltage regulator rather than from direct 12V power. The regulator nominally delivers 5 volts average, but the factory regulators are very crude thermal switches that cycle about 2-3 times a second and depend on the slow response of the guages to average out the voltage. Yours is sticking occasionally. If you search the web for "instrument cluster voltage regulator" you'll find several articles for replacing the thermal regulator with a silicon voltage regulator from Radio Shack. Makes the guages behave MUCH more accurately. Or if you prefer "plug and go," you can get a replacement original-style voltage regulator from NAPA. Its a little silver metal box somewhere on the back of the instrument cluster. It plugs in with either 3 or 4 spade plugs. |
#3
|
|||
|
|||
![]()
N.Cass wrote:
> I have noticed here lately that the gauges (temp, oil, and fuel) are > sometimes reading higher than normal. I have seen them sometimes jump to > the high side of the gauge then come back down to normal. The usual > readings are Temp: 3 marks from "C", Oil: 2-3 marks from "H" while > cruising. But lately the temp has been 3 marks from "H" and Oil is > almost full scale (right). My first thought is something is wrong with > the motor, but I have seen them all come down at the same time at the > same rate, which leads me to believe there is something wrong with the > gauge cluster. The fuel gauge also jumps about 3 marks when the other 2 > are moving. > > Can anyone point me in the right direction as to where to start looking? > > Thanks for your help!!! On that vintage of Mopar instrument cluster, the fuel, temp and oil pressure guages are all fed from an instrument cluster voltage regulator rather than from direct 12V power. The regulator nominally delivers 5 volts average, but the factory regulators are very crude thermal switches that cycle about 2-3 times a second and depend on the slow response of the guages to average out the voltage. Yours is sticking occasionally. If you search the web for "instrument cluster voltage regulator" you'll find several articles for replacing the thermal regulator with a silicon voltage regulator from Radio Shack. Makes the guages behave MUCH more accurately. Or if you prefer "plug and go," you can get a replacement original-style voltage regulator from NAPA. Its a little silver metal box somewhere on the back of the instrument cluster. It plugs in with either 3 or 4 spade plugs. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Come on, let's get this thing moving!!! | Tim | Driving | 4 | January 11th 05 03:54 AM |
2004 BMW 525i- Winter Mats keep moving near gas pedal! | KOS | BMW | 9 | December 25th 04 07:28 PM |
Adding oil/water gauges to an E36 | Bob | BMW | 7 | November 1st 04 09:46 AM |
anyone sell 60mm (outer case diameter) auto gauges? | cgbusch | Antique cars | 0 | September 7th 03 07:01 PM |