If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
On Sun, 9 Jan 2005 13:00:42 -0800, Den wrote:
> Hi Guys > I have been trying to get my son's old Msffb gameport wheel to work for > him,i ordered a rockfire rm203 (USB converter) from the states,after > connecting to computer using sidewinder 4.0 software {mode 3} i get 4 button > 4 axis,it comes up with z rotation etc,it will not recognise it as a wheel,i > have tried all modes to the same response.If anyone out there has a similar > config would you please advise how you got the wheel to be recognised. Hi Den, you should be able to use the wheel now in most sims if the axises axae ;-) are recognized by windows / dx calibration. I guess your problem is with the sw profiling software then? Most modern sims allow you to customize ff in-game or by editing text-based ini files, so you might want to try without the profiler software first. All the best, uwe -- GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61 |
Ads |
#2
|
|||
|
|||
OT Rockfire install?
Hi Guys
I have been trying to get my son's old Msffb gameport wheel to work for him,i ordered a rockfire rm203 (USB converter) from the states,after connecting to computer using sidewinder 4.0 software {mode 3} i get 4 button 4 axis,it comes up with z rotation etc,it will not recognise it as a wheel,i have tried all modes to the same response.If anyone out there has a similar config would you please advise how you got the wheel to be recognised. Athlon 2000 A7N8X-X MB 512 ram GF2 ti card wins XP Thanks in Advance Den |
#3
|
|||
|
|||
On Sun, 9 Jan 2005 13:00:42 -0800, "Den" > wrote:
>Hi Guys >I have been trying to get my son's old Msffb gameport wheel to work for >him,i ordered a rockfire rm203 (USB converter) from the states,after >connecting to computer using sidewinder 4.0 software {mode 3} i get 4 button >4 axis,it comes up with z rotation etc,it will not recognise it as a wheel,i >have tried all modes to the same response.If anyone out there has a similar >config would you please advise how you got the wheel to be recognised. >Athlon 2000 >A7N8X-X MB >512 ram >GF2 ti card >wins XP >Thanks in Advance AFAIK the A7N8X-X does have a gameport connection. You might have to buy a connector for it (should be cheap). Cheers! Remco |
#4
|
|||
|
|||
Thanks Uwe for your reply,unfortunatly i did not make myself clear,it comes
up with 4 button 4 axis but it will not let me calibrate,also the wheel is not showing any calibration, (in any of the 4 modes on the rockfire) if i directly connect my own wheel (Msffb-usb} the system recognises it instantly,so the system is fine just will not recognise the gameport version connected through the Rockfire adaptor. TIA den "Den" > wrote in message ... > Hi Guys > I have been trying to get my son's old Msffb gameport wheel to work for > him,i ordered a rockfire rm203 (USB converter) from the states,after > connecting to computer using sidewinder 4.0 software {mode 3} i get 4 button > 4 axis,it comes up with z rotation etc,it will not recognise it as a wheel,i > have tried all modes to the same response.If anyone out there has a similar > config would you please advise how you got the wheel to be recognised. > Athlon 2000 > A7N8X-X MB > 512 ram > GF2 ti card > wins XP > Thanks in Advance > Den > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
92 grand caravan w/3.3L, install a tach? | Merlin | Chrysler | 0 | December 7th 04 05:11 PM |
changing a german f1c install to english? | Uwe Schürkamp | Simulators | 1 | November 2nd 04 09:55 PM |
OT - Had a really weird game install problem. | elrikk | Simulators | 3 | October 29th 04 02:30 PM |