If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Door seal/gaps
I noticed on my 04 Accord coupe that the passenger side door doesn't
line up very well. The rubber seal at the very top, visible with the door closed from the outside, doesn't make contact during the last 6 inches or so, starting from the rear of the door. Also, the tiny horizontal ledge above the door handle (and right below the window) is higher than the matching rear quarter panel. Also, the bottom on the door is sunk in a little too far. The drivers door matches up perfectly. Take a look at your 03-05 coupe, is yours like this? |
Ads |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
The thing is, I don't remember it being like this during the 1st year
or so of ownership. Very strange. It looks like the door just needs to be "twisted" back into alignment since the bottom is sunk in a little too far. Also, I can find no signs of repair. It looks perfect inside and out. |
Thread Tools | |
Display Modes | |
|
|