A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » VW water cooled
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

VW Polo '92, transmission problem



 
 
Thread Tools Display Modes
  #1  
Old December 25th 04, 10:41 PM
Kasper Holtze
external usenet poster
 
Posts: n/a
Default VW Polo '92, transmission problem

Hi

I have a VW Polo 1,3, 1992, with a dead transmission. I got a new one,
and opened the transmission fluid hole, to get ind some oil. But now I
can't get the plug back in.. Its located in the front of the
transmission, next to 3 other holes.. Isn't this where I put oil into
the transmission? And how do I get the plug back in? There seems to be
something in the hole, which I can push with a screwdriver, but still
can't get the plug back in..

Thanks

// Kasper
Ads
  #2  
Old December 25th 04, 11:08 PM
Kasper Holtze
external usenet poster
 
Posts: n/a
Default

crusts (you
will need one for the top also).
Boil the prepared delicacy until the meat starts to come off the bones.
Remove, de-bone and cube; continue to reduce the broth.
Brown the onions, peppers and celery.
Add the meat then season, continue browning.
De-glaze with sherry, add the reduced broth.
Finally, put in the root vegetables and simmer for 15 minutes.
Allow to cool slightly.
Place the pie pan in 375 degree oven for a few minutes so bottom crust is not soggy,
reduce oven to 325.
Fill the pie with stew, place top crust and with a fork, seal the crusts together
then poke holes in top.
Return to oven and bake for 30 minutes, or until pie crust is golden brown.



Sudden Infant Death Soup

SIDS: delicious in winter, comparable to old fashioned Beef and Vegetable Soup.
Its free, you can sell the crib, baby clothes, toys, stroller... and so easy to
procure if such a lucky find is at hand (just pick him up from the crib and
he?s good to go)!

SIDS victim, cleaned
½ cup cooking oil
Carrots
onions
broccoli
whole cabbage
fresh green beans
potato
turnip
celery
tomato
½ stick butter
1 cup cooked pasta (macaroni, shells, etc.)

Remove as much meat as possible, cube


  #3  
Old December 25th 04, 11:08 PM
Kasper Holtze
external usenet poster
 
Posts: n/a
Default

crusts (you
will need one for the top also).
Boil the prepared delicacy until the meat starts to come off the bones.
Remove, de-bone and cube; continue to reduce the broth.
Brown the onions, peppers and celery.
Add the meat then season, continue browning.
De-glaze with sherry, add the reduced broth.
Finally, put in the root vegetables and simmer for 15 minutes.
Allow to cool slightly.
Place the pie pan in 375 degree oven for a few minutes so bottom crust is not soggy,
reduce oven to 325.
Fill the pie with stew, place top crust and with a fork, seal the crusts together
then poke holes in top.
Return to oven and bake for 30 minutes, or until pie crust is golden brown.



Sudden Infant Death Soup

SIDS: delicious in winter, comparable to old fashioned Beef and Vegetable Soup.
Its free, you can sell the crib, baby clothes, toys, stroller... and so easy to
procure if such a lucky find is at hand (just pick him up from the crib and
he?s good to go)!

SIDS victim, cleaned
½ cup cooking oil
Carrots
onions
broccoli
whole cabbage
fresh green beans
potato
turnip
celery
tomato
½ stick butter
1 cup cooked pasta (macaroni, shells, etc.)

Remove as much meat as possible, cube


  #4  
Old December 26th 04, 12:07 AM
Woodchuck
external usenet poster
 
Posts: n/a
Default

pork butt.

5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped

Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.



Stillborn Stew

By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roasts (it is cheaper and better to
cut up a whole roast than to buy stew meat).

1 stillbirth, de-boned and cubed
¼ cup vegetable oil
2 large onions
bell pepper
celery
garlic
½ cup red wine
3 Irish potatoes
2 large car


  #5  
Old December 26th 04, 12:07 AM
Woodchuck
external usenet poster
 
Posts: n/a
Default

pork butt.

5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped

Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.



Stillborn Stew

By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roasts (it is cheaper and better to
cut up a whole roast than to buy stew meat).

1 stillbirth, de-boned and cubed
¼ cup vegetable oil
2 large onions
bell pepper
celery
garlic
½ cup red wine
3 Irish potatoes
2 large car


  #6  
Old December 26th 04, 12:49 AM
Woodchuck
external usenet poster
 
Posts: n/a
Default

Not sure what a polo looks like but I think you may taken the wrong plug
out. Got any pictures you can e-mail me?


"Kasper Holtze" > wrote in message
...
> Hi
>
> I have a VW Polo 1,3, 1992, with a dead transmission. I got a new one, and
> opened the transmission fluid hole, to get ind some oil. But now I can't
> get the plug back in.. Its located in the front of the transmission, next
> to 3 other holes.. Isn't this where I put oil into the transmission? And
> how do I get the plug back in? There seems to be something in the hole,
> which I can push with a screwdriver, but still can't get the plug back
> in..
>
> Thanks
>
> // Kasper




  #7  
Old December 26th 04, 12:49 AM
Woodchuck
external usenet poster
 
Posts: n/a
Default

Not sure what a polo looks like but I think you may taken the wrong plug
out. Got any pictures you can e-mail me?


"Kasper Holtze" > wrote in message
...
> Hi
>
> I have a VW Polo 1,3, 1992, with a dead transmission. I got a new one, and
> opened the transmission fluid hole, to get ind some oil. But now I can't
> get the plug back in.. Its located in the front of the transmission, next
> to 3 other holes.. Isn't this where I put oil into the transmission? And
> how do I get the plug back in? There seems to be something in the hole,
> which I can push with a screwdriver, but still can't get the plug back
> in..
>
> Thanks
>
> // Kasper




  #8  
Old December 26th 04, 11:25 PM
Kasper Holtze
external usenet poster
 
Posts: n/a
Default

I think I took out the wrong plug
I don't have a picture.. but it seems that there is something in the
hole, which the screw has to go in to.. that is not a problem, the
problem is that the "thing" inside the hole, is not close enough to the
transmission wall.. so the screw is stock about 1 cm from where it has
to be.. the screw is about 3cm long. Does it make any sense?

I've been trying for hours to get the screw back in, but without any luck


// Kasper



Woodchuck wrote:
> Not sure what a polo looks like but I think you may taken the wrong plug
> out. Got any pictures you can e-mail me?
>
>
> "Kasper Holtze" > wrote in message
> ...
>
>>Hi
>>
>>I have a VW Polo 1,3, 1992, with a dead transmission. I got a new one, and
>>opened the transmission fluid hole, to get ind some oil. But now I can't
>>get the plug back in.. Its located in the front of the transmission, next
>>to 3 other holes.. Isn't this where I put oil into the transmission? And
>>how do I get the plug back in? There seems to be something in the hole,
>>which I can push with a screwdriver, but still can't get the plug back
>>in..
>>
>>Thanks
>>
>>// Kasper

>
>
>
>

  #9  
Old December 26th 04, 11:25 PM
Kasper Holtze
external usenet poster
 
Posts: n/a
Default

I think I took out the wrong plug
I don't have a picture.. but it seems that there is something in the
hole, which the screw has to go in to.. that is not a problem, the
problem is that the "thing" inside the hole, is not close enough to the
transmission wall.. so the screw is stock about 1 cm from where it has
to be.. the screw is about 3cm long. Does it make any sense?

I've been trying for hours to get the screw back in, but without any luck


// Kasper



Woodchuck wrote:
> Not sure what a polo looks like but I think you may taken the wrong plug
> out. Got any pictures you can e-mail me?
>
>
> "Kasper Holtze" > wrote in message
> ...
>
>>Hi
>>
>>I have a VW Polo 1,3, 1992, with a dead transmission. I got a new one, and
>>opened the transmission fluid hole, to get ind some oil. But now I can't
>>get the plug back in.. Its located in the front of the transmission, next
>>to 3 other holes.. Isn't this where I put oil into the transmission? And
>>how do I get the plug back in? There seems to be something in the hole,
>>which I can push with a screwdriver, but still can't get the plug back
>>in..
>>
>>Thanks
>>
>>// Kasper

>
>
>
>

  #10  
Old December 27th 04, 01:43 AM
Woodchuck
external usenet poster
 
Posts: n/a
Default

You may get lucky if you use a longer bolt to pull the threaded piece out
some and then try to restart the original bolt.

"Kasper Holtze" > wrote in message
...
>I think I took out the wrong plug
> I don't have a picture.. but it seems that there is something in the hole,
> which the screw has to go in to.. that is not a problem, the problem is
> that the "thing" inside the hole, is not close enough to the transmission
> wall.. so the screw is stock about 1 cm from where it has to be.. the
> screw is about 3cm long. Does it make any sense?
>
> I've been trying for hours to get the screw back in, but without any luck
>
>
>
> // Kasper
>
>
>
> Woodchuck wrote:
>> Not sure what a polo looks like but I think you may taken the wrong plug
>> out. Got any pictures you can e-mail me?
>>
>>
>> "Kasper Holtze" > wrote in message
>> ...
>>
>>>Hi
>>>
>>>I have a VW Polo 1,3, 1992, with a dead transmission. I got a new one,
>>>and opened the transmission fluid hole, to get ind some oil. But now I
>>>can't get the plug back in.. Its located in the front of the
>>>transmission, next to 3 other holes.. Isn't this where I put oil into the
>>>transmission? And how do I get the plug back in? There seems to be
>>>something in the hole, which I can push with a screwdriver, but still
>>>can't get the plug back in..
>>>
>>>Thanks
>>>
>>>// Kasper

>>
>>
>>



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
caravan transmission problem Fujun Chen Chrysler 1 January 12th 05 09:53 PM
New *FREE* Corvette Discussion Forum JLA ENTERPRISES TECHNOLOGIES INTEGRATION Corvette 12 November 30th 04 06:36 PM
1997 civic transmission or ecu problem ?? Matt Honda 1 October 10th 04 05:00 PM


All times are GMT +1. The time now is 08:35 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.