If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Can rotating the tires extend their life by 20%?
pws > wrote in
: > Snap-on is great too, but I love Craftsman, which I think is a better > value since they generally costs less and do exactly what I need them > to. I had to use a "Husky" ratchet set not long ago and I can tell the > difference immediately. There is also a world of difference between a > Craftsman floor jack and that POS model you see on the shelf at > Autozone for $40.00. (or less) I can't, in good conscience, recommend snap-on to anyone but a professional. They're great tools, just way too expensive for the average guy. If you're making money from it and need the best, pay tons of money and get the best. But if you just want good quality tools, go Craftsman. As has been mentioned, their warranty is unbeatable, unfortunately, they don't cover _lost_ tools.. -Scott |
Ads |
#22
|
|||
|
|||
Can rotating the tires extend their life by 20%?
On 2007-03-26, Scott Hughes > wrote:
>> Lanny (and others), I may still take you up on that rotation tutorial >> at some point, but for now, can you recommend any specific things I >> should be looking for in the way of tools that are both good and easy >> to use? Maybe a compact Formula One-style lift would be too much to >> hope for, but like, what's a good jack and a good wrench, etc.? >> > > I got an inexpensive (about $30) 2 1/4 ton Craftsman floor jack that came > w/ a pair of jack stands. > I believe this is it (currently listed at $55 tho it goes on sale > regularly): > http://www.sears.com/sr/javasr/produ...id=00950138000 > > It works fine. I swap summer/winter wheels myself. The first couple > times I did it one at a time w/ the in-trunk jack (obviously, not an > option for rotating). So much easier/quicker w/ the floor jack & stands. > > One trick for speeding up the process if you have a cordless drill: Get > a socket attachement bit for your drill. I THINK I use a 1/2" socket - > don't remember for sure - it's a tiny bit loose, but there's no need for > a perfect fit. Once you use the lug wrench to loosen the lugs a bit, > swich to the drill rather than spinning them off by hand (going back on, > use the drill to get them semi-tight, then switch back to the lug wrench > or torque wrench if you have that). It won't do the whole job for you > like having an air wrench, but it probably trims a few minutes off the > job. I did the summer/winter changeover a few times using the OEM scissors jack and lug wrench. It's not fun. In addition to a floor jack (I sometimes wish I had spent more money on a lighter aluminum one), I use a speed wrench and a long flex handle (I know, I should use a torque wrench): http://www.sears.com/sr/javasr/produ...id=00944271000 http://www.sears.com/sr/javasr/produ...id=00904431000 Here's a kit with both: http://www.sears.com/sr/javasr/produ...id=00934389000 (Though I would prefer a longer flex-handle than that.) -- Grant Edwards grante Yow! I think I'll make at SCRAMBLED EGGS!! They're visi.com each in LITTLE SHELLS... |
#23
|
|||
|
|||
Can rotating the tires extend their life by 20%?
On Mon, 26 Mar 2007 15:34:57 -0000, Grant Edwards >
wrote: >I did the summer/winter changeover a few times using the OEM >scissors jack and lug wrench. It's not fun. > >In addition to a floor jack (I sometimes wish I had spent more >money on a lighter aluminum one), I use a speed wrench and a >long flex handle (I know, I should use a torque wrench): There's nothing like air tools. Best investment I ever made. Set the air for the proper torque, and away you go. Entire job in less than 1/2 hour. I do check the torque by hand also. Two floor jacks help, as well. Tom |
#24
|
|||
|
|||
Can rotating the tires extend their life by 20%?
Scott Hughes wrote:
> I can't, in good conscience, recommend snap-on to anyone but a > professional. They're great tools, just way too expensive for the average > guy. If you're making money from it and need the best, pay tons of money > and get the best. But if you just want good quality tools, go Craftsman. > As has been mentioned, their warranty is unbeatable, unfortunately, they > don't cover _lost_ tools.. > > -Scott I completely agree. Craftsman makes something for anything I would work on the car with. Dunno why I mentioned Snap-On except maybe that I borrowed a Snap-On ratchet not long ago. I am not sure that I could say it is a better tool, both do the job nicely. Pat |
#25
|
|||
|
|||
Can rotating the tires extend their life by 20%?
In article >,
pws > wrote: > Dunno why I mentioned Snap-On except maybe that I borrowed a Snap-On > ratchet not long ago. I am not sure that I could say it is a better > tool, both do the job nicely. Snap-On and Mac tools are indeed better, both workmanship and metallurgy. Craftsman is only able to guarantee its tools for life because they're thick and heavy. The thinner walls on professional sockets, e.g., make them more versatile and easier to use in confined spaces than the relatively-klunky Craftsman sockets. But Craftsman is still a good value for most of us, who don't use our tools to make a living and can tolerate some klunkiness to save money on tools. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Get a new 330i or extend a lease? | Shant M | BMW | 34 | December 16th 05 02:37 PM |
To extend or not to extend....that is the question | Chris Burns | Chrysler | 5 | September 24th 05 10:30 AM |
Rotating tires -- Procomp directional treads | Steve | Jeep | 23 | September 16th 05 11:52 PM |
can you extend a vw lease? | Sam | VW water cooled | 4 | January 31st 05 12:32 PM |
need to extend my GM warranty | Rad | Corvette | 18 | October 19th 04 06:59 PM |