If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Is Honda brake fluid really superior to its "clone"?
Greetings,
3 years have gone (so quickly) since I bought my brand new Honda Accord 2001 and the "Maintenance Schdule for Severe Conditions" official sheet from my Honda dealer says that its time to replace the brake fluid. It says "Use Honda DOT 3". My Honda dealer wants $80 for this service. A local automobile service shop wants only $35 for this. But when I asked whether he uses a genuine Honda DOT 3 fluid, he said: "what I use is DOT 3 or 4 compatible". Which means the container of his brake fluid doesn't carry the Honda logo. To which he answered: "Honda doesn't make its fluids anyway". My question is simple: Is the Honda DOT 3 really that special/superior or is it marked up simply because it carries the Honda logo? Thanks, Daniel |
Ads |
#2
|
|||
|
|||
Of course it's superior.... it costs more don't it!
____________________________________ Do not write below this line. Reserved for me. |
#3
|
|||
|
|||
Daniel wrote:
> Greetings, > 3 years have gone (so quickly) since I bought my brand new Honda > Accord 2001 and the "Maintenance Schdule for Severe Conditions" > official sheet from my Honda dealer says that its time to replace the > brake fluid. It says "Use Honda DOT 3". > > My Honda dealer wants $80 for this service. > A local automobile service shop wants only $35 for this. > > But when I asked whether he uses a genuine Honda DOT 3 fluid, he said: > "what I use is DOT 3 or 4 compatible". > > Which means the container of his brake fluid doesn't carry the Honda > logo. To which he answered: "Honda doesn't make its fluids anyway". > > My question is simple: Is the Honda DOT 3 really that special/superior > or is it marked up simply because it carries the Honda logo? > > Thanks, > Daniel ============================ You have to use Honda Z1 ATF, or Honda steering pump fluid, or Dual Pump Fluid for AWD, but brake fluid is just brake fluid. Use whatever you want, as long as it's Dot 3 or Dot 4. It's good that you're following the schedule . . You probably even read the manual . . . Cool. The next owner of your car will be a lucky person. 'Curly' |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
Daniel wrote:
> Greetings, > 3 years have gone (so quickly) since I bought my brand new Honda > Accord 2001 and the "Maintenance Schdule for Severe Conditions" > official sheet from my Honda dealer says that its time to replace the > brake fluid. It says "Use Honda DOT 3". > > My Honda dealer wants $80 for this service. > A local automobile service shop wants only $35 for this. i can do it with a mityvac and under an hour for about $6. that local shop price is damn good. > > But when I asked whether he uses a genuine Honda DOT 3 fluid, he said: > "what I use is DOT 3 or 4 compatible". as long as DOT5/silicone isnt used, its all good. > > Which means the container of his brake fluid doesn't carry the Honda > logo. To which he answered: "Honda doesn't make its fluids anyway". they dont > > My question is simple: Is the Honda DOT 3 really that special/superior > or is it marked up simply because it carries the Honda logo? brake fluid and oil are 2 fluids in which case it doesnt matter what you use. anything else, like tranny oil, auto trans fluid, and coolant will start a flame war |
#6
|
|||
|
|||
Alex Rodriguez wrote: > In article >, > says... > >>My question is simple: Is the Honda DOT 3 really that special/superior >>or is it marked up simply because it carries the Honda logo? > > > Nothing special about Honda brake fluid. I would use a good dot 3 fluid > and not worry about it. Basically Honda DOT 3 is a "heavy duty" fluid with a high dry boiling temperature. However - the boiling temp is going to decrease substantially when it inevitably absorbs moisture. It's likely similar to something like Quaker State "Heeavy Duty DOT 3". I'd say regular DOT 3 or DOT 4 is the way to go. If you really want the good stuff, Valvoline SynPower is a DOT 4 fluid that goes a bit beyond the DOT 4 requirements, and has a really high dry boiling point. You might even try a DOT 5.1 (non-silicone) fluid, which is a lot pricier, but compatible with standard DOT 3 or DOT 4 fluids. <http://www.pitposse.com/mobrfld5.html> <http://www.motorspot.com/dot51.html> <http://www.phattire.com/hopdot51brak.html> <http://www.phillcomrally.com/Motul/BrakeFluids.htm> "DOT 5.1" results from Yahoo Shopping: <http://tinyurl.com/5mkgb> |
#7
|
|||
|
|||
y_p_w wrote:
> > Basically Honda DOT 3 is a "heavy duty" fluid with a high dry boiling > temperature. However - the boiling temp is going to decrease > substantially when it inevitably absorbs moisture. It's likely > similar to something like Quaker State "Heeavy Duty DOT 3". > > I'd say regular DOT 3 or DOT 4 is the way to go. If you really want > the good stuff, Valvoline SynPower is a DOT 4 fluid that goes a bit > beyond the DOT 4 requirements, and has a really high dry boiling point. > You might even try a DOT 5.1 (non-silicone) fluid, which is a lot > pricier, but compatible with standard DOT 3 or DOT 4 fluids. > > <http://www.pitposse.com/mobrfld5.html> > <http://www.motorspot.com/dot51.html> > <http://www.phattire.com/hopdot51brak.html> > <http://www.phillcomrally.com/Motul/BrakeFluids.htm> > > "DOT 5.1" results from Yahoo Shopping: > <http://tinyurl.com/5mkgb> > Wow! Thank you very much for this detailed and learned answer. Thanks to everyone else who replied to my posting as well. Based on your answers I scheduled an appointment to do my 30K miles maintenance (break fluid, transmission fluid, etc.) in the local shop. It will save me at least $150... Sometimes you just have to say No. :-) Regards, Daniel |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Green Brake Fluid | coffee01 | Corvette | 4 | January 15th 05 08:06 PM |
Why Are Honda CR-V's Catching Fire? | Sparky | Honda | 4 | October 19th 04 05:35 PM |
1990 honda civic dx brake problem | budz | Honda | 5 | October 11th 04 11:20 AM |
2002 CR-V brake fluid bleed | Robert | Honda | 1 | September 25th 04 04:26 AM |