If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
You didn't need axle shims, t-case drop, track bar or anything else? Just
the kit and the shocks? Sorry for asking so many times, I just don't want any suprises. Carl "Kevin in San Diego" > wrote in message news:ZM9td.137651$SW3.79811@fed1read01... > The RE 3.5 kit was all I needed to start with. It was better than a stock > ride. I had bilstein shocks with mine. > KH > > "Carl Saiyed" > wrote in message > ... > > Also, what else did you need? IE, track bar, T-case drop, ect. > > > > Carl > > "Carl Saiyed" > wrote in message > > ... > >> So you reccomend the 3.5" Lift kit w/rear springs and the Old Man Emu > >> shocks? > >> > >> Carl > >> > >> "Jim Kelly" > wrote in message > >> news:Ts9td.153399$5K2.138862@attbi_s03... > >> > I have had the RE 6025 suspension on my Jeep for over a year now. Also > >> have > >> > the DT 3000 shocks. The shocks are pretty stiff, but the suspension is > >> > leaps and bounds better than the stock ride...especially due to the > >> sagging > >> > I'm sure you're having with the age of your Jeep. If I could do it > >> > over > >> > again, I would've gone with the OME shocks. The offroad benefits of > >> > the > >> > lift are amazing. It's nice to stuff 31x10.50s under an XJ for the > > price > >> of > >> > this lift. > >> > > >> > Jim > >> > 94XJ > >> > > >> > "Carl Saiyed" > wrote in message > >> > ... > >> > > Some of you may remember that I was planning on putting a 2" coil > > spacer > >> > > lift on my 89 Cherokee. After exhaustive research, I have decided > >> > > this > >> is > >> > > probably not the best option for me. > >> > > > >> > > I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear > >> > > springs. > >> How > >> > > good is the ride of this kit compared to stock? How is it compared to > >> the > >> > > "Super-flex" kit (w/rear springs)? I will be buying a kit with new > > rear > >> > > springs, NOT Add-a-Leaf. > >> > > > >> > > Experiance with these kits? > >> > > > >> > > Also, I am looking at the Doestch 3000 shocks. Do I need the 4-6" > >> > > lift > >> > ones > >> > > or the stock legnth? Could I put the 4-6" lift shocks on now (stock > >> > height) > >> > > and put the kit on in a few months? > >> > > > >> > > Thanks, > >> > > > >> > > Carl > >> > > > >> > > > >> > > > >> > > >> > > >> > >> > > > > > > |
Ads |
#12
|
|||
|
|||
Hi Carl,
You may not need shims or a tcase drop. I put the 4.5" RE kit on mine. It has the same rear springs but with longer shackles that had the effect of tipping the D35 pinion up. In order to get a parallel slope (minus 1 degree on the pinion to account for spring wrap) on the tcase output, I dropped the tcase cross member, but it wasn't enough to match the pinion angle and eliminate the ujoint vibes on the rear shaft. The solution for me was to shim the pinion *down* a few degrees. I'm guessing that you won't need to do that. After you install, measure your angles carefully and listen for vibes at all speeds. You can assemble your own tcase drop as required with bolts and washers from the hardware store. Although it reduces your clearance, a tcase drop is good because it eases relative angles at the ujoints. When I replaced the D35 with a D44, the pinion was a bit lower so I was able to remove the shims. Another problem I had with the D35 was that the stock slip yoke was just barely hanging on the tcase output splines. This was cured by the longer pinion in the D44. Not sure if this issue was solely cased by the travel of my longer rear shackles, but you might want a RE1822 or a YJ yoke to avoid it. Another component lacking in the RE kit is rear bump stop extensions. Daystar makes them. Two differences between 'SuperRide' and 'SuperFlex'. SuperFlex comes with RE swaybar disconnects while 'SuperRide' has fixed links. I recommend you replace either ones with JKS Quickers or something comparable. The other difference is the rebuildable 'SuperFlex' joints in the lower control arms. These last indefinitely whereas rubber bushings like those in SuperRide require periodic replacement. Perhaps more importantly, the flex joints allow greater travel while the rubber bushings may cause the lower arms to be the limiting factor in articulation. Not sure though if your stock UCAs or track bar would limit first. Overall the quality of the RE components seems very good to me. Shop around to get a better price than that advertised on the RE site. I opted for OME shocks and I like them. I was thinking of the 3.5" kit when I was shopping around, but I settled on the 4.5" kit because I could fit 33x10.50 tires on my stock rims while deferring the fixed yoke conversion and new shaft upgrade. So far no regrets. Steve http://xjeep.dyndns.org Carl Saiyed wrote: > You didn't need axle shims, t-case drop, track bar or anything else? Just > the kit and the shocks? > > Sorry for asking so many times, I just don't want any suprises. > > Carl > > "Kevin in San Diego" > wrote in message > news:ZM9td.137651$SW3.79811@fed1read01... > >>The RE 3.5 kit was all I needed to start with. It was better than a stock >>ride. I had bilstein shocks with mine. >>KH >> >>"Carl Saiyed" > wrote in message ... >> >>>Also, what else did you need? IE, track bar, T-case drop, ect. >>> >>>Carl >>>"Carl Saiyed" > wrote in message ... >>> >>>>So you reccomend the 3.5" Lift kit w/rear springs and the Old Man Emu >>>>shocks? >>>> >>>>Carl >>>> >>>>"Jim Kelly" > wrote in message >>>>news:Ts9td.153399$5K2.138862@attbi_s03... >>>> >>>>>I have had the RE 6025 suspension on my Jeep for over a year now. > > Also > >>>>have >>>> >>>>>the DT 3000 shocks. The shocks are pretty stiff, but the suspension > > is > >>>>>leaps and bounds better than the stock ride...especially due to the >>>> >>>>sagging >>>> >>>>>I'm sure you're having with the age of your Jeep. If I could do it >>>>>over >>>>>again, I would've gone with the OME shocks. The offroad benefits of >>>>>the >>>>>lift are amazing. It's nice to stuff 31x10.50s under an XJ for the >>> >>>price >>> >>>>of >>>> >>>>>this lift. >>>>> >>>>>Jim >>>>>94XJ >>>>> >>>>>"Carl Saiyed" > wrote in message ... >>>>> >>>>>>Some of you may remember that I was planning on putting a 2" coil >>> >>>spacer >>> >>>>>>lift on my 89 Cherokee. After exhaustive research, I have decided >>>>>>this >>>> >>>>is >>>> >>>>>>probably not the best option for me. >>>>>> >>>>>>I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear >>>>>>springs. >>>> >>>>How >>>> >>>>>>good is the ride of this kit compared to stock? How is it compared > > to > >>>>the >>>> >>>>>>"Super-flex" kit (w/rear springs)? I will be buying a kit with new >>> >>>rear >>> >>>>>>springs, NOT Add-a-Leaf. >>>>>> >>>>>>Experiance with these kits? >>>>>> >>>>>>Also, I am looking at the Doestch 3000 shocks. Do I need the 4-6" >>>>>>lift >>>>> >>>>>ones >>>>> >>>>>>or the stock legnth? Could I put the 4-6" lift shocks on now (stock >>>>> >>>>>height) >>>>> >>>>>>and put the kit on in a few months? >>>>>> >>>>>>Thanks, >>>>>> >>>>>>Carl >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>> >> > > |
#13
|
|||
|
|||
Hi Carl,
You may not need shims or a tcase drop. I put the 4.5" RE kit on mine. It has the same rear springs but with longer shackles that had the effect of tipping the D35 pinion up. In order to get a parallel slope (minus 1 degree on the pinion to account for spring wrap) on the tcase output, I dropped the tcase cross member, but it wasn't enough to match the pinion angle and eliminate the ujoint vibes on the rear shaft. The solution for me was to shim the pinion *down* a few degrees. I'm guessing that you won't need to do that. After you install, measure your angles carefully and listen for vibes at all speeds. You can assemble your own tcase drop as required with bolts and washers from the hardware store. Although it reduces your clearance, a tcase drop is good because it eases relative angles at the ujoints. When I replaced the D35 with a D44, the pinion was a bit lower so I was able to remove the shims. Another problem I had with the D35 was that the stock slip yoke was just barely hanging on the tcase output splines. This was cured by the longer pinion in the D44. Not sure if this issue was solely cased by the travel of my longer rear shackles, but you might want a RE1822 or a YJ yoke to avoid it. Another component lacking in the RE kit is rear bump stop extensions. Daystar makes them. Two differences between 'SuperRide' and 'SuperFlex'. SuperFlex comes with RE swaybar disconnects while 'SuperRide' has fixed links. I recommend you replace either ones with JKS Quickers or something comparable. The other difference is the rebuildable 'SuperFlex' joints in the lower control arms. These last indefinitely whereas rubber bushings like those in SuperRide require periodic replacement. Perhaps more importantly, the flex joints allow greater travel while the rubber bushings may cause the lower arms to be the limiting factor in articulation. Not sure though if your stock UCAs or track bar would limit first. Overall the quality of the RE components seems very good to me. Shop around to get a better price than that advertised on the RE site. I opted for OME shocks and I like them. I was thinking of the 3.5" kit when I was shopping around, but I settled on the 4.5" kit because I could fit 33x10.50 tires on my stock rims while deferring the fixed yoke conversion and new shaft upgrade. So far no regrets. Steve http://xjeep.dyndns.org Carl Saiyed wrote: > You didn't need axle shims, t-case drop, track bar or anything else? Just > the kit and the shocks? > > Sorry for asking so many times, I just don't want any suprises. > > Carl > > "Kevin in San Diego" > wrote in message > news:ZM9td.137651$SW3.79811@fed1read01... > >>The RE 3.5 kit was all I needed to start with. It was better than a stock >>ride. I had bilstein shocks with mine. >>KH >> >>"Carl Saiyed" > wrote in message ... >> >>>Also, what else did you need? IE, track bar, T-case drop, ect. >>> >>>Carl >>>"Carl Saiyed" > wrote in message ... >>> >>>>So you reccomend the 3.5" Lift kit w/rear springs and the Old Man Emu >>>>shocks? >>>> >>>>Carl >>>> >>>>"Jim Kelly" > wrote in message >>>>news:Ts9td.153399$5K2.138862@attbi_s03... >>>> >>>>>I have had the RE 6025 suspension on my Jeep for over a year now. > > Also > >>>>have >>>> >>>>>the DT 3000 shocks. The shocks are pretty stiff, but the suspension > > is > >>>>>leaps and bounds better than the stock ride...especially due to the >>>> >>>>sagging >>>> >>>>>I'm sure you're having with the age of your Jeep. If I could do it >>>>>over >>>>>again, I would've gone with the OME shocks. The offroad benefits of >>>>>the >>>>>lift are amazing. It's nice to stuff 31x10.50s under an XJ for the >>> >>>price >>> >>>>of >>>> >>>>>this lift. >>>>> >>>>>Jim >>>>>94XJ >>>>> >>>>>"Carl Saiyed" > wrote in message ... >>>>> >>>>>>Some of you may remember that I was planning on putting a 2" coil >>> >>>spacer >>> >>>>>>lift on my 89 Cherokee. After exhaustive research, I have decided >>>>>>this >>>> >>>>is >>>> >>>>>>probably not the best option for me. >>>>>> >>>>>>I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear >>>>>>springs. >>>> >>>>How >>>> >>>>>>good is the ride of this kit compared to stock? How is it compared > > to > >>>>the >>>> >>>>>>"Super-flex" kit (w/rear springs)? I will be buying a kit with new >>> >>>rear >>> >>>>>>springs, NOT Add-a-Leaf. >>>>>> >>>>>>Experiance with these kits? >>>>>> >>>>>>Also, I am looking at the Doestch 3000 shocks. Do I need the 4-6" >>>>>>lift >>>>> >>>>>ones >>>>> >>>>>>or the stock legnth? Could I put the 4-6" lift shocks on now (stock >>>>> >>>>>height) >>>>> >>>>>>and put the kit on in a few months? >>>>>> >>>>>>Thanks, >>>>>> >>>>>>Carl >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>> >> > > |
#14
|
|||
|
|||
Yes, my 88 just needed the kit and shocks. Also RE lifts go on big and the
3.5 may look more like 4" when first installed. What year is yours carl. If its very new then it is more likely to have problems that need tweeking. KH "Carl Saiyed" > wrote in message ... > You didn't need axle shims, t-case drop, track bar or anything else? Just > the kit and the shocks? > > Sorry for asking so many times, I just don't want any suprises. > > Carl > > "Kevin in San Diego" > wrote in message > news:ZM9td.137651$SW3.79811@fed1read01... >> The RE 3.5 kit was all I needed to start with. It was better than a stock >> ride. I had bilstein shocks with mine. >> KH >> >> "Carl Saiyed" > wrote in message >> ... >> > Also, what else did you need? IE, track bar, T-case drop, ect. >> > >> > Carl >> > "Carl Saiyed" > wrote in message >> > ... >> >> So you reccomend the 3.5" Lift kit w/rear springs and the Old Man Emu >> >> shocks? >> >> >> >> Carl >> >> >> >> "Jim Kelly" > wrote in message >> >> news:Ts9td.153399$5K2.138862@attbi_s03... >> >> > I have had the RE 6025 suspension on my Jeep for over a year now. > Also >> >> have >> >> > the DT 3000 shocks. The shocks are pretty stiff, but the suspension > is >> >> > leaps and bounds better than the stock ride...especially due to the >> >> sagging >> >> > I'm sure you're having with the age of your Jeep. If I could do it >> >> > over >> >> > again, I would've gone with the OME shocks. The offroad benefits of >> >> > the >> >> > lift are amazing. It's nice to stuff 31x10.50s under an XJ for the >> > price >> >> of >> >> > this lift. >> >> > >> >> > Jim >> >> > 94XJ >> >> > >> >> > "Carl Saiyed" > wrote in message >> >> > ... >> >> > > Some of you may remember that I was planning on putting a 2" coil >> > spacer >> >> > > lift on my 89 Cherokee. After exhaustive research, I have decided >> >> > > this >> >> is >> >> > > probably not the best option for me. >> >> > > >> >> > > I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear >> >> > > springs. >> >> How >> >> > > good is the ride of this kit compared to stock? How is it compared > to >> >> the >> >> > > "Super-flex" kit (w/rear springs)? I will be buying a kit with new >> > rear >> >> > > springs, NOT Add-a-Leaf. >> >> > > >> >> > > Experiance with these kits? >> >> > > >> >> > > Also, I am looking at the Doestch 3000 shocks. Do I need the 4-6" >> >> > > lift >> >> > ones >> >> > > or the stock legnth? Could I put the 4-6" lift shocks on now >> >> > > (stock >> >> > height) >> >> > > and put the kit on in a few months? >> >> > > >> >> > > Thanks, >> >> > > >> >> > > Carl >> >> > > >> >> > > >> >> > > >> >> > >> >> > >> >> >> >> >> > >> > >> >> > > |
#15
|
|||
|
|||
Yes, my 88 just needed the kit and shocks. Also RE lifts go on big and the
3.5 may look more like 4" when first installed. What year is yours carl. If its very new then it is more likely to have problems that need tweeking. KH "Carl Saiyed" > wrote in message ... > You didn't need axle shims, t-case drop, track bar or anything else? Just > the kit and the shocks? > > Sorry for asking so many times, I just don't want any suprises. > > Carl > > "Kevin in San Diego" > wrote in message > news:ZM9td.137651$SW3.79811@fed1read01... >> The RE 3.5 kit was all I needed to start with. It was better than a stock >> ride. I had bilstein shocks with mine. >> KH >> >> "Carl Saiyed" > wrote in message >> ... >> > Also, what else did you need? IE, track bar, T-case drop, ect. >> > >> > Carl >> > "Carl Saiyed" > wrote in message >> > ... >> >> So you reccomend the 3.5" Lift kit w/rear springs and the Old Man Emu >> >> shocks? >> >> >> >> Carl >> >> >> >> "Jim Kelly" > wrote in message >> >> news:Ts9td.153399$5K2.138862@attbi_s03... >> >> > I have had the RE 6025 suspension on my Jeep for over a year now. > Also >> >> have >> >> > the DT 3000 shocks. The shocks are pretty stiff, but the suspension > is >> >> > leaps and bounds better than the stock ride...especially due to the >> >> sagging >> >> > I'm sure you're having with the age of your Jeep. If I could do it >> >> > over >> >> > again, I would've gone with the OME shocks. The offroad benefits of >> >> > the >> >> > lift are amazing. It's nice to stuff 31x10.50s under an XJ for the >> > price >> >> of >> >> > this lift. >> >> > >> >> > Jim >> >> > 94XJ >> >> > >> >> > "Carl Saiyed" > wrote in message >> >> > ... >> >> > > Some of you may remember that I was planning on putting a 2" coil >> > spacer >> >> > > lift on my 89 Cherokee. After exhaustive research, I have decided >> >> > > this >> >> is >> >> > > probably not the best option for me. >> >> > > >> >> > > I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear >> >> > > springs. >> >> How >> >> > > good is the ride of this kit compared to stock? How is it compared > to >> >> the >> >> > > "Super-flex" kit (w/rear springs)? I will be buying a kit with new >> > rear >> >> > > springs, NOT Add-a-Leaf. >> >> > > >> >> > > Experiance with these kits? >> >> > > >> >> > > Also, I am looking at the Doestch 3000 shocks. Do I need the 4-6" >> >> > > lift >> >> > ones >> >> > > or the stock legnth? Could I put the 4-6" lift shocks on now >> >> > > (stock >> >> > height) >> >> > > and put the kit on in a few months? >> >> > > >> >> > > Thanks, >> >> > > >> >> > > Carl >> >> > > >> >> > > >> >> > > >> >> > >> >> > >> >> >> >> >> > >> > >> >> > > |
#16
|
|||
|
|||
Mine is an 89 Cherokee Pioneer 5spd. 4.0Liter, D35 rear.
Carl "Kevin in San Diego" > wrote in message news:cibtd.137737$SW3.99917@fed1read01... > Yes, my 88 just needed the kit and shocks. Also RE lifts go on big and the > 3.5 may look more like 4" when first installed. What year is yours carl. If > its very new then it is more likely to have problems that need tweeking. > KH > > "Carl Saiyed" > wrote in message > ... > > You didn't need axle shims, t-case drop, track bar or anything else? Just > > the kit and the shocks? > > > > Sorry for asking so many times, I just don't want any suprises. > > > > Carl > > > > "Kevin in San Diego" > wrote in message > > news:ZM9td.137651$SW3.79811@fed1read01... > >> The RE 3.5 kit was all I needed to start with. It was better than a stock > >> ride. I had bilstein shocks with mine. > >> KH > >> > >> "Carl Saiyed" > wrote in message > >> ... > >> > Also, what else did you need? IE, track bar, T-case drop, ect. > >> > > >> > Carl > >> > "Carl Saiyed" > wrote in message > >> > ... > >> >> So you reccomend the 3.5" Lift kit w/rear springs and the Old Man Emu > >> >> shocks? > >> >> > >> >> Carl > >> >> > >> >> "Jim Kelly" > wrote in message > >> >> news:Ts9td.153399$5K2.138862@attbi_s03... > >> >> > I have had the RE 6025 suspension on my Jeep for over a year now. > > Also > >> >> have > >> >> > the DT 3000 shocks. The shocks are pretty stiff, but the suspension > > is > >> >> > leaps and bounds better than the stock ride...especially due to the > >> >> sagging > >> >> > I'm sure you're having with the age of your Jeep. If I could do it > >> >> > over > >> >> > again, I would've gone with the OME shocks. The offroad benefits of > >> >> > the > >> >> > lift are amazing. It's nice to stuff 31x10.50s under an XJ for the > >> > price > >> >> of > >> >> > this lift. > >> >> > > >> >> > Jim > >> >> > 94XJ > >> >> > > >> >> > "Carl Saiyed" > wrote in message > >> >> > ... > >> >> > > Some of you may remember that I was planning on putting a 2" coil > >> > spacer > >> >> > > lift on my 89 Cherokee. After exhaustive research, I have decided > >> >> > > this > >> >> is > >> >> > > probably not the best option for me. > >> >> > > > >> >> > > I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear > >> >> > > springs. > >> >> How > >> >> > > good is the ride of this kit compared to stock? How is it compared > > to > >> >> the > >> >> > > "Super-flex" kit (w/rear springs)? I will be buying a kit with new > >> > rear > >> >> > > springs, NOT Add-a-Leaf. > >> >> > > > >> >> > > Experiance with these kits? > >> >> > > > >> >> > > Also, I am looking at the Doestch 3000 shocks. Do I need the 4-6" > >> >> > > lift > >> >> > ones > >> >> > > or the stock legnth? Could I put the 4-6" lift shocks on now > >> >> > > (stock > >> >> > height) > >> >> > > and put the kit on in a few months? > >> >> > > > >> >> > > Thanks, > >> >> > > > >> >> > > Carl > >> >> > > > >> >> > > > >> >> > > > >> >> > > >> >> > > >> >> > >> >> > >> > > >> > > >> > >> > > > > > > |
#17
|
|||
|
|||
Mine is an 89 Cherokee Pioneer 5spd. 4.0Liter, D35 rear.
Carl "Kevin in San Diego" > wrote in message news:cibtd.137737$SW3.99917@fed1read01... > Yes, my 88 just needed the kit and shocks. Also RE lifts go on big and the > 3.5 may look more like 4" when first installed. What year is yours carl. If > its very new then it is more likely to have problems that need tweeking. > KH > > "Carl Saiyed" > wrote in message > ... > > You didn't need axle shims, t-case drop, track bar or anything else? Just > > the kit and the shocks? > > > > Sorry for asking so many times, I just don't want any suprises. > > > > Carl > > > > "Kevin in San Diego" > wrote in message > > news:ZM9td.137651$SW3.79811@fed1read01... > >> The RE 3.5 kit was all I needed to start with. It was better than a stock > >> ride. I had bilstein shocks with mine. > >> KH > >> > >> "Carl Saiyed" > wrote in message > >> ... > >> > Also, what else did you need? IE, track bar, T-case drop, ect. > >> > > >> > Carl > >> > "Carl Saiyed" > wrote in message > >> > ... > >> >> So you reccomend the 3.5" Lift kit w/rear springs and the Old Man Emu > >> >> shocks? > >> >> > >> >> Carl > >> >> > >> >> "Jim Kelly" > wrote in message > >> >> news:Ts9td.153399$5K2.138862@attbi_s03... > >> >> > I have had the RE 6025 suspension on my Jeep for over a year now. > > Also > >> >> have > >> >> > the DT 3000 shocks. The shocks are pretty stiff, but the suspension > > is > >> >> > leaps and bounds better than the stock ride...especially due to the > >> >> sagging > >> >> > I'm sure you're having with the age of your Jeep. If I could do it > >> >> > over > >> >> > again, I would've gone with the OME shocks. The offroad benefits of > >> >> > the > >> >> > lift are amazing. It's nice to stuff 31x10.50s under an XJ for the > >> > price > >> >> of > >> >> > this lift. > >> >> > > >> >> > Jim > >> >> > 94XJ > >> >> > > >> >> > "Carl Saiyed" > wrote in message > >> >> > ... > >> >> > > Some of you may remember that I was planning on putting a 2" coil > >> > spacer > >> >> > > lift on my 89 Cherokee. After exhaustive research, I have decided > >> >> > > this > >> >> is > >> >> > > probably not the best option for me. > >> >> > > > >> >> > > I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear > >> >> > > springs. > >> >> How > >> >> > > good is the ride of this kit compared to stock? How is it compared > > to > >> >> the > >> >> > > "Super-flex" kit (w/rear springs)? I will be buying a kit with new > >> > rear > >> >> > > springs, NOT Add-a-Leaf. > >> >> > > > >> >> > > Experiance with these kits? > >> >> > > > >> >> > > Also, I am looking at the Doestch 3000 shocks. Do I need the 4-6" > >> >> > > lift > >> >> > ones > >> >> > > or the stock legnth? Could I put the 4-6" lift shocks on now > >> >> > > (stock > >> >> > height) > >> >> > > and put the kit on in a few months? > >> >> > > > >> >> > > Thanks, > >> >> > > > >> >> > > Carl > >> >> > > > >> >> > > > >> >> > > > >> >> > > >> >> > > >> >> > >> >> > >> > > >> > > >> > >> > > > > > > |
#18
|
|||
|
|||
Carl,
'Super-Ride' is just a marketing name to make a cheaper option sound more appealing. I doubt that ride comfort is significantly better. Don't worry, either kit with OME shocks will give you a *much* better ride than your sagged out 15 year old stock suspension. The 3.5" kit can later be upgraded to 4.5" by adding longer rear shackles, front coil spring spacers, longer upper control arms, and a longer track bar. If you think this may be in your future, consider substituting adjustable lower control arms for another $20 each. Note that the OME shock has a small circlip to hold the retaining washer that centers it on its bar pin. The clips can be difficult to install correctly and have been known to pop off allowing the shock to slide around on the pin. Haven't had trouble with mine, but I recently tack welded the retaining washers to the pins to be safe. The OME design preloads the bushing so bar pin eliminators aren't required, but they can be used to avoid the circlip failure issue: http://jeephorizons.com/phpbb/viewtopic.php?t=1310 Be sure to order the long shocks: OME N35L (front): 26.7" open, 15.7" compressed OME N36L (rear) : 24.5" open, 14.6" compressed The standard size is definitely too short for your lift, but the 'L' size may be on the long side so be double sure that your bump stops are extended far enough to hit the axles well before the shocks are fully compressed. The RE6030 kit lists on the RE site for $680. I recall getting quotes from online dealers for less than $480 so shop around. Steve http://xjeep.dyndns.org Carl Saiyed wrote: > Thanks, Steve. Does the "Super-Ride" really ride much better than the > "Super-flex"? I'd perfer the super-flex but I don't want to get a much less > than stock ride. I'll be getting Old Man Emu shocks. > > Carl |
#19
|
|||
|
|||
I bought my lift (albeit the 6025) from Bob Supplee. I highly recommend
him. Quick and very helpful. A quick google search will yield his contact information. Jim 94XJ "Steve" > wrote in message ... > The RE6030 kit lists on the RE site for $680. I recall getting quotes > from online dealers for less than $480 so shop around. > > Steve > http://xjeep.dyndns.org > > |
#20
|
|||
|
|||
Sorry for the hijacked thread...
Jim... you wouldn't happen to be in PA would you? I know it's likely a common name, but I work w/ someone with the same name and am just curious... I'm in Little Rock myself. "Jim Kelly" > wrote in message news:F3mtd.156781$5K2.35299@attbi_s03... >I bought my lift (albeit the 6025) from Bob Supplee. I highly recommend > him. Quick and very helpful. A quick google search will yield his > contact > information. > > Jim > 94XJ > > "Steve" > wrote in message > ... >> The RE6030 kit lists on the RE site for $680. I recall getting quotes >> from online dealers for less than $480 so shop around. >> >> Steve >> http://xjeep.dyndns.org >> >> > > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jeep TJ Rubicon Express Springs w/ winch? | Derek Proctor | Jeep | 0 | December 1st 04 11:48 PM |
Jeep Rubicon Show & Shine THIS FRIDAY! | JenPete | 4x4 | 0 | August 20th 04 12:06 AM |
Rubicon Express in OKC? | Dave H | 4x4 | 0 | April 15th 04 03:55 AM |