auto fill device?

Does any one have a way to keep their water feature full with out doing it
by hand? I was thinking there must be something out there that can be tied
into a water supply that would open and shut off when a the water level
reaches a set level.
I would like to put something like that on my front yard water feature that
is just a whisky barrel that pumps water up through a hand pump. But need
to fill often here in Colorado unless I can find and install a device like I
am asking for help on.
You can see the set up at
http://www.ofoto.com/I.jsp?c=65zgxlu...&x=0&y=-n2twfr
Thank you for you help I know there must be some way to do this.
--
Greg &/or Kellie Meyer

"G & K Meyer" wrote in message
...
Does any one have a way to keep their water feature full with out doing it
by hand? I was thinking there must be something out there that can be
tied
into a water supply that would open and shut off when a the water level
reaches a set level.
I would like to put something like that on my front yard water feature
that
is just a whisky barrel that pumps water up through a hand pump. But need
to fill often here in Colorado unless I can find and install a device like
I
am asking for help on.
You can see the set up at
http://www.ofoto.com/I.jsp?c=65zgxlu...&x=0&y=-n2twfr
Thank you for you help I know there must be some way to do this.


See http://www.pvl.co.uk/balem1_anim.htm for a simple ball valve

--
Steve
Milk floats, stainless steel sinks

You can see the set up at
http://www.ofoto.com/I.jsp?c=65zgxlu...&x=0&y=-n2twfr
Thank you for you help I know there must be some way to do this.

Very cute and pretty. You took a small space and really made it into
something. ~ jan


~Power to the Porg, Flow On!~

On Sun, 16 Jan 2005 10:40:47 -0700, G & K Meyer wrote:
Does any one have a way to keep their water feature full with out doing it
by hand? I was thinking there must be something out there that can be tied
into a water supply that would open and shut off when a the water level
reaches a set level.

Toilet float valve, stock tank float valve, etc.

Or a timer that runs a certain amount of time every day, with an
overflow to dispose of excess.

sdb
--
Wanted: Omnibook 800 & accessories, cheap, working or not
sdbuse1 on mailhost bigfoot.com

Toilet float valve, stock tank float valve, etc.

Or a timer that runs a certain amount of time every day, with an
overflow to dispose of excess.

if you have an overflow, you might use a drip irrigation emitter

On or about Sun, 16 Jan 2005 15:17:04 -0700, Sylvan Butler
wrote something like:

On Sun, 16 Jan 2005 10:40:47 -0700, G & K Meyer wrote:
Does any one have a way to keep their water feature full with out doing it
by hand?

An ecellent aquarium keeper in another group long long ago maintained
a number of customers' tanks with a mechanism based on a refrigerator
ice maker fill control.
--
Crashj

G & K Meyer wrote:
Does any one have a way to keep their water feature full with out
doing it by hand?

I have a source of natural spring water (chlorine free) and have an
overflow, so there is a constant stream of fresh water. The inflow in
my case is rather large and equals about 1/2 volume per day.
--
Pardon my spam deterrent; send email to
18,000 gallon (17'x 47'x 2-4') lily pond garden in Zone 6
Cheers, Steve Henning in Reading, PA USA

Look into pool supply places. They sell a "toilet fill" technology type of
device that has a constant water supply to it. Pond gets low, the slide
valve drops and opens allowing water in. Water level goes up and the slide
does as well, closing the valve. They are not too terribly expensive.
"G & K Meyer" wrote in message
...
Does any one have a way to keep their water feature full with out doing it
by hand? I was thinking there must be something out there that can be
tied
into a water supply that would open and shut off when a the water level
reaches a set level.
I would like to put something like that on my front yard water feature
that
is just a whisky barrel that pumps water up through a hand pump. But need
to fill often here in Colorado unless I can find and install a device like
I
am asking for help on.
You can see the set up at
http://www.ofoto.com/I.jsp?c=65zgxlu...&x=0&y=-n2twfr
Thank you for you help I know there must be some way to do this.
--
Greg &/or Kellie Meyer

I use a stock tank filler from the local Farm Supply place. $12. I have it
tied directly into the sprinkler system mainline, so I needed a pressure
reducer valve.

For those of you using this setup on a large scale pond, be sure to put a
whole house filter in line to get rid of the chlorine before it goes in your
pond.

Jim

"Wildkarrde" wrote in message
...
Look into pool supply places. They sell a "toilet fill" technology type
of
device that has a constant water supply to it. Pond gets low, the slide
valve drops and opens allowing water in. Water level goes up and the
slide
does as well, closing the valve. They are not too terribly expensive.
"G & K Meyer" wrote in message
...
Does any one have a way to keep their water feature full with out doing
it
by hand? I was thinking there must be something out there that can be
tied
into a water supply that would open and shut off when a the water level
reaches a set level.
I would like to put something like that on my front yard water feature
that
is just a whisky barrel that pumps water up through a hand pump. But
need
to fill often here in Colorado unless I can find and install a device
like
I
am asking for help on.
You can see the set up at
http://www.ofoto.com/I.jsp?c=65zgxlu...&x=0&y=-n2twfr
Thank you for you help I know there must be some way to do this.
--
Greg &/or Kellie Meyer

Go right ahead and play russian roulette and chalk it up to your
laziness in maintaining your pond and rely on a filter which may or
may not be doing its job! Welcome you fit right into this group just
fine.......Did Jan turn you on to this gadget or did you discover it
all on your own? Probably the local farm supply clerk with that
extensive background in ponding and fish biology.

On Mon, 21 Feb 2005 12:04:54 -0600, "laskdfpoiwq"
wrote:

===I use a stock tank filler from the local Farm Supply place. $12. I have it
===tied directly into the sprinkler system mainline, so I needed a pressure
===reducer valve.
===
===For those of you using this setup on a large scale pond, be sure to put a
===whole house filter in line to get rid of the chlorine before it goes in your
===pond.
===
===Jim
===
==="Wildkarrde" wrote in message
...
=== Look into pool supply places. They sell a "toilet fill" technology type
=== of
=== device that has a constant water supply to it. Pond gets low, the slide
=== valve drops and opens allowing water in. Water level goes up and the
=== slide
=== does as well, closing the valve. They are not too terribly expensive.
=== "G & K Meyer" wrote in message
=== ...
=== Does any one have a way to keep their water feature full with out doing
=== it
=== by hand? I was thinking there must be something out there that can be
=== tied
=== into a water supply that would open and shut off when a the water level
=== reaches a set level.
=== I would like to put something like that on my front yard water feature
=== that
=== is just a whisky barrel that pumps water up through a hand pump. But
=== need
=== to fill often here in Colorado unless I can find and install a device
=== like
=== I
=== am asking for help on.
=== You can see the set up at
=== http://www.ofoto.com/I.jsp?c=65zgxlu...&x=0&y=-n2twfr
=== Thank you for you help I know there must be some way to do this.
=== --
=== Greg &/or Kellie Meyer
===
===
===
===
===
===
===
===
===