If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
97 JGC - Hi-beams not staying on when lights in "Auto" mode
The switch that keeps them on is not engaging but only in auto mode,
manual on is OK. When headlight selector switch is in "manual on" and i pull the turn signal arm to activate the hi-beams, the hi-beams come on and stay on. When the headlight selector switch is in "Auto" and i pull on the turn signal switch, the hibeams dont stay on. Is there some relay that makes that work? . Im puzzled becuase the turn signal arm lo/hi beam mechanism works ok if the selctor switch is in the maunal mode. It worked the other night, but i had some mechanic look at it the other day for the AC, turns out the evaporator coil is leaking , a whopper ( 1200 CDN) of job ( I told the guy id think about it ). But thats another email. I dont if when looking at my ac , there is something that could have been disconnected. thx, James |
Ads |
#2
|
|||
|
|||
I think it maybe the Auto Headlamp Relay .
James Tinkess wrote: > The switch that keeps them on is not engaging but only in auto mode, > manual on is OK. > > When headlight selector switch is in "manual on" and i pull the turn > signal arm to activate the hi-beams, the hi-beams come on and stay on. > > When the headlight selector switch is in "Auto" and i pull on the turn > signal switch, the hibeams dont stay on. > > Is there some relay that makes that work? . Im puzzled becuase the turn > signal arm > lo/hi beam mechanism works ok if the selctor switch is in the maunal mode. > > > It worked the other night, but i had some mechanic look at it the other > day for the AC, turns out the evaporator coil is leaking , a whopper ( > 1200 CDN) of job ( I told the guy id think about it ). But thats another > email. I dont if when looking at my ac , there is something that could > have been disconnected. > > > > > thx, > James |
#3
|
|||
|
|||
Actually I dont even get my headlight on "Auto" mode, just the DRL.
I think the Auto HL relay is the first place to stop. James Tinkess wrote: > I think it maybe the Auto Headlamp Relay . > > James Tinkess wrote: > >> The switch that keeps them on is not engaging but only in auto mode, >> manual on is OK. >> >> When headlight selector switch is in "manual on" and i pull the turn >> signal arm to activate the hi-beams, the hi-beams come on and stay on. >> >> When the headlight selector switch is in "Auto" and i pull on the turn >> signal switch, the hibeams dont stay on. >> >> Is there some relay that makes that work? . Im puzzled becuase the >> turn signal arm >> lo/hi beam mechanism works ok if the selctor switch is in the maunal >> mode. >> >> >> It worked the other night, but i had some mechanic look at it the other >> day for the AC, turns out the evaporator coil is leaking , a whopper ( >> 1200 CDN) of job ( I told the guy id think about it ). But thats >> another email. I dont if when looking at my ac , there is something >> that could have been disconnected. >> >> >> >> >> thx, >> James |
#4
|
|||
|
|||
Some rocket scientist mechanic had put the relay into the unused slot.
Alldata saves my butt again!! PoBoy wrote: > Actually I dont even get my headlight on "Auto" mode, just the DRL. > I think the Auto HL relay is the first place to stop. > > James Tinkess wrote: > >> I think it maybe the Auto Headlamp Relay . >> >> James Tinkess wrote: >> >>> The switch that keeps them on is not engaging but only in auto mode, >>> manual on is OK. >>> >>> When headlight selector switch is in "manual on" and i pull the >>> turn signal arm to activate the hi-beams, the hi-beams come on and >>> stay on. >>> >>> When the headlight selector switch is in "Auto" and i pull on the >>> turn signal switch, the hibeams dont stay on. >>> >>> Is there some relay that makes that work? . Im puzzled becuase the >>> turn signal arm >>> lo/hi beam mechanism works ok if the selctor switch is in the maunal >>> mode. >>> >>> >>> It worked the other night, but i had some mechanic look at it the other >>> day for the AC, turns out the evaporator coil is leaking , a whopper >>> ( 1200 CDN) of job ( I told the guy id think about it ). But thats >>> another email. I dont if when looking at my ac , there is something >>> that could have been disconnected. >>> >>> >>> >>> >>> thx, >>> James |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
99 Sunfire lights problem | bdeditch | Technology | 26 | February 27th 10 03:53 PM |
Pontiac Grand Prix instrument panel and other lights out? | [email protected] | Technology | 5 | March 25th 05 12:16 AM |
replacement lights for *95 stang....will cobra lights fit? | pheonix1t | Ford Mustang | 1 | December 21st 04 05:39 AM |
VW Golf 3 rear fog lights | Joseph Meehan | VW water cooled | 6 | October 30th 04 02:14 AM |
BMW service lights in the UK | spammy | BMW | 3 | September 18th 04 06:55 PM |